Annotation of OpenXM_contrib2/asir2000/gc5.3/os_dep.c, Revision 1.1
1.1 ! noro 1: int ox_usr1_sent, ox_int_received, critical_when_signal;
! 2: static int inside_critical_section;
! 3:
! 4: /*
! 5: * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
! 6: * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
! 7: * Copyright (c) 1996-1999 by Silicon Graphics. All rights reserved.
! 8: * Copyright (c) 1999 by Hewlett-Packard Company. All rights reserved.
! 9: *
! 10: * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
! 11: * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
! 12: *
! 13: * Permission is hereby granted to use or copy this program
! 14: * for any purpose, provided the above notices are retained on all copies.
! 15: * Permission to modify the code and to distribute modified code is granted,
! 16: * provided the above notices are retained, and a notice that the code was
! 17: * modified is included with the above copyright notice.
! 18: */
! 19:
! 20: # include "gc_priv.h"
! 21:
! 22: # if defined(LINUX) && !defined(POWERPC)
! 23: # include <linux/version.h>
! 24: # if (LINUX_VERSION_CODE <= 0x10400)
! 25: /* Ugly hack to get struct sigcontext_struct definition. Required */
! 26: /* for some early 1.3.X releases. Will hopefully go away soon. */
! 27: /* in some later Linux releases, asm/sigcontext.h may have to */
! 28: /* be included instead. */
! 29: # define __KERNEL__
! 30: # include <asm/signal.h>
! 31: # undef __KERNEL__
! 32: # else
! 33: /* Kernels prior to 2.1.1 defined struct sigcontext_struct instead of */
! 34: /* struct sigcontext. libc6 (glibc2) uses "struct sigcontext" in */
! 35: /* prototypes, so we have to include the top-level sigcontext.h to */
! 36: /* make sure the former gets defined to be the latter if appropriate. */
! 37: # include <features.h>
! 38: # if 2 <= __GLIBC__
! 39: # if 2 == __GLIBC__ && 0 == __GLIBC_MINOR__
! 40: /* glibc 2.1 no longer has sigcontext.h. But signal.h */
! 41: /* has the right declaration for glibc 2.1. */
! 42: # include <sigcontext.h>
! 43: # endif /* 0 == __GLIBC_MINOR__ */
! 44: # else /* not 2 <= __GLIBC__ */
! 45: /* libc5 doesn't have <sigcontext.h>: go directly with the kernel */
! 46: /* one. Check LINUX_VERSION_CODE to see which we should reference. */
! 47: # include <asm/sigcontext.h>
! 48: # endif /* 2 <= __GLIBC__ */
! 49: # endif
! 50: # endif
! 51: # if !defined(OS2) && !defined(PCR) && !defined(AMIGA) && !defined(MACOS)
! 52: # include <sys/types.h>
! 53: # if !defined(MSWIN32) && !defined(SUNOS4)
! 54: # include <unistd.h>
! 55: # endif
! 56: # endif
! 57:
! 58: # include <stdio.h>
! 59: # include <signal.h>
! 60:
! 61: /* Blatantly OS dependent routines, except for those that are related */
! 62: /* to dynamic loading. */
! 63:
! 64: # if !defined(THREADS) && !defined(STACKBOTTOM) && defined(HEURISTIC2)
! 65: # define NEED_FIND_LIMIT
! 66: # endif
! 67:
! 68: # if defined(IRIX_THREADS) || defined(HPUX_THREADS)
! 69: # define NEED_FIND_LIMIT
! 70: # endif
! 71:
! 72: # if (defined(SUNOS4) && defined(DYNAMIC_LOADING)) && !defined(PCR)
! 73: # define NEED_FIND_LIMIT
! 74: # endif
! 75:
! 76: # if (defined(SVR4) || defined(AUX) || defined(DGUX)) && !defined(PCR)
! 77: # define NEED_FIND_LIMIT
! 78: # endif
! 79:
! 80: # if defined(LINUX) && \
! 81: (defined(POWERPC) || defined(SPARC) || defined(ALPHA) || defined(IA64) \
! 82: || defined(MIPS))
! 83: # define NEED_FIND_LIMIT
! 84: # endif
! 85:
! 86: #ifdef NEED_FIND_LIMIT
! 87: # include <setjmp.h>
! 88: #endif
! 89:
! 90: #ifdef FREEBSD
! 91: # include <machine/trap.h>
! 92: #endif
! 93:
! 94: #ifdef AMIGA
! 95: # include <proto/exec.h>
! 96: # include <proto/dos.h>
! 97: # include <dos/dosextens.h>
! 98: # include <workbench/startup.h>
! 99: #endif
! 100:
! 101: #ifdef MSWIN32
! 102: # define WIN32_LEAN_AND_MEAN
! 103: # define NOSERVICE
! 104: # include <windows.h>
! 105: #endif
! 106:
! 107: #ifdef MACOS
! 108: # include <Processes.h>
! 109: #endif
! 110:
! 111: #ifdef IRIX5
! 112: # include <sys/uio.h>
! 113: # include <malloc.h> /* for locking */
! 114: #endif
! 115: #ifdef USE_MMAP
! 116: # include <sys/types.h>
! 117: # include <sys/mman.h>
! 118: # include <sys/stat.h>
! 119: # include <fcntl.h>
! 120: #endif
! 121:
! 122: #ifdef SUNOS5SIGS
! 123: # include <sys/siginfo.h>
! 124: # undef setjmp
! 125: # undef longjmp
! 126: # define setjmp(env) sigsetjmp(env, 1)
! 127: # define longjmp(env, val) siglongjmp(env, val)
! 128: # define jmp_buf sigjmp_buf
! 129: #endif
! 130:
! 131: #ifdef DJGPP
! 132: /* Apparently necessary for djgpp 2.01. May casuse problems with */
! 133: /* other versions. */
! 134: typedef long unsigned int caddr_t;
! 135: #endif
! 136:
! 137: #ifdef PCR
! 138: # include "il/PCR_IL.h"
! 139: # include "th/PCR_ThCtl.h"
! 140: # include "mm/PCR_MM.h"
! 141: #endif
! 142:
! 143: #if !defined(NO_EXECUTE_PERMISSION)
! 144: # define OPT_PROT_EXEC PROT_EXEC
! 145: #else
! 146: # define OPT_PROT_EXEC 0
! 147: #endif
! 148:
! 149: #if defined(SEARCH_FOR_DATA_START)
! 150: /* The following doesn't work if the GC is in a dynamic library. */
! 151: /* The I386 case can be handled without a search. The Alpha case */
! 152: /* used to be handled differently as well, but the rules changed */
! 153: /* for recent Linux versions. This seems to be the easiest way to */
! 154: /* cover all versions. */
! 155: ptr_t GC_data_start;
! 156:
! 157: extern char * GC_copyright[]; /* Any data symbol would do. */
! 158:
! 159: void GC_init_linux_data_start()
! 160: {
! 161: extern ptr_t GC_find_limit();
! 162:
! 163: GC_data_start = GC_find_limit((ptr_t)GC_copyright, FALSE);
! 164: }
! 165: #endif
! 166:
! 167: # ifdef OS2
! 168:
! 169: # include <stddef.h>
! 170:
! 171: # if !defined(__IBMC__) && !defined(__WATCOMC__) /* e.g. EMX */
! 172:
! 173: struct exe_hdr {
! 174: unsigned short magic_number;
! 175: unsigned short padding[29];
! 176: long new_exe_offset;
! 177: };
! 178:
! 179: #define E_MAGIC(x) (x).magic_number
! 180: #define EMAGIC 0x5A4D
! 181: #define E_LFANEW(x) (x).new_exe_offset
! 182:
! 183: struct e32_exe {
! 184: unsigned char magic_number[2];
! 185: unsigned char byte_order;
! 186: unsigned char word_order;
! 187: unsigned long exe_format_level;
! 188: unsigned short cpu;
! 189: unsigned short os;
! 190: unsigned long padding1[13];
! 191: unsigned long object_table_offset;
! 192: unsigned long object_count;
! 193: unsigned long padding2[31];
! 194: };
! 195:
! 196: #define E32_MAGIC1(x) (x).magic_number[0]
! 197: #define E32MAGIC1 'L'
! 198: #define E32_MAGIC2(x) (x).magic_number[1]
! 199: #define E32MAGIC2 'X'
! 200: #define E32_BORDER(x) (x).byte_order
! 201: #define E32LEBO 0
! 202: #define E32_WORDER(x) (x).word_order
! 203: #define E32LEWO 0
! 204: #define E32_CPU(x) (x).cpu
! 205: #define E32CPU286 1
! 206: #define E32_OBJTAB(x) (x).object_table_offset
! 207: #define E32_OBJCNT(x) (x).object_count
! 208:
! 209: struct o32_obj {
! 210: unsigned long size;
! 211: unsigned long base;
! 212: unsigned long flags;
! 213: unsigned long pagemap;
! 214: unsigned long mapsize;
! 215: unsigned long reserved;
! 216: };
! 217:
! 218: #define O32_FLAGS(x) (x).flags
! 219: #define OBJREAD 0x0001L
! 220: #define OBJWRITE 0x0002L
! 221: #define OBJINVALID 0x0080L
! 222: #define O32_SIZE(x) (x).size
! 223: #define O32_BASE(x) (x).base
! 224:
! 225: # else /* IBM's compiler */
! 226:
! 227: /* A kludge to get around what appears to be a header file bug */
! 228: # ifndef WORD
! 229: # define WORD unsigned short
! 230: # endif
! 231: # ifndef DWORD
! 232: # define DWORD unsigned long
! 233: # endif
! 234:
! 235: # define EXE386 1
! 236: # include <newexe.h>
! 237: # include <exe386.h>
! 238:
! 239: # endif /* __IBMC__ */
! 240:
! 241: # define INCL_DOSEXCEPTIONS
! 242: # define INCL_DOSPROCESS
! 243: # define INCL_DOSERRORS
! 244: # define INCL_DOSMODULEMGR
! 245: # define INCL_DOSMEMMGR
! 246: # include <os2.h>
! 247:
! 248:
! 249: /* Disable and enable signals during nontrivial allocations */
! 250:
! 251: void GC_disable_signals(void)
! 252: {
! 253: ULONG nest;
! 254:
! 255: DosEnterMustComplete(&nest);
! 256: if (nest != 1) ABORT("nested GC_disable_signals");
! 257: }
! 258:
! 259: void GC_enable_signals(void)
! 260: {
! 261: ULONG nest;
! 262:
! 263: DosExitMustComplete(&nest);
! 264: if (nest != 0) ABORT("GC_enable_signals");
! 265: }
! 266:
! 267:
! 268: # else
! 269:
! 270: # if !defined(PCR) && !defined(AMIGA) && !defined(MSWIN32) \
! 271: && !defined(MACOS) && !defined(DJGPP) && !defined(DOS4GW)
! 272:
! 273: # if defined(sigmask) && !defined(UTS4)
! 274: /* Use the traditional BSD interface */
! 275: # define SIGSET_T int
! 276: # define SIG_DEL(set, signal) (set) &= ~(sigmask(signal))
! 277: # define SIG_FILL(set) (set) = 0x7fffffff
! 278: /* Setting the leading bit appears to provoke a bug in some */
! 279: /* longjmp implementations. Most systems appear not to have */
! 280: /* a signal 32. */
! 281: # define SIGSETMASK(old, new) (old) = sigsetmask(new)
! 282: # else
! 283: /* Use POSIX/SYSV interface */
! 284: # define SIGSET_T sigset_t
! 285: # define SIG_DEL(set, signal) sigdelset(&(set), (signal))
! 286: # define SIG_FILL(set) sigfillset(&set)
! 287: # define SIGSETMASK(old, new) sigprocmask(SIG_SETMASK, &(new), &(old))
! 288: # endif
! 289:
! 290: static GC_bool mask_initialized = FALSE;
! 291:
! 292: static SIGSET_T new_mask;
! 293:
! 294: static SIGSET_T old_mask;
! 295:
! 296: static SIGSET_T dummy;
! 297:
! 298: #if defined(PRINTSTATS) && !defined(THREADS)
! 299: # define CHECK_SIGNALS
! 300: int GC_sig_disabled = 0;
! 301: #endif
! 302:
! 303: void GC_disable_signals()
! 304: {
! 305: if (!mask_initialized) {
! 306: SIG_FILL(new_mask);
! 307:
! 308: SIG_DEL(new_mask, SIGSEGV);
! 309: SIG_DEL(new_mask, SIGILL);
! 310: SIG_DEL(new_mask, SIGQUIT);
! 311: # ifdef SIGBUS
! 312: SIG_DEL(new_mask, SIGBUS);
! 313: # endif
! 314: # ifdef SIGIOT
! 315: SIG_DEL(new_mask, SIGIOT);
! 316: # endif
! 317: # ifdef SIGEMT
! 318: SIG_DEL(new_mask, SIGEMT);
! 319: # endif
! 320: # ifdef SIGTRAP
! 321: SIG_DEL(new_mask, SIGTRAP);
! 322: # endif
! 323: mask_initialized = TRUE;
! 324: }
! 325: # ifdef CHECK_SIGNALS
! 326: if (GC_sig_disabled != 0) ABORT("Nested disables");
! 327: GC_sig_disabled++;
! 328: # endif
! 329: SIGSETMASK(old_mask,new_mask);
! 330: if ( critical_when_signal )
! 331: inside_critical_section = 1;
! 332: else {
! 333: inside_critical_section = 0;
! 334: critical_when_signal = 1;
! 335: }
! 336: }
! 337:
! 338: void GC_enable_signals()
! 339: {
! 340: # ifdef CHECK_SIGNALS
! 341: if (GC_sig_disabled != 1) ABORT("Unmatched enable");
! 342: GC_sig_disabled--;
! 343: # endif
! 344: SIGSETMASK(dummy,old_mask);
! 345: if ( !inside_critical_section ) {
! 346: critical_when_signal = 0;
! 347: if ( ox_usr1_sent ) {
! 348: ox_usr1_sent = 0; ox_usr1_handler();
! 349: }
! 350: if ( ox_int_received ) {
! 351: ox_int_received = 0; int_handler();
! 352: }
! 353: } else
! 354: inside_critical_section = 0;
! 355: }
! 356:
! 357: # endif /* !PCR */
! 358:
! 359: # endif /*!OS/2 */
! 360:
! 361: /* Ivan Demakov: simplest way (to me) */
! 362: #ifdef DOS4GW
! 363: void GC_disable_signals() { }
! 364: void GC_enable_signals() { }
! 365: #endif
! 366:
! 367: /* Find the page size */
! 368: word GC_page_size;
! 369:
! 370: # ifdef MSWIN32
! 371: void GC_setpagesize()
! 372: {
! 373: SYSTEM_INFO sysinfo;
! 374:
! 375: GetSystemInfo(&sysinfo);
! 376: GC_page_size = sysinfo.dwPageSize;
! 377: }
! 378:
! 379: # else
! 380: # if defined(MPROTECT_VDB) || defined(PROC_VDB) || defined(USE_MMAP) \
! 381: || defined(USE_MUNMAP)
! 382: void GC_setpagesize()
! 383: {
! 384: GC_page_size = GETPAGESIZE();
! 385: }
! 386: # else
! 387: /* It's acceptable to fake it. */
! 388: void GC_setpagesize()
! 389: {
! 390: GC_page_size = HBLKSIZE;
! 391: }
! 392: # endif
! 393: # endif
! 394:
! 395: /*
! 396: * Find the base of the stack.
! 397: * Used only in single-threaded environment.
! 398: * With threads, GC_mark_roots needs to know how to do this.
! 399: * Called with allocator lock held.
! 400: */
! 401: # ifdef MSWIN32
! 402: # define is_writable(prot) ((prot) == PAGE_READWRITE \
! 403: || (prot) == PAGE_WRITECOPY \
! 404: || (prot) == PAGE_EXECUTE_READWRITE \
! 405: || (prot) == PAGE_EXECUTE_WRITECOPY)
! 406: /* Return the number of bytes that are writable starting at p. */
! 407: /* The pointer p is assumed to be page aligned. */
! 408: /* If base is not 0, *base becomes the beginning of the */
! 409: /* allocation region containing p. */
! 410: word GC_get_writable_length(ptr_t p, ptr_t *base)
! 411: {
! 412: MEMORY_BASIC_INFORMATION buf;
! 413: word result;
! 414: word protect;
! 415:
! 416: result = VirtualQuery(p, &buf, sizeof(buf));
! 417: if (result != sizeof(buf)) ABORT("Weird VirtualQuery result");
! 418: if (base != 0) *base = (ptr_t)(buf.AllocationBase);
! 419: protect = (buf.Protect & ~(PAGE_GUARD | PAGE_NOCACHE));
! 420: if (!is_writable(protect)) {
! 421: return(0);
! 422: }
! 423: if (buf.State != MEM_COMMIT) return(0);
! 424: return(buf.RegionSize);
! 425: }
! 426:
! 427: ptr_t GC_get_stack_base()
! 428: {
! 429: int dummy;
! 430: ptr_t sp = (ptr_t)(&dummy);
! 431: ptr_t trunc_sp = (ptr_t)((word)sp & ~(GC_page_size - 1));
! 432: word size = GC_get_writable_length(trunc_sp, 0);
! 433:
! 434: return(trunc_sp + size);
! 435: }
! 436:
! 437:
! 438: # else
! 439:
! 440: # ifdef OS2
! 441:
! 442: ptr_t GC_get_stack_base()
! 443: {
! 444: PTIB ptib;
! 445: PPIB ppib;
! 446:
! 447: if (DosGetInfoBlocks(&ptib, &ppib) != NO_ERROR) {
! 448: GC_err_printf0("DosGetInfoBlocks failed\n");
! 449: ABORT("DosGetInfoBlocks failed\n");
! 450: }
! 451: return((ptr_t)(ptib -> tib_pstacklimit));
! 452: }
! 453:
! 454: # else
! 455:
! 456: # ifdef AMIGA
! 457:
! 458: ptr_t GC_get_stack_base()
! 459: {
! 460: struct Process *proc = (struct Process*)SysBase->ThisTask;
! 461:
! 462: /* Reference: Amiga Guru Book Pages: 42,567,574 */
! 463: if (proc->pr_Task.tc_Node.ln_Type==NT_PROCESS
! 464: && proc->pr_CLI != NULL) {
! 465: /* first ULONG is StackSize */
! 466: /*longPtr = proc->pr_ReturnAddr;
! 467: size = longPtr[0];*/
! 468:
! 469: return (char *)proc->pr_ReturnAddr + sizeof(ULONG);
! 470: } else {
! 471: return (char *)proc->pr_Task.tc_SPUpper;
! 472: }
! 473: }
! 474:
! 475: #if 0 /* old version */
! 476: ptr_t GC_get_stack_base()
! 477: {
! 478: extern struct WBStartup *_WBenchMsg;
! 479: extern long __base;
! 480: extern long __stack;
! 481: struct Task *task;
! 482: struct Process *proc;
! 483: struct CommandLineInterface *cli;
! 484: long size;
! 485:
! 486: if ((task = FindTask(0)) == 0) {
! 487: GC_err_puts("Cannot find own task structure\n");
! 488: ABORT("task missing");
! 489: }
! 490: proc = (struct Process *)task;
! 491: cli = BADDR(proc->pr_CLI);
! 492:
! 493: if (_WBenchMsg != 0 || cli == 0) {
! 494: size = (char *)task->tc_SPUpper - (char *)task->tc_SPLower;
! 495: } else {
! 496: size = cli->cli_DefaultStack * 4;
! 497: }
! 498: return (ptr_t)(__base + GC_max(size, __stack));
! 499: }
! 500: #endif /* 0 */
! 501:
! 502: # else /* !AMIGA, !OS2, ... */
! 503:
! 504: # ifdef NEED_FIND_LIMIT
! 505: /* Some tools to implement HEURISTIC2 */
! 506: # define MIN_PAGE_SIZE 256 /* Smallest conceivable page size, bytes */
! 507: /* static */ jmp_buf GC_jmp_buf;
! 508:
! 509: /*ARGSUSED*/
! 510: void GC_fault_handler(sig)
! 511: int sig;
! 512: {
! 513: longjmp(GC_jmp_buf, 1);
! 514: }
! 515:
! 516: # ifdef __STDC__
! 517: typedef void (*handler)(int);
! 518: # else
! 519: typedef void (*handler)();
! 520: # endif
! 521:
! 522: # if defined(SUNOS5SIGS) || defined(IRIX5) || defined(OSF1)
! 523: static struct sigaction old_segv_act;
! 524: # if defined(_sigargs) || defined(HPUX) /* !Irix6.x */
! 525: static struct sigaction old_bus_act;
! 526: # endif
! 527: # else
! 528: static handler old_segv_handler, old_bus_handler;
! 529: # endif
! 530:
! 531: void GC_setup_temporary_fault_handler()
! 532: {
! 533: # if defined(SUNOS5SIGS) || defined(IRIX5) || defined(OSF1)
! 534: struct sigaction act;
! 535:
! 536: act.sa_handler = GC_fault_handler;
! 537: act.sa_flags = SA_RESTART | SA_NODEFER;
! 538: /* The presence of SA_NODEFER represents yet another gross */
! 539: /* hack. Under Solaris 2.3, siglongjmp doesn't appear to */
! 540: /* interact correctly with -lthread. We hide the confusion */
! 541: /* by making sure that signal handling doesn't affect the */
! 542: /* signal mask. */
! 543:
! 544: (void) sigemptyset(&act.sa_mask);
! 545: # ifdef IRIX_THREADS
! 546: /* Older versions have a bug related to retrieving and */
! 547: /* and setting a handler at the same time. */
! 548: (void) sigaction(SIGSEGV, 0, &old_segv_act);
! 549: (void) sigaction(SIGSEGV, &act, 0);
! 550: # else
! 551: (void) sigaction(SIGSEGV, &act, &old_segv_act);
! 552: # if defined(IRIX5) && defined(_sigargs) /* Irix 5.x, not 6.x */ \
! 553: || defined(HPUX)
! 554: /* Under Irix 5.x or HP/UX, we may get SIGBUS. */
! 555: /* Pthreads doesn't exist under Irix 5.x, so we */
! 556: /* don't have to worry in the threads case. */
! 557: (void) sigaction(SIGBUS, &act, &old_bus_act);
! 558: # endif
! 559: # endif /* IRIX_THREADS */
! 560: # else
! 561: old_segv_handler = signal(SIGSEGV, GC_fault_handler);
! 562: # ifdef SIGBUS
! 563: old_bus_handler = signal(SIGBUS, GC_fault_handler);
! 564: # endif
! 565: # endif
! 566: }
! 567:
! 568: void GC_reset_fault_handler()
! 569: {
! 570: # if defined(SUNOS5SIGS) || defined(IRIX5) || defined(OSF1)
! 571: (void) sigaction(SIGSEGV, &old_segv_act, 0);
! 572: # if defined(IRIX5) && defined(_sigargs) /* Irix 5.x, not 6.x */ \
! 573: || defined(HPUX)
! 574: (void) sigaction(SIGBUS, &old_bus_act, 0);
! 575: # endif
! 576: # else
! 577: (void) signal(SIGSEGV, old_segv_handler);
! 578: # ifdef SIGBUS
! 579: (void) signal(SIGBUS, old_bus_handler);
! 580: # endif
! 581: # endif
! 582: }
! 583:
! 584: /* Return the first nonaddressible location > p (up) or */
! 585: /* the smallest location q s.t. [q,p] is addressible (!up). */
! 586: ptr_t GC_find_limit(p, up)
! 587: ptr_t p;
! 588: GC_bool up;
! 589: {
! 590: static VOLATILE ptr_t result;
! 591: /* Needs to be static, since otherwise it may not be */
! 592: /* preserved across the longjmp. Can safely be */
! 593: /* static since it's only called once, with the */
! 594: /* allocation lock held. */
! 595:
! 596:
! 597: GC_setup_temporary_fault_handler();
! 598: if (setjmp(GC_jmp_buf) == 0) {
! 599: result = (ptr_t)(((word)(p))
! 600: & ~(MIN_PAGE_SIZE-1));
! 601: for (;;) {
! 602: if (up) {
! 603: result += MIN_PAGE_SIZE;
! 604: } else {
! 605: result -= MIN_PAGE_SIZE;
! 606: }
! 607: GC_noop1((word)(*result));
! 608: }
! 609: }
! 610: GC_reset_fault_handler();
! 611: if (!up) {
! 612: result += MIN_PAGE_SIZE;
! 613: }
! 614: return(result);
! 615: }
! 616: # endif
! 617:
! 618: #ifdef LINUX_STACKBOTTOM
! 619:
! 620: #include <sys/types.h>
! 621: #include <sys/stat.h>
! 622: #include <fcntl.h>
! 623:
! 624: # define STAT_SKIP 27 /* Number of fields preceding startstack */
! 625: /* field in /proc/self/stat */
! 626:
! 627: ptr_t GC_linux_stack_base(void)
! 628: {
! 629: /* We read the stack base value from /proc/self/stat. We do this */
! 630: /* using direct I/O system calls in order to avoid calling malloc */
! 631: /* in case REDIRECT_MALLOC is defined. */
! 632: # define STAT_BUF_SIZE 4096
! 633: # ifdef USE_LD_WRAP
! 634: # define STAT_READ __real_read
! 635: # else
! 636: # define STAT_READ read
! 637: # endif
! 638: char stat_buf[STAT_BUF_SIZE];
! 639: int f;
! 640: char c;
! 641: word result = 0;
! 642: size_t i, buf_offset = 0;
! 643:
! 644: f = open("/proc/self/stat", O_RDONLY);
! 645: if (f < 0 || STAT_READ(f, stat_buf, STAT_BUF_SIZE) < 2 * STAT_SKIP) {
! 646: ABORT("Couldn't read /proc/self/stat");
! 647: }
! 648: c = stat_buf[buf_offset++];
! 649: /* Skip the required number of fields. This number is hopefully */
! 650: /* constant across all Linux implementations. */
! 651: for (i = 0; i < STAT_SKIP; ++i) {
! 652: while (isspace(c)) c = stat_buf[buf_offset++];
! 653: while (!isspace(c)) c = stat_buf[buf_offset++];
! 654: }
! 655: while (isspace(c)) c = stat_buf[buf_offset++];
! 656: while (isdigit(c)) {
! 657: result *= 10;
! 658: result += c - '0';
! 659: c = stat_buf[buf_offset++];
! 660: }
! 661: close(f);
! 662: if (result < 0x10000000) ABORT("Absurd stack bottom value");
! 663: return (ptr_t)result;
! 664: }
! 665:
! 666: #endif /* LINUX_STACKBOTTOM */
! 667:
! 668: ptr_t GC_get_stack_base()
! 669: {
! 670: word dummy;
! 671: ptr_t result;
! 672:
! 673: # define STACKBOTTOM_ALIGNMENT_M1 ((word)STACK_GRAN - 1)
! 674:
! 675: # ifdef STACKBOTTOM
! 676: return(STACKBOTTOM);
! 677: # else
! 678: # ifdef HEURISTIC1
! 679: # ifdef STACK_GROWS_DOWN
! 680: result = (ptr_t)((((word)(&dummy))
! 681: + STACKBOTTOM_ALIGNMENT_M1)
! 682: & ~STACKBOTTOM_ALIGNMENT_M1);
! 683: # else
! 684: result = (ptr_t)(((word)(&dummy))
! 685: & ~STACKBOTTOM_ALIGNMENT_M1);
! 686: # endif
! 687: # endif /* HEURISTIC1 */
! 688: # ifdef LINUX_STACKBOTTOM
! 689: result = GC_linux_stack_base();
! 690: # endif
! 691: # ifdef HEURISTIC2
! 692: # ifdef STACK_GROWS_DOWN
! 693: result = GC_find_limit((ptr_t)(&dummy), TRUE);
! 694: # ifdef HEURISTIC2_LIMIT
! 695: if (result > HEURISTIC2_LIMIT
! 696: && (ptr_t)(&dummy) < HEURISTIC2_LIMIT) {
! 697: result = HEURISTIC2_LIMIT;
! 698: }
! 699: # endif
! 700: # else
! 701: result = GC_find_limit((ptr_t)(&dummy), FALSE);
! 702: # ifdef HEURISTIC2_LIMIT
! 703: if (result < HEURISTIC2_LIMIT
! 704: && (ptr_t)(&dummy) > HEURISTIC2_LIMIT) {
! 705: result = HEURISTIC2_LIMIT;
! 706: }
! 707: # endif
! 708: # endif
! 709:
! 710: # endif /* HEURISTIC2 */
! 711: # ifdef STACK_GROWS_DOWN
! 712: if (result == 0) result = (ptr_t)(signed_word)(-sizeof(ptr_t));
! 713: # endif
! 714: return(result);
! 715: # endif /* STACKBOTTOM */
! 716: }
! 717:
! 718: # endif /* ! AMIGA */
! 719: # endif /* ! OS2 */
! 720: # endif /* ! MSWIN32 */
! 721:
! 722: /*
! 723: * Register static data segment(s) as roots.
! 724: * If more data segments are added later then they need to be registered
! 725: * add that point (as we do with SunOS dynamic loading),
! 726: * or GC_mark_roots needs to check for them (as we do with PCR).
! 727: * Called with allocator lock held.
! 728: */
! 729:
! 730: # ifdef OS2
! 731:
! 732: void GC_register_data_segments()
! 733: {
! 734: PTIB ptib;
! 735: PPIB ppib;
! 736: HMODULE module_handle;
! 737: # define PBUFSIZ 512
! 738: UCHAR path[PBUFSIZ];
! 739: FILE * myexefile;
! 740: struct exe_hdr hdrdos; /* MSDOS header. */
! 741: struct e32_exe hdr386; /* Real header for my executable */
! 742: struct o32_obj seg; /* Currrent segment */
! 743: int nsegs;
! 744:
! 745:
! 746: if (DosGetInfoBlocks(&ptib, &ppib) != NO_ERROR) {
! 747: GC_err_printf0("DosGetInfoBlocks failed\n");
! 748: ABORT("DosGetInfoBlocks failed\n");
! 749: }
! 750: module_handle = ppib -> pib_hmte;
! 751: if (DosQueryModuleName(module_handle, PBUFSIZ, path) != NO_ERROR) {
! 752: GC_err_printf0("DosQueryModuleName failed\n");
! 753: ABORT("DosGetInfoBlocks failed\n");
! 754: }
! 755: myexefile = fopen(path, "rb");
! 756: if (myexefile == 0) {
! 757: GC_err_puts("Couldn't open executable ");
! 758: GC_err_puts(path); GC_err_puts("\n");
! 759: ABORT("Failed to open executable\n");
! 760: }
! 761: if (fread((char *)(&hdrdos), 1, sizeof hdrdos, myexefile) < sizeof hdrdos) {
! 762: GC_err_puts("Couldn't read MSDOS header from ");
! 763: GC_err_puts(path); GC_err_puts("\n");
! 764: ABORT("Couldn't read MSDOS header");
! 765: }
! 766: if (E_MAGIC(hdrdos) != EMAGIC) {
! 767: GC_err_puts("Executable has wrong DOS magic number: ");
! 768: GC_err_puts(path); GC_err_puts("\n");
! 769: ABORT("Bad DOS magic number");
! 770: }
! 771: if (fseek(myexefile, E_LFANEW(hdrdos), SEEK_SET) != 0) {
! 772: GC_err_puts("Seek to new header failed in ");
! 773: GC_err_puts(path); GC_err_puts("\n");
! 774: ABORT("Bad DOS magic number");
! 775: }
! 776: if (fread((char *)(&hdr386), 1, sizeof hdr386, myexefile) < sizeof hdr386) {
! 777: GC_err_puts("Couldn't read MSDOS header from ");
! 778: GC_err_puts(path); GC_err_puts("\n");
! 779: ABORT("Couldn't read OS/2 header");
! 780: }
! 781: if (E32_MAGIC1(hdr386) != E32MAGIC1 || E32_MAGIC2(hdr386) != E32MAGIC2) {
! 782: GC_err_puts("Executable has wrong OS/2 magic number:");
! 783: GC_err_puts(path); GC_err_puts("\n");
! 784: ABORT("Bad OS/2 magic number");
! 785: }
! 786: if ( E32_BORDER(hdr386) != E32LEBO || E32_WORDER(hdr386) != E32LEWO) {
! 787: GC_err_puts("Executable %s has wrong byte order: ");
! 788: GC_err_puts(path); GC_err_puts("\n");
! 789: ABORT("Bad byte order");
! 790: }
! 791: if ( E32_CPU(hdr386) == E32CPU286) {
! 792: GC_err_puts("GC can't handle 80286 executables: ");
! 793: GC_err_puts(path); GC_err_puts("\n");
! 794: EXIT();
! 795: }
! 796: if (fseek(myexefile, E_LFANEW(hdrdos) + E32_OBJTAB(hdr386),
! 797: SEEK_SET) != 0) {
! 798: GC_err_puts("Seek to object table failed: ");
! 799: GC_err_puts(path); GC_err_puts("\n");
! 800: ABORT("Seek to object table failed");
! 801: }
! 802: for (nsegs = E32_OBJCNT(hdr386); nsegs > 0; nsegs--) {
! 803: int flags;
! 804: if (fread((char *)(&seg), 1, sizeof seg, myexefile) < sizeof seg) {
! 805: GC_err_puts("Couldn't read obj table entry from ");
! 806: GC_err_puts(path); GC_err_puts("\n");
! 807: ABORT("Couldn't read obj table entry");
! 808: }
! 809: flags = O32_FLAGS(seg);
! 810: if (!(flags & OBJWRITE)) continue;
! 811: if (!(flags & OBJREAD)) continue;
! 812: if (flags & OBJINVALID) {
! 813: GC_err_printf0("Object with invalid pages?\n");
! 814: continue;
! 815: }
! 816: GC_add_roots_inner(O32_BASE(seg), O32_BASE(seg)+O32_SIZE(seg), FALSE);
! 817: }
! 818: }
! 819:
! 820: # else
! 821:
! 822: # ifdef MSWIN32
! 823: /* Unfortunately, we have to handle win32s very differently from NT, */
! 824: /* Since VirtualQuery has very different semantics. In particular, */
! 825: /* under win32s a VirtualQuery call on an unmapped page returns an */
! 826: /* invalid result. Under GC_register_data_segments is a noop and */
! 827: /* all real work is done by GC_register_dynamic_libraries. Under */
! 828: /* win32s, we cannot find the data segments associated with dll's. */
! 829: /* We rgister the main data segment here. */
! 830: GC_bool GC_win32s = FALSE; /* We're running under win32s. */
! 831:
! 832: GC_bool GC_is_win32s()
! 833: {
! 834: DWORD v = GetVersion();
! 835:
! 836: /* Check that this is not NT, and Windows major version <= 3 */
! 837: return ((v & 0x80000000) && (v & 0xff) <= 3);
! 838: }
! 839:
! 840: void GC_init_win32()
! 841: {
! 842: GC_win32s = GC_is_win32s();
! 843: }
! 844:
! 845: /* Return the smallest address a such that VirtualQuery */
! 846: /* returns correct results for all addresses between a and start. */
! 847: /* Assumes VirtualQuery returns correct information for start. */
! 848: ptr_t GC_least_described_address(ptr_t start)
! 849: {
! 850: MEMORY_BASIC_INFORMATION buf;
! 851: SYSTEM_INFO sysinfo;
! 852: DWORD result;
! 853: LPVOID limit;
! 854: ptr_t p;
! 855: LPVOID q;
! 856:
! 857: GetSystemInfo(&sysinfo);
! 858: limit = sysinfo.lpMinimumApplicationAddress;
! 859: p = (ptr_t)((word)start & ~(GC_page_size - 1));
! 860: for (;;) {
! 861: q = (LPVOID)(p - GC_page_size);
! 862: if ((ptr_t)q > (ptr_t)p /* underflow */ || q < limit) break;
! 863: result = VirtualQuery(q, &buf, sizeof(buf));
! 864: if (result != sizeof(buf) || buf.AllocationBase == 0) break;
! 865: p = (ptr_t)(buf.AllocationBase);
! 866: }
! 867: return(p);
! 868: }
! 869:
! 870: /* Is p the start of either the malloc heap, or of one of our */
! 871: /* heap sections? */
! 872: GC_bool GC_is_heap_base (ptr_t p)
! 873: {
! 874:
! 875: register unsigned i;
! 876:
! 877: # ifndef REDIRECT_MALLOC
! 878: static ptr_t malloc_heap_pointer = 0;
! 879:
! 880: if (0 == malloc_heap_pointer) {
! 881: MEMORY_BASIC_INFORMATION buf;
! 882: register DWORD result = VirtualQuery(malloc(1), &buf, sizeof(buf));
! 883:
! 884: if (result != sizeof(buf)) {
! 885: ABORT("Weird VirtualQuery result");
! 886: }
! 887: malloc_heap_pointer = (ptr_t)(buf.AllocationBase);
! 888: }
! 889: if (p == malloc_heap_pointer) return(TRUE);
! 890: # endif
! 891: for (i = 0; i < GC_n_heap_bases; i++) {
! 892: if (GC_heap_bases[i] == p) return(TRUE);
! 893: }
! 894: return(FALSE);
! 895: }
! 896:
! 897: void GC_register_root_section(ptr_t static_root)
! 898: {
! 899: MEMORY_BASIC_INFORMATION buf;
! 900: SYSTEM_INFO sysinfo;
! 901: DWORD result;
! 902: DWORD protect;
! 903: LPVOID p;
! 904: char * base;
! 905: char * limit, * new_limit;
! 906:
! 907: if (!GC_win32s) return;
! 908: p = base = limit = GC_least_described_address(static_root);
! 909: GetSystemInfo(&sysinfo);
! 910: while (p < sysinfo.lpMaximumApplicationAddress) {
! 911: result = VirtualQuery(p, &buf, sizeof(buf));
! 912: if (result != sizeof(buf) || buf.AllocationBase == 0
! 913: || GC_is_heap_base(buf.AllocationBase)) break;
! 914: new_limit = (char *)p + buf.RegionSize;
! 915: protect = buf.Protect;
! 916: if (buf.State == MEM_COMMIT
! 917: && is_writable(protect)) {
! 918: if ((char *)p == limit) {
! 919: limit = new_limit;
! 920: } else {
! 921: if (base != limit) GC_add_roots_inner(base, limit, FALSE);
! 922: base = p;
! 923: limit = new_limit;
! 924: }
! 925: }
! 926: if (p > (LPVOID)new_limit /* overflow */) break;
! 927: p = (LPVOID)new_limit;
! 928: }
! 929: if (base != limit) GC_add_roots_inner(base, limit, FALSE);
! 930: }
! 931:
! 932: void GC_register_data_segments()
! 933: {
! 934: static char dummy;
! 935:
! 936: GC_register_root_section((ptr_t)(&dummy));
! 937: }
! 938: # else
! 939: # ifdef AMIGA
! 940:
! 941: void GC_register_data_segments()
! 942: {
! 943: struct Process *proc;
! 944: struct CommandLineInterface *cli;
! 945: BPTR myseglist;
! 946: ULONG *data;
! 947:
! 948: int num;
! 949:
! 950:
! 951: # ifdef __GNUC__
! 952: ULONG dataSegSize;
! 953: GC_bool found_segment = FALSE;
! 954: extern char __data_size[];
! 955:
! 956: dataSegSize=__data_size+8;
! 957: /* Can`t find the Location of __data_size, because
! 958: it`s possible that is it, inside the segment. */
! 959:
! 960: # endif
! 961:
! 962: proc= (struct Process*)SysBase->ThisTask;
! 963:
! 964: /* Reference: Amiga Guru Book Pages: 538ff,565,573
! 965: and XOper.asm */
! 966: if (proc->pr_Task.tc_Node.ln_Type==NT_PROCESS) {
! 967: if (proc->pr_CLI == NULL) {
! 968: myseglist = proc->pr_SegList;
! 969: } else {
! 970: /* ProcLoaded 'Loaded as a command: '*/
! 971: cli = BADDR(proc->pr_CLI);
! 972: myseglist = cli->cli_Module;
! 973: }
! 974: } else {
! 975: ABORT("Not a Process.");
! 976: }
! 977:
! 978: if (myseglist == NULL) {
! 979: ABORT("Arrrgh.. can't find segments, aborting");
! 980: }
! 981:
! 982: /* xoper hunks Shell Process */
! 983:
! 984: num=0;
! 985: for (data = (ULONG *)BADDR(myseglist); data != NULL;
! 986: data = (ULONG *)BADDR(data[0])) {
! 987: if (((ULONG) GC_register_data_segments < (ULONG) &data[1]) ||
! 988: ((ULONG) GC_register_data_segments > (ULONG) &data[1] + data[-1])) {
! 989: # ifdef __GNUC__
! 990: if (dataSegSize == data[-1]) {
! 991: found_segment = TRUE;
! 992: }
! 993: # endif
! 994: GC_add_roots_inner((char *)&data[1],
! 995: ((char *)&data[1]) + data[-1], FALSE);
! 996: }
! 997: ++num;
! 998: } /* for */
! 999: # ifdef __GNUC__
! 1000: if (!found_segment) {
! 1001: ABORT("Can`t find correct Segments.\nSolution: Use an newer version of ixemul.library");
! 1002: }
! 1003: # endif
! 1004: }
! 1005:
! 1006: #if 0 /* old version */
! 1007: void GC_register_data_segments()
! 1008: {
! 1009: extern struct WBStartup *_WBenchMsg;
! 1010: struct Process *proc;
! 1011: struct CommandLineInterface *cli;
! 1012: BPTR myseglist;
! 1013: ULONG *data;
! 1014:
! 1015: if ( _WBenchMsg != 0 ) {
! 1016: if ((myseglist = _WBenchMsg->sm_Segment) == 0) {
! 1017: GC_err_puts("No seglist from workbench\n");
! 1018: return;
! 1019: }
! 1020: } else {
! 1021: if ((proc = (struct Process *)FindTask(0)) == 0) {
! 1022: GC_err_puts("Cannot find process structure\n");
! 1023: return;
! 1024: }
! 1025: if ((cli = BADDR(proc->pr_CLI)) == 0) {
! 1026: GC_err_puts("No CLI\n");
! 1027: return;
! 1028: }
! 1029: if ((myseglist = cli->cli_Module) == 0) {
! 1030: GC_err_puts("No seglist from CLI\n");
! 1031: return;
! 1032: }
! 1033: }
! 1034:
! 1035: for (data = (ULONG *)BADDR(myseglist); data != 0;
! 1036: data = (ULONG *)BADDR(data[0])) {
! 1037: # ifdef AMIGA_SKIP_SEG
! 1038: if (((ULONG) GC_register_data_segments < (ULONG) &data[1]) ||
! 1039: ((ULONG) GC_register_data_segments > (ULONG) &data[1] + data[-1])) {
! 1040: # else
! 1041: {
! 1042: # endif /* AMIGA_SKIP_SEG */
! 1043: GC_add_roots_inner((char *)&data[1],
! 1044: ((char *)&data[1]) + data[-1], FALSE);
! 1045: }
! 1046: }
! 1047: }
! 1048: #endif /* old version */
! 1049:
! 1050:
! 1051: # else
! 1052:
! 1053: # if (defined(SVR4) || defined(AUX) || defined(DGUX)) && !defined(PCR)
! 1054: char * GC_SysVGetDataStart(max_page_size, etext_addr)
! 1055: int max_page_size;
! 1056: int * etext_addr;
! 1057: {
! 1058: word text_end = ((word)(etext_addr) + sizeof(word) - 1)
! 1059: & ~(sizeof(word) - 1);
! 1060: /* etext rounded to word boundary */
! 1061: word next_page = ((text_end + (word)max_page_size - 1)
! 1062: & ~((word)max_page_size - 1));
! 1063: word page_offset = (text_end & ((word)max_page_size - 1));
! 1064: VOLATILE char * result = (char *)(next_page + page_offset);
! 1065: /* Note that this isnt equivalent to just adding */
! 1066: /* max_page_size to &etext if &etext is at a page boundary */
! 1067:
! 1068: GC_setup_temporary_fault_handler();
! 1069: if (setjmp(GC_jmp_buf) == 0) {
! 1070: /* Try writing to the address. */
! 1071: *result = *result;
! 1072: GC_reset_fault_handler();
! 1073: } else {
! 1074: GC_reset_fault_handler();
! 1075: /* We got here via a longjmp. The address is not readable. */
! 1076: /* This is known to happen under Solaris 2.4 + gcc, which place */
! 1077: /* string constants in the text segment, but after etext. */
! 1078: /* Use plan B. Note that we now know there is a gap between */
! 1079: /* text and data segments, so plan A bought us something. */
! 1080: result = (char *)GC_find_limit((ptr_t)(DATAEND) - MIN_PAGE_SIZE, FALSE);
! 1081: }
! 1082: return((char *)result);
! 1083: }
! 1084: # endif
! 1085:
! 1086:
! 1087: void GC_register_data_segments()
! 1088: {
! 1089: # if !defined(PCR) && !defined(SRC_M3) && !defined(NEXT) && !defined(MACOS) \
! 1090: && !defined(MACOSX)
! 1091: # if defined(REDIRECT_MALLOC) && defined(SOLARIS_THREADS)
! 1092: /* As of Solaris 2.3, the Solaris threads implementation */
! 1093: /* allocates the data structure for the initial thread with */
! 1094: /* sbrk at process startup. It needs to be scanned, so that */
! 1095: /* we don't lose some malloc allocated data structures */
! 1096: /* hanging from it. We're on thin ice here ... */
! 1097: extern caddr_t sbrk();
! 1098:
! 1099: GC_add_roots_inner(DATASTART, (char *)sbrk(0), FALSE);
! 1100: # else
! 1101: GC_add_roots_inner(DATASTART, (char *)(DATAEND), FALSE);
! 1102: # endif
! 1103: # endif
! 1104: # if !defined(PCR) && (defined(NEXT) || defined(MACOSX))
! 1105: GC_add_roots_inner(DATASTART, (char *) get_end(), FALSE);
! 1106: # endif
! 1107: # if defined(MACOS)
! 1108: {
! 1109: # if defined(THINK_C)
! 1110: extern void* GC_MacGetDataStart(void);
! 1111: /* globals begin above stack and end at a5. */
! 1112: GC_add_roots_inner((ptr_t)GC_MacGetDataStart(),
! 1113: (ptr_t)LMGetCurrentA5(), FALSE);
! 1114: # else
! 1115: # if defined(__MWERKS__)
! 1116: # if !__POWERPC__
! 1117: extern void* GC_MacGetDataStart(void);
! 1118: /* MATTHEW: Function to handle Far Globals (CW Pro 3) */
! 1119: # if __option(far_data)
! 1120: extern void* GC_MacGetDataEnd(void);
! 1121: # endif
! 1122: /* globals begin above stack and end at a5. */
! 1123: GC_add_roots_inner((ptr_t)GC_MacGetDataStart(),
! 1124: (ptr_t)LMGetCurrentA5(), FALSE);
! 1125: /* MATTHEW: Handle Far Globals */
! 1126: # if __option(far_data)
! 1127: /* Far globals follow he QD globals: */
! 1128: GC_add_roots_inner((ptr_t)LMGetCurrentA5(),
! 1129: (ptr_t)GC_MacGetDataEnd(), FALSE);
! 1130: # endif
! 1131: # else
! 1132: extern char __data_start__[], __data_end__[];
! 1133: GC_add_roots_inner((ptr_t)&__data_start__,
! 1134: (ptr_t)&__data_end__, FALSE);
! 1135: # endif /* __POWERPC__ */
! 1136: # endif /* __MWERKS__ */
! 1137: # endif /* !THINK_C */
! 1138: }
! 1139: # endif /* MACOS */
! 1140:
! 1141: /* Dynamic libraries are added at every collection, since they may */
! 1142: /* change. */
! 1143: }
! 1144:
! 1145: # endif /* ! AMIGA */
! 1146: # endif /* ! MSWIN32 */
! 1147: # endif /* ! OS2 */
! 1148:
! 1149: /*
! 1150: * Auxiliary routines for obtaining memory from OS.
! 1151: */
! 1152:
! 1153: # if !defined(OS2) && !defined(PCR) && !defined(AMIGA) \
! 1154: && !defined(MSWIN32) && !defined(MACOS) && !defined(DOS4GW)
! 1155:
! 1156: # ifdef SUNOS4
! 1157: extern caddr_t sbrk();
! 1158: # endif
! 1159: # ifdef __STDC__
! 1160: # define SBRK_ARG_T ptrdiff_t
! 1161: # else
! 1162: # define SBRK_ARG_T int
! 1163: # endif
! 1164:
! 1165: # ifdef RS6000
! 1166: /* The compiler seems to generate speculative reads one past the end of */
! 1167: /* an allocated object. Hence we need to make sure that the page */
! 1168: /* following the last heap page is also mapped. */
! 1169: ptr_t GC_unix_get_mem(bytes)
! 1170: word bytes;
! 1171: {
! 1172: caddr_t cur_brk = (caddr_t)sbrk(0);
! 1173: caddr_t result;
! 1174: SBRK_ARG_T lsbs = (word)cur_brk & (GC_page_size-1);
! 1175: static caddr_t my_brk_val = 0;
! 1176:
! 1177: if ((SBRK_ARG_T)bytes < 0) return(0); /* too big */
! 1178: if (lsbs != 0) {
! 1179: if((caddr_t)(sbrk(GC_page_size - lsbs)) == (caddr_t)(-1)) return(0);
! 1180: }
! 1181: if (cur_brk == my_brk_val) {
! 1182: /* Use the extra block we allocated last time. */
! 1183: result = (ptr_t)sbrk((SBRK_ARG_T)bytes);
! 1184: if (result == (caddr_t)(-1)) return(0);
! 1185: result -= GC_page_size;
! 1186: } else {
! 1187: result = (ptr_t)sbrk(GC_page_size + (SBRK_ARG_T)bytes);
! 1188: if (result == (caddr_t)(-1)) return(0);
! 1189: }
! 1190: my_brk_val = result + bytes + GC_page_size; /* Always page aligned */
! 1191: return((ptr_t)result);
! 1192: }
! 1193:
! 1194: #else /* Not RS6000 */
! 1195:
! 1196: #if defined(USE_MMAP)
! 1197: /* Tested only under IRIX5 and Solaris 2 */
! 1198:
! 1199: #ifdef USE_MMAP_FIXED
! 1200: # define GC_MMAP_FLAGS MAP_FIXED | MAP_PRIVATE
! 1201: /* Seems to yield better performance on Solaris 2, but can */
! 1202: /* be unreliable if something is already mapped at the address. */
! 1203: #else
! 1204: # define GC_MMAP_FLAGS MAP_PRIVATE
! 1205: #endif
! 1206:
! 1207: ptr_t GC_unix_get_mem(bytes)
! 1208: word bytes;
! 1209: {
! 1210: static GC_bool initialized = FALSE;
! 1211: static int fd;
! 1212: void *result;
! 1213: static ptr_t last_addr = HEAP_START;
! 1214:
! 1215: if (!initialized) {
! 1216: fd = open("/dev/zero", O_RDONLY);
! 1217: initialized = TRUE;
! 1218: }
! 1219: if (bytes & (GC_page_size -1)) ABORT("Bad GET_MEM arg");
! 1220: result = mmap(last_addr, bytes, PROT_READ | PROT_WRITE | OPT_PROT_EXEC,
! 1221: GC_MMAP_FLAGS, fd, 0/* offset */);
! 1222: if (result == MAP_FAILED) return(0);
! 1223: last_addr = (ptr_t)result + bytes + GC_page_size - 1;
! 1224: last_addr = (ptr_t)((word)last_addr & ~(GC_page_size - 1));
! 1225: return((ptr_t)result);
! 1226: }
! 1227:
! 1228: #else /* Not RS6000, not USE_MMAP */
! 1229: ptr_t GC_unix_get_mem(bytes)
! 1230: word bytes;
! 1231: {
! 1232: ptr_t result;
! 1233: # ifdef IRIX5
! 1234: /* Bare sbrk isn't thread safe. Play by malloc rules. */
! 1235: /* The equivalent may be needed on other systems as well. */
! 1236: __LOCK_MALLOC();
! 1237: # endif
! 1238: {
! 1239: ptr_t cur_brk = (ptr_t)sbrk(0);
! 1240: SBRK_ARG_T lsbs = (word)cur_brk & (GC_page_size-1);
! 1241:
! 1242: if ((SBRK_ARG_T)bytes < 0) return(0); /* too big */
! 1243: if (lsbs != 0) {
! 1244: if((ptr_t)sbrk(GC_page_size - lsbs) == (ptr_t)(-1)) return(0);
! 1245: }
! 1246: result = (ptr_t)sbrk((SBRK_ARG_T)bytes);
! 1247: if (result == (ptr_t)(-1)) result = 0;
! 1248: }
! 1249: # ifdef IRIX5
! 1250: __UNLOCK_MALLOC();
! 1251: # endif
! 1252: return(result);
! 1253: }
! 1254:
! 1255: #endif /* Not USE_MMAP */
! 1256: #endif /* Not RS6000 */
! 1257:
! 1258: # endif /* UN*X */
! 1259:
! 1260: # ifdef OS2
! 1261:
! 1262: void * os2_alloc(size_t bytes)
! 1263: {
! 1264: void * result;
! 1265:
! 1266: if (DosAllocMem(&result, bytes, PAG_EXECUTE | PAG_READ |
! 1267: PAG_WRITE | PAG_COMMIT)
! 1268: != NO_ERROR) {
! 1269: return(0);
! 1270: }
! 1271: if (result == 0) return(os2_alloc(bytes));
! 1272: return(result);
! 1273: }
! 1274:
! 1275: # endif /* OS2 */
! 1276:
! 1277:
! 1278: # ifdef MSWIN32
! 1279: word GC_n_heap_bases = 0;
! 1280:
! 1281: ptr_t GC_win32_get_mem(bytes)
! 1282: word bytes;
! 1283: {
! 1284: ptr_t result;
! 1285:
! 1286: if (GC_win32s) {
! 1287: /* VirtualAlloc doesn't like PAGE_EXECUTE_READWRITE. */
! 1288: /* There are also unconfirmed rumors of other */
! 1289: /* problems, so we dodge the issue. */
! 1290: result = (ptr_t) GlobalAlloc(0, bytes + HBLKSIZE);
! 1291: result = (ptr_t)(((word)result + HBLKSIZE) & ~(HBLKSIZE-1));
! 1292: } else {
! 1293: result = (ptr_t) VirtualAlloc(NULL, bytes,
! 1294: MEM_COMMIT | MEM_RESERVE,
! 1295: PAGE_EXECUTE_READWRITE);
! 1296: }
! 1297: if (HBLKDISPL(result) != 0) ABORT("Bad VirtualAlloc result");
! 1298: /* If I read the documentation correctly, this can */
! 1299: /* only happen if HBLKSIZE > 64k or not a power of 2. */
! 1300: if (GC_n_heap_bases >= MAX_HEAP_SECTS) ABORT("Too many heap sections");
! 1301: GC_heap_bases[GC_n_heap_bases++] = result;
! 1302: return(result);
! 1303: }
! 1304:
! 1305: void GC_win32_free_heap ()
! 1306: {
! 1307: if (GC_win32s) {
! 1308: while (GC_n_heap_bases > 0) {
! 1309: GlobalFree (GC_heap_bases[--GC_n_heap_bases]);
! 1310: GC_heap_bases[GC_n_heap_bases] = 0;
! 1311: }
! 1312: }
! 1313: }
! 1314:
! 1315:
! 1316: # endif
! 1317:
! 1318: #ifdef USE_MUNMAP
! 1319:
! 1320: /* For now, this only works on some Unix-like systems. If you */
! 1321: /* have something else, don't define USE_MUNMAP. */
! 1322: /* We assume ANSI C to support this feature. */
! 1323: #include <unistd.h>
! 1324: #include <sys/mman.h>
! 1325: #include <sys/stat.h>
! 1326: #include <sys/types.h>
! 1327: #include <fcntl.h>
! 1328:
! 1329: /* Compute a page aligned starting address for the unmap */
! 1330: /* operation on a block of size bytes starting at start. */
! 1331: /* Return 0 if the block is too small to make this feasible. */
! 1332: ptr_t GC_unmap_start(ptr_t start, word bytes)
! 1333: {
! 1334: ptr_t result = start;
! 1335: /* Round start to next page boundary. */
! 1336: result += GC_page_size - 1;
! 1337: result = (ptr_t)((word)result & ~(GC_page_size - 1));
! 1338: if (result + GC_page_size > start + bytes) return 0;
! 1339: return result;
! 1340: }
! 1341:
! 1342: /* Compute end address for an unmap operation on the indicated */
! 1343: /* block. */
! 1344: ptr_t GC_unmap_end(ptr_t start, word bytes)
! 1345: {
! 1346: ptr_t end_addr = start + bytes;
! 1347: end_addr = (ptr_t)((word)end_addr & ~(GC_page_size - 1));
! 1348: return end_addr;
! 1349: }
! 1350:
! 1351: /* We assume that GC_remap is called on exactly the same range */
! 1352: /* as a previous call to GC_unmap. It is safe to consistently */
! 1353: /* round the endpoints in both places. */
! 1354: void GC_unmap(ptr_t start, word bytes)
! 1355: {
! 1356: ptr_t start_addr = GC_unmap_start(start, bytes);
! 1357: ptr_t end_addr = GC_unmap_end(start, bytes);
! 1358: word len = end_addr - start_addr;
! 1359: if (0 == start_addr) return;
! 1360: if (munmap(start_addr, len) != 0) ABORT("munmap failed");
! 1361: GC_unmapped_bytes += len;
! 1362: }
! 1363:
! 1364:
! 1365: void GC_remap(ptr_t start, word bytes)
! 1366: {
! 1367: static int zero_descr = -1;
! 1368: ptr_t start_addr = GC_unmap_start(start, bytes);
! 1369: ptr_t end_addr = GC_unmap_end(start, bytes);
! 1370: word len = end_addr - start_addr;
! 1371: ptr_t result;
! 1372:
! 1373: if (-1 == zero_descr) zero_descr = open("/dev/zero", O_RDWR);
! 1374: if (0 == start_addr) return;
! 1375: result = mmap(start_addr, len, PROT_READ | PROT_WRITE | OPT_PROT_EXEC,
! 1376: MAP_FIXED | MAP_PRIVATE, zero_descr, 0);
! 1377: if (result != start_addr) {
! 1378: ABORT("mmap remapping failed");
! 1379: }
! 1380: GC_unmapped_bytes -= len;
! 1381: }
! 1382:
! 1383: /* Two adjacent blocks have already been unmapped and are about to */
! 1384: /* be merged. Unmap the whole block. This typically requires */
! 1385: /* that we unmap a small section in the middle that was not previously */
! 1386: /* unmapped due to alignment constraints. */
! 1387: void GC_unmap_gap(ptr_t start1, word bytes1, ptr_t start2, word bytes2)
! 1388: {
! 1389: ptr_t start1_addr = GC_unmap_start(start1, bytes1);
! 1390: ptr_t end1_addr = GC_unmap_end(start1, bytes1);
! 1391: ptr_t start2_addr = GC_unmap_start(start2, bytes2);
! 1392: ptr_t end2_addr = GC_unmap_end(start2, bytes2);
! 1393: ptr_t start_addr = end1_addr;
! 1394: ptr_t end_addr = start2_addr;
! 1395: word len;
! 1396: GC_ASSERT(start1 + bytes1 == start2);
! 1397: if (0 == start1_addr) start_addr = GC_unmap_start(start1, bytes1 + bytes2);
! 1398: if (0 == start2_addr) end_addr = GC_unmap_end(start1, bytes1 + bytes2);
! 1399: if (0 == start_addr) return;
! 1400: len = end_addr - start_addr;
! 1401: if (len != 0 && munmap(start_addr, len) != 0) ABORT("munmap failed");
! 1402: GC_unmapped_bytes += len;
! 1403: }
! 1404:
! 1405: #endif /* USE_MUNMAP */
! 1406:
! 1407: /* Routine for pushing any additional roots. In THREADS */
! 1408: /* environment, this is also responsible for marking from */
! 1409: /* thread stacks. In the SRC_M3 case, it also handles */
! 1410: /* global variables. */
! 1411: #ifndef THREADS
! 1412: void (*GC_push_other_roots)() = 0;
! 1413: #else /* THREADS */
! 1414:
! 1415: # ifdef PCR
! 1416: PCR_ERes GC_push_thread_stack(PCR_Th_T *t, PCR_Any dummy)
! 1417: {
! 1418: struct PCR_ThCtl_TInfoRep info;
! 1419: PCR_ERes result;
! 1420:
! 1421: info.ti_stkLow = info.ti_stkHi = 0;
! 1422: result = PCR_ThCtl_GetInfo(t, &info);
! 1423: GC_push_all_stack((ptr_t)(info.ti_stkLow), (ptr_t)(info.ti_stkHi));
! 1424: return(result);
! 1425: }
! 1426:
! 1427: /* Push the contents of an old object. We treat this as stack */
! 1428: /* data only becasue that makes it robust against mark stack */
! 1429: /* overflow. */
! 1430: PCR_ERes GC_push_old_obj(void *p, size_t size, PCR_Any data)
! 1431: {
! 1432: GC_push_all_stack((ptr_t)p, (ptr_t)p + size);
! 1433: return(PCR_ERes_okay);
! 1434: }
! 1435:
! 1436:
! 1437: void GC_default_push_other_roots()
! 1438: {
! 1439: /* Traverse data allocated by previous memory managers. */
! 1440: {
! 1441: extern struct PCR_MM_ProcsRep * GC_old_allocator;
! 1442:
! 1443: if ((*(GC_old_allocator->mmp_enumerate))(PCR_Bool_false,
! 1444: GC_push_old_obj, 0)
! 1445: != PCR_ERes_okay) {
! 1446: ABORT("Old object enumeration failed");
! 1447: }
! 1448: }
! 1449: /* Traverse all thread stacks. */
! 1450: if (PCR_ERes_IsErr(
! 1451: PCR_ThCtl_ApplyToAllOtherThreads(GC_push_thread_stack,0))
! 1452: || PCR_ERes_IsErr(GC_push_thread_stack(PCR_Th_CurrThread(), 0))) {
! 1453: ABORT("Thread stack marking failed\n");
! 1454: }
! 1455: }
! 1456:
! 1457: # endif /* PCR */
! 1458:
! 1459: # ifdef SRC_M3
! 1460:
! 1461: # ifdef ALL_INTERIOR_POINTERS
! 1462: --> misconfigured
! 1463: # endif
! 1464:
! 1465:
! 1466: extern void ThreadF__ProcessStacks();
! 1467:
! 1468: void GC_push_thread_stack(start, stop)
! 1469: word start, stop;
! 1470: {
! 1471: GC_push_all_stack((ptr_t)start, (ptr_t)stop + sizeof(word));
! 1472: }
! 1473:
! 1474: /* Push routine with M3 specific calling convention. */
! 1475: GC_m3_push_root(dummy1, p, dummy2, dummy3)
! 1476: word *p;
! 1477: ptr_t dummy1, dummy2;
! 1478: int dummy3;
! 1479: {
! 1480: word q = *p;
! 1481:
! 1482: if ((ptr_t)(q) >= GC_least_plausible_heap_addr
! 1483: && (ptr_t)(q) < GC_greatest_plausible_heap_addr) {
! 1484: GC_push_one_checked(q,FALSE);
! 1485: }
! 1486: }
! 1487:
! 1488: /* M3 set equivalent to RTHeap.TracedRefTypes */
! 1489: typedef struct { int elts[1]; } RefTypeSet;
! 1490: RefTypeSet GC_TracedRefTypes = {{0x1}};
! 1491:
! 1492: /* From finalize.c */
! 1493: extern void GC_push_finalizer_structures();
! 1494:
! 1495: /* From stubborn.c: */
! 1496: # ifdef STUBBORN_ALLOC
! 1497: extern GC_PTR * GC_changing_list_start;
! 1498: # endif
! 1499:
! 1500:
! 1501: void GC_default_push_other_roots()
! 1502: {
! 1503: /* Use the M3 provided routine for finding static roots. */
! 1504: /* This is a bit dubious, since it presumes no C roots. */
! 1505: /* We handle the collector roots explicitly. */
! 1506: {
! 1507: # ifdef STUBBORN_ALLOC
! 1508: GC_push_one(GC_changing_list_start);
! 1509: # endif
! 1510: GC_push_finalizer_structures();
! 1511: RTMain__GlobalMapProc(GC_m3_push_root, 0, GC_TracedRefTypes);
! 1512: }
! 1513: if (GC_words_allocd > 0) {
! 1514: ThreadF__ProcessStacks(GC_push_thread_stack);
! 1515: }
! 1516: /* Otherwise this isn't absolutely necessary, and we have */
! 1517: /* startup ordering problems. */
! 1518: }
! 1519:
! 1520: # endif /* SRC_M3 */
! 1521:
! 1522: # if defined(SOLARIS_THREADS) || defined(WIN32_THREADS) \
! 1523: || defined(IRIX_THREADS) || defined(LINUX_THREADS) \
! 1524: || defined(IRIX_JDK_THREADS) || defined(HPUX_THREADS)
! 1525:
! 1526: extern void GC_push_all_stacks();
! 1527:
! 1528: void GC_default_push_other_roots()
! 1529: {
! 1530: GC_push_all_stacks();
! 1531: }
! 1532:
! 1533: # endif /* SOLARIS_THREADS || ... */
! 1534:
! 1535: void (*GC_push_other_roots)() = GC_default_push_other_roots;
! 1536:
! 1537: #endif
! 1538:
! 1539: /*
! 1540: * Routines for accessing dirty bits on virtual pages.
! 1541: * We plan to eventaually implement four strategies for doing so:
! 1542: * DEFAULT_VDB: A simple dummy implementation that treats every page
! 1543: * as possibly dirty. This makes incremental collection
! 1544: * useless, but the implementation is still correct.
! 1545: * PCR_VDB: Use PPCRs virtual dirty bit facility.
! 1546: * PROC_VDB: Use the /proc facility for reading dirty bits. Only
! 1547: * works under some SVR4 variants. Even then, it may be
! 1548: * too slow to be entirely satisfactory. Requires reading
! 1549: * dirty bits for entire address space. Implementations tend
! 1550: * to assume that the client is a (slow) debugger.
! 1551: * MPROTECT_VDB:Protect pages and then catch the faults to keep track of
! 1552: * dirtied pages. The implementation (and implementability)
! 1553: * is highly system dependent. This usually fails when system
! 1554: * calls write to a protected page. We prevent the read system
! 1555: * call from doing so. It is the clients responsibility to
! 1556: * make sure that other system calls are similarly protected
! 1557: * or write only to the stack.
! 1558: */
! 1559:
! 1560: GC_bool GC_dirty_maintained = FALSE;
! 1561:
! 1562: # ifdef DEFAULT_VDB
! 1563:
! 1564: /* All of the following assume the allocation lock is held, and */
! 1565: /* signals are disabled. */
! 1566:
! 1567: /* The client asserts that unallocated pages in the heap are never */
! 1568: /* written. */
! 1569:
! 1570: /* Initialize virtual dirty bit implementation. */
! 1571: void GC_dirty_init()
! 1572: {
! 1573: GC_dirty_maintained = TRUE;
! 1574: }
! 1575:
! 1576: /* Retrieve system dirty bits for heap to a local buffer. */
! 1577: /* Restore the systems notion of which pages are dirty. */
! 1578: void GC_read_dirty()
! 1579: {}
! 1580:
! 1581: /* Is the HBLKSIZE sized page at h marked dirty in the local buffer? */
! 1582: /* If the actual page size is different, this returns TRUE if any */
! 1583: /* of the pages overlapping h are dirty. This routine may err on the */
! 1584: /* side of labelling pages as dirty (and this implementation does). */
! 1585: /*ARGSUSED*/
! 1586: GC_bool GC_page_was_dirty(h)
! 1587: struct hblk *h;
! 1588: {
! 1589: return(TRUE);
! 1590: }
! 1591:
! 1592: /*
! 1593: * The following two routines are typically less crucial. They matter
! 1594: * most with large dynamic libraries, or if we can't accurately identify
! 1595: * stacks, e.g. under Solaris 2.X. Otherwise the following default
! 1596: * versions are adequate.
! 1597: */
! 1598:
! 1599: /* Could any valid GC heap pointer ever have been written to this page? */
! 1600: /*ARGSUSED*/
! 1601: GC_bool GC_page_was_ever_dirty(h)
! 1602: struct hblk *h;
! 1603: {
! 1604: return(TRUE);
! 1605: }
! 1606:
! 1607: /* Reset the n pages starting at h to "was never dirty" status. */
! 1608: void GC_is_fresh(h, n)
! 1609: struct hblk *h;
! 1610: word n;
! 1611: {
! 1612: }
! 1613:
! 1614: /* A call hints that h is about to be written. */
! 1615: /* May speed up some dirty bit implementations. */
! 1616: /*ARGSUSED*/
! 1617: void GC_write_hint(h)
! 1618: struct hblk *h;
! 1619: {
! 1620: }
! 1621:
! 1622: # endif /* DEFAULT_VDB */
! 1623:
! 1624:
! 1625: # ifdef MPROTECT_VDB
! 1626:
! 1627: /*
! 1628: * See DEFAULT_VDB for interface descriptions.
! 1629: */
! 1630:
! 1631: /*
! 1632: * This implementation maintains dirty bits itself by catching write
! 1633: * faults and keeping track of them. We assume nobody else catches
! 1634: * SIGBUS or SIGSEGV. We assume no write faults occur in system calls
! 1635: * except as a result of a read system call. This means clients must
! 1636: * either ensure that system calls do not touch the heap, or must
! 1637: * provide their own wrappers analogous to the one for read.
! 1638: * We assume the page size is a multiple of HBLKSIZE.
! 1639: * This implementation is currently SunOS 4.X and IRIX 5.X specific, though we
! 1640: * tried to use portable code where easily possible. It is known
! 1641: * not to work under a number of other systems.
! 1642: */
! 1643:
! 1644: # ifndef MSWIN32
! 1645:
! 1646: # include <sys/mman.h>
! 1647: # include <signal.h>
! 1648: # include <sys/syscall.h>
! 1649:
! 1650: # define PROTECT(addr, len) \
! 1651: if (mprotect((caddr_t)(addr), (size_t)(len), \
! 1652: PROT_READ | OPT_PROT_EXEC) < 0) { \
! 1653: ABORT("mprotect failed"); \
! 1654: }
! 1655: # define UNPROTECT(addr, len) \
! 1656: if (mprotect((caddr_t)(addr), (size_t)(len), \
! 1657: PROT_WRITE | PROT_READ | OPT_PROT_EXEC ) < 0) { \
! 1658: ABORT("un-mprotect failed"); \
! 1659: }
! 1660:
! 1661: # else
! 1662:
! 1663: # include <signal.h>
! 1664:
! 1665: static DWORD protect_junk;
! 1666: # define PROTECT(addr, len) \
! 1667: if (!VirtualProtect((addr), (len), PAGE_EXECUTE_READ, \
! 1668: &protect_junk)) { \
! 1669: DWORD last_error = GetLastError(); \
! 1670: GC_printf1("Last error code: %lx\n", last_error); \
! 1671: ABORT("VirtualProtect failed"); \
! 1672: }
! 1673: # define UNPROTECT(addr, len) \
! 1674: if (!VirtualProtect((addr), (len), PAGE_EXECUTE_READWRITE, \
! 1675: &protect_junk)) { \
! 1676: ABORT("un-VirtualProtect failed"); \
! 1677: }
! 1678:
! 1679: # endif
! 1680:
! 1681: #if defined(SUNOS4) || defined(FREEBSD)
! 1682: typedef void (* SIG_PF)();
! 1683: #endif
! 1684: #if defined(SUNOS5SIGS) || defined(OSF1) || defined(LINUX)
! 1685: # ifdef __STDC__
! 1686: typedef void (* SIG_PF)(int);
! 1687: # else
! 1688: typedef void (* SIG_PF)();
! 1689: # endif
! 1690: #endif
! 1691: #if defined(MSWIN32)
! 1692: typedef LPTOP_LEVEL_EXCEPTION_FILTER SIG_PF;
! 1693: # undef SIG_DFL
! 1694: # define SIG_DFL (LPTOP_LEVEL_EXCEPTION_FILTER) (-1)
! 1695: #endif
! 1696:
! 1697: #if defined(IRIX5) || defined(OSF1)
! 1698: typedef void (* REAL_SIG_PF)(int, int, struct sigcontext *);
! 1699: #endif
! 1700: #if defined(SUNOS5SIGS)
! 1701: # ifdef HPUX
! 1702: # define SIGINFO __siginfo
! 1703: # else
! 1704: # define SIGINFO siginfo
! 1705: # endif
! 1706: # ifdef __STDC__
! 1707: typedef void (* REAL_SIG_PF)(int, struct SIGINFO *, void *);
! 1708: # else
! 1709: typedef void (* REAL_SIG_PF)();
! 1710: # endif
! 1711: #endif
! 1712: #if defined(LINUX)
! 1713: # include <linux/version.h>
! 1714: # if (LINUX_VERSION_CODE >= 0x20100) && !defined(M68K) || defined(ALPHA) || defined(IA64)
! 1715: typedef struct sigcontext s_c;
! 1716: # else
! 1717: typedef struct sigcontext_struct s_c;
! 1718: # endif
! 1719: # if defined(ALPHA) || defined(M68K)
! 1720: typedef void (* REAL_SIG_PF)(int, int, s_c *);
! 1721: # else
! 1722: # if defined(IA64)
! 1723: typedef void (* REAL_SIG_PF)(int, siginfo_t *, s_c *);
! 1724: # else
! 1725: typedef void (* REAL_SIG_PF)(int, s_c);
! 1726: # endif
! 1727: # endif
! 1728: # ifdef ALPHA
! 1729: /* Retrieve fault address from sigcontext structure by decoding */
! 1730: /* instruction. */
! 1731: char * get_fault_addr(s_c *sc) {
! 1732: unsigned instr;
! 1733: word faultaddr;
! 1734:
! 1735: instr = *((unsigned *)(sc->sc_pc));
! 1736: faultaddr = sc->sc_regs[(instr >> 16) & 0x1f];
! 1737: faultaddr += (word) (((int)instr << 16) >> 16);
! 1738: return (char *)faultaddr;
! 1739: }
! 1740: # endif /* !ALPHA */
! 1741: # endif
! 1742:
! 1743: SIG_PF GC_old_bus_handler;
! 1744: SIG_PF GC_old_segv_handler; /* Also old MSWIN32 ACCESS_VIOLATION filter */
! 1745:
! 1746: /*ARGSUSED*/
! 1747: # if defined (SUNOS4) || defined(FREEBSD)
! 1748: void GC_write_fault_handler(sig, code, scp, addr)
! 1749: int sig, code;
! 1750: struct sigcontext *scp;
! 1751: char * addr;
! 1752: # ifdef SUNOS4
! 1753: # define SIG_OK (sig == SIGSEGV || sig == SIGBUS)
! 1754: # define CODE_OK (FC_CODE(code) == FC_PROT \
! 1755: || (FC_CODE(code) == FC_OBJERR \
! 1756: && FC_ERRNO(code) == FC_PROT))
! 1757: # endif
! 1758: # ifdef FREEBSD
! 1759: # define SIG_OK (sig == SIGBUS)
! 1760: # define CODE_OK (code == BUS_PAGE_FAULT)
! 1761: # endif
! 1762: # endif
! 1763: # if defined(IRIX5) || defined(OSF1)
! 1764: # include <errno.h>
! 1765: void GC_write_fault_handler(int sig, int code, struct sigcontext *scp)
! 1766: # define SIG_OK (sig == SIGSEGV)
! 1767: # ifdef OSF1
! 1768: # define CODE_OK (code == 2 /* experimentally determined */)
! 1769: # endif
! 1770: # ifdef IRIX5
! 1771: # define CODE_OK (code == EACCES)
! 1772: # endif
! 1773: # endif
! 1774: # if defined(LINUX)
! 1775: # if defined(ALPHA) || defined(M68K)
! 1776: void GC_write_fault_handler(int sig, int code, s_c * sc)
! 1777: # else
! 1778: # if defined(IA64)
! 1779: void GC_write_fault_handler(int sig, siginfo_t * si, s_c * scp)
! 1780: # else
! 1781: void GC_write_fault_handler(int sig, s_c sc)
! 1782: # endif
! 1783: # endif
! 1784: # define SIG_OK (sig == SIGSEGV)
! 1785: # define CODE_OK TRUE
! 1786: /* Empirically c.trapno == 14, on IA32, but is that useful? */
! 1787: /* Should probably consider alignment issues on other */
! 1788: /* architectures. */
! 1789: # endif
! 1790: # if defined(SUNOS5SIGS)
! 1791: # ifdef __STDC__
! 1792: void GC_write_fault_handler(int sig, struct SIGINFO *scp, void * context)
! 1793: # else
! 1794: void GC_write_fault_handler(sig, scp, context)
! 1795: int sig;
! 1796: struct SIGINFO *scp;
! 1797: void * context;
! 1798: # endif
! 1799: # ifdef HPUX
! 1800: # define SIG_OK (sig == SIGSEGV || sig == SIGBUS)
! 1801: # define CODE_OK (scp -> si_code == SEGV_ACCERR) \
! 1802: || (scp -> si_code == BUS_ADRERR) \
! 1803: || (scp -> si_code == BUS_UNKNOWN) \
! 1804: || (scp -> si_code == SEGV_UNKNOWN) \
! 1805: || (scp -> si_code == BUS_OBJERR)
! 1806: # else
! 1807: # define SIG_OK (sig == SIGSEGV)
! 1808: # define CODE_OK (scp -> si_code == SEGV_ACCERR)
! 1809: # endif
! 1810: # endif
! 1811: # if defined(MSWIN32)
! 1812: LONG WINAPI GC_write_fault_handler(struct _EXCEPTION_POINTERS *exc_info)
! 1813: # define SIG_OK (exc_info -> ExceptionRecord -> ExceptionCode == \
! 1814: EXCEPTION_ACCESS_VIOLATION)
! 1815: # define CODE_OK (exc_info -> ExceptionRecord -> ExceptionInformation[0] == 1)
! 1816: /* Write fault */
! 1817: # endif
! 1818: {
! 1819: register unsigned i;
! 1820: # ifdef IRIX5
! 1821: char * addr = (char *) (size_t) (scp -> sc_badvaddr);
! 1822: # endif
! 1823: # if defined(OSF1) && defined(ALPHA)
! 1824: char * addr = (char *) (scp -> sc_traparg_a0);
! 1825: # endif
! 1826: # ifdef SUNOS5SIGS
! 1827: char * addr = (char *) (scp -> si_addr);
! 1828: # endif
! 1829: # ifdef LINUX
! 1830: # ifdef I386
! 1831: char * addr = (char *) (sc.cr2);
! 1832: # else
! 1833: # if defined(M68K)
! 1834: char * addr = NULL;
! 1835:
! 1836: struct sigcontext *scp = (struct sigcontext *)(&sc);
! 1837:
! 1838: int format = (scp->sc_formatvec >> 12) & 0xf;
! 1839: unsigned long *framedata = (unsigned long *)(scp + 1);
! 1840: unsigned long ea;
! 1841:
! 1842: if (format == 0xa || format == 0xb) {
! 1843: /* 68020/030 */
! 1844: ea = framedata[2];
! 1845: } else if (format == 7) {
! 1846: /* 68040 */
! 1847: ea = framedata[3];
! 1848: } else if (format == 4) {
! 1849: /* 68060 */
! 1850: ea = framedata[0];
! 1851: if (framedata[1] & 0x08000000) {
! 1852: /* correct addr on misaligned access */
! 1853: ea = (ea+4095)&(~4095);
! 1854: }
! 1855: }
! 1856: addr = (char *)ea;
! 1857: # else
! 1858: # ifdef ALPHA
! 1859: char * addr = get_fault_addr(sc);
! 1860: # else
! 1861: # ifdef IA64
! 1862: char * addr = si -> si_addr;
! 1863: /* I believe this is claimed to work on all platforms for */
! 1864: /* Linux 2.3.47 and later. Hopefully we don't have to */
! 1865: /* worry about earlier kernels on IA64. */
! 1866: # else
! 1867: # if defined(POWERPC)
! 1868: char * addr = (char *) (sc.regs->dar);
! 1869: # else
! 1870: --> architecture not supported
! 1871: # endif
! 1872: # endif
! 1873: # endif
! 1874: # endif
! 1875: # endif
! 1876: # endif
! 1877: # if defined(MSWIN32)
! 1878: char * addr = (char *) (exc_info -> ExceptionRecord
! 1879: -> ExceptionInformation[1]);
! 1880: # define sig SIGSEGV
! 1881: # endif
! 1882:
! 1883: if (SIG_OK && CODE_OK) {
! 1884: register struct hblk * h =
! 1885: (struct hblk *)((word)addr & ~(GC_page_size-1));
! 1886: GC_bool in_allocd_block;
! 1887:
! 1888: # ifdef SUNOS5SIGS
! 1889: /* Address is only within the correct physical page. */
! 1890: in_allocd_block = FALSE;
! 1891: for (i = 0; i < divHBLKSZ(GC_page_size); i++) {
! 1892: if (HDR(h+i) != 0) {
! 1893: in_allocd_block = TRUE;
! 1894: }
! 1895: }
! 1896: # else
! 1897: in_allocd_block = (HDR(addr) != 0);
! 1898: # endif
! 1899: if (!in_allocd_block) {
! 1900: /* Heap blocks now begin and end on page boundaries */
! 1901: SIG_PF old_handler;
! 1902:
! 1903: if (sig == SIGSEGV) {
! 1904: old_handler = GC_old_segv_handler;
! 1905: } else {
! 1906: old_handler = GC_old_bus_handler;
! 1907: }
! 1908: if (old_handler == SIG_DFL) {
! 1909: # ifndef MSWIN32
! 1910: GC_err_printf1("Segfault at 0x%lx\n", addr);
! 1911: ABORT("Unexpected bus error or segmentation fault");
! 1912: # else
! 1913: return(EXCEPTION_CONTINUE_SEARCH);
! 1914: # endif
! 1915: } else {
! 1916: # if defined (SUNOS4) || defined(FREEBSD)
! 1917: (*old_handler) (sig, code, scp, addr);
! 1918: return;
! 1919: # endif
! 1920: # if defined (SUNOS5SIGS)
! 1921: (*(REAL_SIG_PF)old_handler) (sig, scp, context);
! 1922: return;
! 1923: # endif
! 1924: # if defined (LINUX)
! 1925: # if defined(ALPHA) || defined(M68K)
! 1926: (*(REAL_SIG_PF)old_handler) (sig, code, sc);
! 1927: # else
! 1928: # if defined(IA64)
! 1929: (*(REAL_SIG_PF)old_handler) (sig, si, scp);
! 1930: # else
! 1931: (*(REAL_SIG_PF)old_handler) (sig, sc);
! 1932: # endif
! 1933: # endif
! 1934: return;
! 1935: # endif
! 1936: # if defined (IRIX5) || defined(OSF1)
! 1937: (*(REAL_SIG_PF)old_handler) (sig, code, scp);
! 1938: return;
! 1939: # endif
! 1940: # ifdef MSWIN32
! 1941: return((*old_handler)(exc_info));
! 1942: # endif
! 1943: }
! 1944: }
! 1945: for (i = 0; i < divHBLKSZ(GC_page_size); i++) {
! 1946: register int index = PHT_HASH(h+i);
! 1947:
! 1948: set_pht_entry_from_index(GC_dirty_pages, index);
! 1949: }
! 1950: UNPROTECT(h, GC_page_size);
! 1951: # if defined(OSF1) || defined(LINUX)
! 1952: /* These reset the signal handler each time by default. */
! 1953: signal(SIGSEGV, (SIG_PF) GC_write_fault_handler);
! 1954: # endif
! 1955: /* The write may not take place before dirty bits are read. */
! 1956: /* But then we'll fault again ... */
! 1957: # ifdef MSWIN32
! 1958: return(EXCEPTION_CONTINUE_EXECUTION);
! 1959: # else
! 1960: return;
! 1961: # endif
! 1962: }
! 1963: #ifdef MSWIN32
! 1964: return EXCEPTION_CONTINUE_SEARCH;
! 1965: #else
! 1966: GC_err_printf1("Segfault at 0x%lx\n", addr);
! 1967: ABORT("Unexpected bus error or segmentation fault");
! 1968: #endif
! 1969: }
! 1970:
! 1971: /*
! 1972: * We hold the allocation lock. We expect block h to be written
! 1973: * shortly.
! 1974: */
! 1975: void GC_write_hint(h)
! 1976: struct hblk *h;
! 1977: {
! 1978: register struct hblk * h_trunc;
! 1979: register unsigned i;
! 1980: register GC_bool found_clean;
! 1981:
! 1982: if (!GC_dirty_maintained) return;
! 1983: h_trunc = (struct hblk *)((word)h & ~(GC_page_size-1));
! 1984: found_clean = FALSE;
! 1985: for (i = 0; i < divHBLKSZ(GC_page_size); i++) {
! 1986: register int index = PHT_HASH(h_trunc+i);
! 1987:
! 1988: if (!get_pht_entry_from_index(GC_dirty_pages, index)) {
! 1989: found_clean = TRUE;
! 1990: set_pht_entry_from_index(GC_dirty_pages, index);
! 1991: }
! 1992: }
! 1993: if (found_clean) {
! 1994: UNPROTECT(h_trunc, GC_page_size);
! 1995: }
! 1996: }
! 1997:
! 1998: void GC_dirty_init()
! 1999: {
! 2000: #if defined(SUNOS5SIGS) || defined(IRIX5) /* || defined(OSF1) */
! 2001: struct sigaction act, oldact;
! 2002: # ifdef IRIX5
! 2003: act.sa_flags = SA_RESTART;
! 2004: act.sa_handler = GC_write_fault_handler;
! 2005: # else
! 2006: act.sa_flags = SA_RESTART | SA_SIGINFO;
! 2007: act.sa_sigaction = GC_write_fault_handler;
! 2008: # endif
! 2009: (void)sigemptyset(&act.sa_mask);
! 2010: #endif
! 2011: # ifdef PRINTSTATS
! 2012: GC_printf0("Inititalizing mprotect virtual dirty bit implementation\n");
! 2013: # endif
! 2014: GC_dirty_maintained = TRUE;
! 2015: if (GC_page_size % HBLKSIZE != 0) {
! 2016: GC_err_printf0("Page size not multiple of HBLKSIZE\n");
! 2017: ABORT("Page size not multiple of HBLKSIZE");
! 2018: }
! 2019: # if defined(SUNOS4) || defined(FREEBSD)
! 2020: GC_old_bus_handler = signal(SIGBUS, GC_write_fault_handler);
! 2021: if (GC_old_bus_handler == SIG_IGN) {
! 2022: GC_err_printf0("Previously ignored bus error!?");
! 2023: GC_old_bus_handler = SIG_DFL;
! 2024: }
! 2025: if (GC_old_bus_handler != SIG_DFL) {
! 2026: # ifdef PRINTSTATS
! 2027: GC_err_printf0("Replaced other SIGBUS handler\n");
! 2028: # endif
! 2029: }
! 2030: # endif
! 2031: # if defined(OSF1) || defined(SUNOS4) || defined(LINUX)
! 2032: GC_old_segv_handler = signal(SIGSEGV, (SIG_PF)GC_write_fault_handler);
! 2033: if (GC_old_segv_handler == SIG_IGN) {
! 2034: GC_err_printf0("Previously ignored segmentation violation!?");
! 2035: GC_old_segv_handler = SIG_DFL;
! 2036: }
! 2037: if (GC_old_segv_handler != SIG_DFL) {
! 2038: # ifdef PRINTSTATS
! 2039: GC_err_printf0("Replaced other SIGSEGV handler\n");
! 2040: # endif
! 2041: }
! 2042: # endif
! 2043: # if defined(SUNOS5SIGS) || defined(IRIX5)
! 2044: # if defined(IRIX_THREADS) || defined(IRIX_JDK_THREADS)
! 2045: sigaction(SIGSEGV, 0, &oldact);
! 2046: sigaction(SIGSEGV, &act, 0);
! 2047: # else
! 2048: sigaction(SIGSEGV, &act, &oldact);
! 2049: # endif
! 2050: # if defined(_sigargs)
! 2051: /* This is Irix 5.x, not 6.x. Irix 5.x does not have */
! 2052: /* sa_sigaction. */
! 2053: GC_old_segv_handler = oldact.sa_handler;
! 2054: # else /* Irix 6.x or SUNOS5SIGS */
! 2055: if (oldact.sa_flags & SA_SIGINFO) {
! 2056: GC_old_segv_handler = (SIG_PF)(oldact.sa_sigaction);
! 2057: } else {
! 2058: GC_old_segv_handler = oldact.sa_handler;
! 2059: }
! 2060: # endif
! 2061: if (GC_old_segv_handler == SIG_IGN) {
! 2062: GC_err_printf0("Previously ignored segmentation violation!?");
! 2063: GC_old_segv_handler = SIG_DFL;
! 2064: }
! 2065: if (GC_old_segv_handler != SIG_DFL) {
! 2066: # ifdef PRINTSTATS
! 2067: GC_err_printf0("Replaced other SIGSEGV handler\n");
! 2068: # endif
! 2069: }
! 2070: # ifdef HPUX
! 2071: sigaction(SIGBUS, &act, &oldact);
! 2072: GC_old_bus_handler = oldact.sa_handler;
! 2073: if (GC_old_segv_handler != SIG_DFL) {
! 2074: # ifdef PRINTSTATS
! 2075: GC_err_printf0("Replaced other SIGBUS handler\n");
! 2076: # endif
! 2077: }
! 2078: # endif
! 2079: # endif
! 2080: # if defined(MSWIN32)
! 2081: GC_old_segv_handler = SetUnhandledExceptionFilter(GC_write_fault_handler);
! 2082: if (GC_old_segv_handler != NULL) {
! 2083: # ifdef PRINTSTATS
! 2084: GC_err_printf0("Replaced other UnhandledExceptionFilter\n");
! 2085: # endif
! 2086: } else {
! 2087: GC_old_segv_handler = SIG_DFL;
! 2088: }
! 2089: # endif
! 2090: }
! 2091:
! 2092:
! 2093:
! 2094: void GC_protect_heap()
! 2095: {
! 2096: ptr_t start;
! 2097: word len;
! 2098: unsigned i;
! 2099:
! 2100: for (i = 0; i < GC_n_heap_sects; i++) {
! 2101: start = GC_heap_sects[i].hs_start;
! 2102: len = GC_heap_sects[i].hs_bytes;
! 2103: PROTECT(start, len);
! 2104: }
! 2105: }
! 2106:
! 2107: /* We assume that either the world is stopped or its OK to lose dirty */
! 2108: /* bits while this is happenning (as in GC_enable_incremental). */
! 2109: void GC_read_dirty()
! 2110: {
! 2111: BCOPY((word *)GC_dirty_pages, GC_grungy_pages,
! 2112: (sizeof GC_dirty_pages));
! 2113: BZERO((word *)GC_dirty_pages, (sizeof GC_dirty_pages));
! 2114: GC_protect_heap();
! 2115: }
! 2116:
! 2117: GC_bool GC_page_was_dirty(h)
! 2118: struct hblk * h;
! 2119: {
! 2120: register word index = PHT_HASH(h);
! 2121:
! 2122: return(HDR(h) == 0 || get_pht_entry_from_index(GC_grungy_pages, index));
! 2123: }
! 2124:
! 2125: /*
! 2126: * Acquiring the allocation lock here is dangerous, since this
! 2127: * can be called from within GC_call_with_alloc_lock, and the cord
! 2128: * package does so. On systems that allow nested lock acquisition, this
! 2129: * happens to work.
! 2130: * On other systems, SET_LOCK_HOLDER and friends must be suitably defined.
! 2131: */
! 2132:
! 2133: void GC_begin_syscall()
! 2134: {
! 2135: if (!I_HOLD_LOCK()) LOCK();
! 2136: }
! 2137:
! 2138: void GC_end_syscall()
! 2139: {
! 2140: if (!I_HOLD_LOCK()) UNLOCK();
! 2141: }
! 2142:
! 2143: void GC_unprotect_range(addr, len)
! 2144: ptr_t addr;
! 2145: word len;
! 2146: {
! 2147: struct hblk * start_block;
! 2148: struct hblk * end_block;
! 2149: register struct hblk *h;
! 2150: ptr_t obj_start;
! 2151:
! 2152: if (!GC_incremental) return;
! 2153: obj_start = GC_base(addr);
! 2154: if (obj_start == 0) return;
! 2155: if (GC_base(addr + len - 1) != obj_start) {
! 2156: ABORT("GC_unprotect_range(range bigger than object)");
! 2157: }
! 2158: start_block = (struct hblk *)((word)addr & ~(GC_page_size - 1));
! 2159: end_block = (struct hblk *)((word)(addr + len - 1) & ~(GC_page_size - 1));
! 2160: end_block += GC_page_size/HBLKSIZE - 1;
! 2161: for (h = start_block; h <= end_block; h++) {
! 2162: register word index = PHT_HASH(h);
! 2163:
! 2164: set_pht_entry_from_index(GC_dirty_pages, index);
! 2165: }
! 2166: UNPROTECT(start_block,
! 2167: ((ptr_t)end_block - (ptr_t)start_block) + HBLKSIZE);
! 2168: }
! 2169:
! 2170: #if !defined(MSWIN32) && !defined(LINUX_THREADS)
! 2171: /* Replacement for UNIX system call. */
! 2172: /* Other calls that write to the heap */
! 2173: /* should be handled similarly. */
! 2174: # if defined(__STDC__) && !defined(SUNOS4)
! 2175: # include <unistd.h>
! 2176: # include <sys/uio.h>
! 2177: ssize_t read(int fd, void *buf, size_t nbyte)
! 2178: # else
! 2179: # ifndef LINT
! 2180: int read(fd, buf, nbyte)
! 2181: # else
! 2182: int GC_read(fd, buf, nbyte)
! 2183: # endif
! 2184: int fd;
! 2185: char *buf;
! 2186: int nbyte;
! 2187: # endif
! 2188: {
! 2189: int result;
! 2190:
! 2191: GC_begin_syscall();
! 2192: GC_unprotect_range(buf, (word)nbyte);
! 2193: # if defined(IRIX5) || defined(LINUX_THREADS)
! 2194: /* Indirect system call may not always be easily available. */
! 2195: /* We could call _read, but that would interfere with the */
! 2196: /* libpthread interception of read. */
! 2197: /* On Linux, we have to be careful with the linuxthreads */
! 2198: /* read interception. */
! 2199: {
! 2200: struct iovec iov;
! 2201:
! 2202: iov.iov_base = buf;
! 2203: iov.iov_len = nbyte;
! 2204: result = readv(fd, &iov, 1);
! 2205: }
! 2206: # else
! 2207: result = syscall(SYS_read, fd, buf, nbyte);
! 2208: # endif
! 2209: GC_end_syscall();
! 2210: return(result);
! 2211: }
! 2212: #endif /* !MSWIN32 && !LINUX */
! 2213:
! 2214: #ifdef USE_LD_WRAP
! 2215: /* We use the GNU ld call wrapping facility. */
! 2216: /* This requires that the linker be invoked with "--wrap read". */
! 2217: /* This can be done by passing -Wl,"--wrap read" to gcc. */
! 2218: /* I'm not sure that this actually wraps whatever version of read */
! 2219: /* is called by stdio. That code also mentions __read. */
! 2220: # include <unistd.h>
! 2221: ssize_t __wrap_read(int fd, void *buf, size_t nbyte)
! 2222: {
! 2223: int result;
! 2224:
! 2225: GC_begin_syscall();
! 2226: GC_unprotect_range(buf, (word)nbyte);
! 2227: result = __real_read(fd, buf, nbyte);
! 2228: GC_end_syscall();
! 2229: return(result);
! 2230: }
! 2231:
! 2232: /* We should probably also do this for __read, or whatever stdio */
! 2233: /* actually calls. */
! 2234: #endif
! 2235:
! 2236: /*ARGSUSED*/
! 2237: GC_bool GC_page_was_ever_dirty(h)
! 2238: struct hblk *h;
! 2239: {
! 2240: return(TRUE);
! 2241: }
! 2242:
! 2243: /* Reset the n pages starting at h to "was never dirty" status. */
! 2244: /*ARGSUSED*/
! 2245: void GC_is_fresh(h, n)
! 2246: struct hblk *h;
! 2247: word n;
! 2248: {
! 2249: }
! 2250:
! 2251: # endif /* MPROTECT_VDB */
! 2252:
! 2253: # ifdef PROC_VDB
! 2254:
! 2255: /*
! 2256: * See DEFAULT_VDB for interface descriptions.
! 2257: */
! 2258:
! 2259: /*
! 2260: * This implementaion assumes a Solaris 2.X like /proc pseudo-file-system
! 2261: * from which we can read page modified bits. This facility is far from
! 2262: * optimal (e.g. we would like to get the info for only some of the
! 2263: * address space), but it avoids intercepting system calls.
! 2264: */
! 2265:
! 2266: #include <errno.h>
! 2267: #include <sys/types.h>
! 2268: #include <sys/signal.h>
! 2269: #include <sys/fault.h>
! 2270: #include <sys/syscall.h>
! 2271: #include <sys/procfs.h>
! 2272: #include <sys/stat.h>
! 2273: #include <fcntl.h>
! 2274:
! 2275: #define INITIAL_BUF_SZ 4096
! 2276: word GC_proc_buf_size = INITIAL_BUF_SZ;
! 2277: char *GC_proc_buf;
! 2278:
! 2279: #ifdef SOLARIS_THREADS
! 2280: /* We don't have exact sp values for threads. So we count on */
! 2281: /* occasionally declaring stack pages to be fresh. Thus we */
! 2282: /* need a real implementation of GC_is_fresh. We can't clear */
! 2283: /* entries in GC_written_pages, since that would declare all */
! 2284: /* pages with the given hash address to be fresh. */
! 2285: # define MAX_FRESH_PAGES 8*1024 /* Must be power of 2 */
! 2286: struct hblk ** GC_fresh_pages; /* A direct mapped cache. */
! 2287: /* Collisions are dropped. */
! 2288:
! 2289: # define FRESH_PAGE_SLOT(h) (divHBLKSZ((word)(h)) & (MAX_FRESH_PAGES-1))
! 2290: # define ADD_FRESH_PAGE(h) \
! 2291: GC_fresh_pages[FRESH_PAGE_SLOT(h)] = (h)
! 2292: # define PAGE_IS_FRESH(h) \
! 2293: (GC_fresh_pages[FRESH_PAGE_SLOT(h)] == (h) && (h) != 0)
! 2294: #endif
! 2295:
! 2296: /* Add all pages in pht2 to pht1 */
! 2297: void GC_or_pages(pht1, pht2)
! 2298: page_hash_table pht1, pht2;
! 2299: {
! 2300: register int i;
! 2301:
! 2302: for (i = 0; i < PHT_SIZE; i++) pht1[i] |= pht2[i];
! 2303: }
! 2304:
! 2305: int GC_proc_fd;
! 2306:
! 2307: void GC_dirty_init()
! 2308: {
! 2309: int fd;
! 2310: char buf[30];
! 2311:
! 2312: GC_dirty_maintained = TRUE;
! 2313: if (GC_words_allocd != 0 || GC_words_allocd_before_gc != 0) {
! 2314: register int i;
! 2315:
! 2316: for (i = 0; i < PHT_SIZE; i++) GC_written_pages[i] = (word)(-1);
! 2317: # ifdef PRINTSTATS
! 2318: GC_printf1("Allocated words:%lu:all pages may have been written\n",
! 2319: (unsigned long)
! 2320: (GC_words_allocd + GC_words_allocd_before_gc));
! 2321: # endif
! 2322: }
! 2323: sprintf(buf, "/proc/%d", getpid());
! 2324: fd = open(buf, O_RDONLY);
! 2325: if (fd < 0) {
! 2326: ABORT("/proc open failed");
! 2327: }
! 2328: GC_proc_fd = syscall(SYS_ioctl, fd, PIOCOPENPD, 0);
! 2329: close(fd);
! 2330: if (GC_proc_fd < 0) {
! 2331: ABORT("/proc ioctl failed");
! 2332: }
! 2333: GC_proc_buf = GC_scratch_alloc(GC_proc_buf_size);
! 2334: # ifdef SOLARIS_THREADS
! 2335: GC_fresh_pages = (struct hblk **)
! 2336: GC_scratch_alloc(MAX_FRESH_PAGES * sizeof (struct hblk *));
! 2337: if (GC_fresh_pages == 0) {
! 2338: GC_err_printf0("No space for fresh pages\n");
! 2339: EXIT();
! 2340: }
! 2341: BZERO(GC_fresh_pages, MAX_FRESH_PAGES * sizeof (struct hblk *));
! 2342: # endif
! 2343: }
! 2344:
! 2345: /* Ignore write hints. They don't help us here. */
! 2346: /*ARGSUSED*/
! 2347: void GC_write_hint(h)
! 2348: struct hblk *h;
! 2349: {
! 2350: }
! 2351:
! 2352: #ifdef SOLARIS_THREADS
! 2353: # define READ(fd,buf,nbytes) syscall(SYS_read, fd, buf, nbytes)
! 2354: #else
! 2355: # define READ(fd,buf,nbytes) read(fd, buf, nbytes)
! 2356: #endif
! 2357:
! 2358: void GC_read_dirty()
! 2359: {
! 2360: unsigned long ps, np;
! 2361: int nmaps;
! 2362: ptr_t vaddr;
! 2363: struct prasmap * map;
! 2364: char * bufp;
! 2365: ptr_t current_addr, limit;
! 2366: int i;
! 2367: int dummy;
! 2368:
! 2369: BZERO(GC_grungy_pages, (sizeof GC_grungy_pages));
! 2370:
! 2371: bufp = GC_proc_buf;
! 2372: if (READ(GC_proc_fd, bufp, GC_proc_buf_size) <= 0) {
! 2373: # ifdef PRINTSTATS
! 2374: GC_printf1("/proc read failed: GC_proc_buf_size = %lu\n",
! 2375: GC_proc_buf_size);
! 2376: # endif
! 2377: {
! 2378: /* Retry with larger buffer. */
! 2379: word new_size = 2 * GC_proc_buf_size;
! 2380: char * new_buf = GC_scratch_alloc(new_size);
! 2381:
! 2382: if (new_buf != 0) {
! 2383: GC_proc_buf = bufp = new_buf;
! 2384: GC_proc_buf_size = new_size;
! 2385: }
! 2386: if (syscall(SYS_read, GC_proc_fd, bufp, GC_proc_buf_size) <= 0) {
! 2387: WARN("Insufficient space for /proc read\n", 0);
! 2388: /* Punt: */
! 2389: memset(GC_grungy_pages, 0xff, sizeof (page_hash_table));
! 2390: memset(GC_written_pages, 0xff, sizeof(page_hash_table));
! 2391: # ifdef SOLARIS_THREADS
! 2392: BZERO(GC_fresh_pages,
! 2393: MAX_FRESH_PAGES * sizeof (struct hblk *));
! 2394: # endif
! 2395: return;
! 2396: }
! 2397: }
! 2398: }
! 2399: /* Copy dirty bits into GC_grungy_pages */
! 2400: nmaps = ((struct prpageheader *)bufp) -> pr_nmap;
! 2401: /* printf( "nmaps = %d, PG_REFERENCED = %d, PG_MODIFIED = %d\n",
! 2402: nmaps, PG_REFERENCED, PG_MODIFIED); */
! 2403: bufp = bufp + sizeof(struct prpageheader);
! 2404: for (i = 0; i < nmaps; i++) {
! 2405: map = (struct prasmap *)bufp;
! 2406: vaddr = (ptr_t)(map -> pr_vaddr);
! 2407: ps = map -> pr_pagesize;
! 2408: np = map -> pr_npage;
! 2409: /* printf("vaddr = 0x%X, ps = 0x%X, np = 0x%X\n", vaddr, ps, np); */
! 2410: limit = vaddr + ps * np;
! 2411: bufp += sizeof (struct prasmap);
! 2412: for (current_addr = vaddr;
! 2413: current_addr < limit; current_addr += ps){
! 2414: if ((*bufp++) & PG_MODIFIED) {
! 2415: register struct hblk * h = (struct hblk *) current_addr;
! 2416:
! 2417: while ((ptr_t)h < current_addr + ps) {
! 2418: register word index = PHT_HASH(h);
! 2419:
! 2420: set_pht_entry_from_index(GC_grungy_pages, index);
! 2421: # ifdef SOLARIS_THREADS
! 2422: {
! 2423: register int slot = FRESH_PAGE_SLOT(h);
! 2424:
! 2425: if (GC_fresh_pages[slot] == h) {
! 2426: GC_fresh_pages[slot] = 0;
! 2427: }
! 2428: }
! 2429: # endif
! 2430: h++;
! 2431: }
! 2432: }
! 2433: }
! 2434: bufp += sizeof(long) - 1;
! 2435: bufp = (char *)((unsigned long)bufp & ~(sizeof(long)-1));
! 2436: }
! 2437: /* Update GC_written_pages. */
! 2438: GC_or_pages(GC_written_pages, GC_grungy_pages);
! 2439: # ifdef SOLARIS_THREADS
! 2440: /* Make sure that old stacks are considered completely clean */
! 2441: /* unless written again. */
! 2442: GC_old_stacks_are_fresh();
! 2443: # endif
! 2444: }
! 2445:
! 2446: #undef READ
! 2447:
! 2448: GC_bool GC_page_was_dirty(h)
! 2449: struct hblk *h;
! 2450: {
! 2451: register word index = PHT_HASH(h);
! 2452: register GC_bool result;
! 2453:
! 2454: result = get_pht_entry_from_index(GC_grungy_pages, index);
! 2455: # ifdef SOLARIS_THREADS
! 2456: if (result && PAGE_IS_FRESH(h)) result = FALSE;
! 2457: /* This happens only if page was declared fresh since */
! 2458: /* the read_dirty call, e.g. because it's in an unused */
! 2459: /* thread stack. It's OK to treat it as clean, in */
! 2460: /* that case. And it's consistent with */
! 2461: /* GC_page_was_ever_dirty. */
! 2462: # endif
! 2463: return(result);
! 2464: }
! 2465:
! 2466: GC_bool GC_page_was_ever_dirty(h)
! 2467: struct hblk *h;
! 2468: {
! 2469: register word index = PHT_HASH(h);
! 2470: register GC_bool result;
! 2471:
! 2472: result = get_pht_entry_from_index(GC_written_pages, index);
! 2473: # ifdef SOLARIS_THREADS
! 2474: if (result && PAGE_IS_FRESH(h)) result = FALSE;
! 2475: # endif
! 2476: return(result);
! 2477: }
! 2478:
! 2479: /* Caller holds allocation lock. */
! 2480: void GC_is_fresh(h, n)
! 2481: struct hblk *h;
! 2482: word n;
! 2483: {
! 2484:
! 2485: register word index;
! 2486:
! 2487: # ifdef SOLARIS_THREADS
! 2488: register word i;
! 2489:
! 2490: if (GC_fresh_pages != 0) {
! 2491: for (i = 0; i < n; i++) {
! 2492: ADD_FRESH_PAGE(h + i);
! 2493: }
! 2494: }
! 2495: # endif
! 2496: }
! 2497:
! 2498: # endif /* PROC_VDB */
! 2499:
! 2500:
! 2501: # ifdef PCR_VDB
! 2502:
! 2503: # include "vd/PCR_VD.h"
! 2504:
! 2505: # define NPAGES (32*1024) /* 128 MB */
! 2506:
! 2507: PCR_VD_DB GC_grungy_bits[NPAGES];
! 2508:
! 2509: ptr_t GC_vd_base; /* Address corresponding to GC_grungy_bits[0] */
! 2510: /* HBLKSIZE aligned. */
! 2511:
! 2512: void GC_dirty_init()
! 2513: {
! 2514: GC_dirty_maintained = TRUE;
! 2515: /* For the time being, we assume the heap generally grows up */
! 2516: GC_vd_base = GC_heap_sects[0].hs_start;
! 2517: if (GC_vd_base == 0) {
! 2518: ABORT("Bad initial heap segment");
! 2519: }
! 2520: if (PCR_VD_Start(HBLKSIZE, GC_vd_base, NPAGES*HBLKSIZE)
! 2521: != PCR_ERes_okay) {
! 2522: ABORT("dirty bit initialization failed");
! 2523: }
! 2524: }
! 2525:
! 2526: void GC_read_dirty()
! 2527: {
! 2528: /* lazily enable dirty bits on newly added heap sects */
! 2529: {
! 2530: static int onhs = 0;
! 2531: int nhs = GC_n_heap_sects;
! 2532: for( ; onhs < nhs; onhs++ ) {
! 2533: PCR_VD_WriteProtectEnable(
! 2534: GC_heap_sects[onhs].hs_start,
! 2535: GC_heap_sects[onhs].hs_bytes );
! 2536: }
! 2537: }
! 2538:
! 2539:
! 2540: if (PCR_VD_Clear(GC_vd_base, NPAGES*HBLKSIZE, GC_grungy_bits)
! 2541: != PCR_ERes_okay) {
! 2542: ABORT("dirty bit read failed");
! 2543: }
! 2544: }
! 2545:
! 2546: GC_bool GC_page_was_dirty(h)
! 2547: struct hblk *h;
! 2548: {
! 2549: if((ptr_t)h < GC_vd_base || (ptr_t)h >= GC_vd_base + NPAGES*HBLKSIZE) {
! 2550: return(TRUE);
! 2551: }
! 2552: return(GC_grungy_bits[h - (struct hblk *)GC_vd_base] & PCR_VD_DB_dirtyBit);
! 2553: }
! 2554:
! 2555: /*ARGSUSED*/
! 2556: void GC_write_hint(h)
! 2557: struct hblk *h;
! 2558: {
! 2559: PCR_VD_WriteProtectDisable(h, HBLKSIZE);
! 2560: PCR_VD_WriteProtectEnable(h, HBLKSIZE);
! 2561: }
! 2562:
! 2563: # endif /* PCR_VDB */
! 2564:
! 2565: /*
! 2566: * Call stack save code for debugging.
! 2567: * Should probably be in mach_dep.c, but that requires reorganization.
! 2568: */
! 2569: #if defined(SPARC) && !defined(LINUX)
! 2570: # if defined(SUNOS4)
! 2571: # include <machine/frame.h>
! 2572: # else
! 2573: # if defined (DRSNX)
! 2574: # include <sys/sparc/frame.h>
! 2575: # else
! 2576: # if defined(OPENBSD)
! 2577: # include <frame.h>
! 2578: # else
! 2579: # include <sys/frame.h>
! 2580: # endif
! 2581: # endif
! 2582: # endif
! 2583: # if NARGS > 6
! 2584: --> We only know how to to get the first 6 arguments
! 2585: # endif
! 2586:
! 2587: #ifdef SAVE_CALL_CHAIN
! 2588: /* Fill in the pc and argument information for up to NFRAMES of my */
! 2589: /* callers. Ignore my frame and my callers frame. */
! 2590:
! 2591: #ifdef OPENBSD
! 2592: # define FR_SAVFP fr_fp
! 2593: # define FR_SAVPC fr_pc
! 2594: #else
! 2595: # define FR_SAVFP fr_savfp
! 2596: # define FR_SAVPC fr_savpc
! 2597: #endif
! 2598:
! 2599: void GC_save_callers (info)
! 2600: struct callinfo info[NFRAMES];
! 2601: {
! 2602: struct frame *frame;
! 2603: struct frame *fp;
! 2604: int nframes = 0;
! 2605: word GC_save_regs_in_stack();
! 2606:
! 2607: frame = (struct frame *) GC_save_regs_in_stack ();
! 2608:
! 2609: for (fp = frame -> FR_SAVFP; fp != 0 && nframes < NFRAMES;
! 2610: fp = fp -> FR_SAVFP, nframes++) {
! 2611: register int i;
! 2612:
! 2613: info[nframes].ci_pc = fp->FR_SAVPC;
! 2614: for (i = 0; i < NARGS; i++) {
! 2615: info[nframes].ci_arg[i] = ~(fp->fr_arg[i]);
! 2616: }
! 2617: }
! 2618: if (nframes < NFRAMES) info[nframes].ci_pc = 0;
! 2619: }
! 2620:
! 2621: #endif /* SAVE_CALL_CHAIN */
! 2622: #endif /* SPARC */
! 2623:
! 2624:
! 2625:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>