%% $OpenXM: OpenXM/doc/install.oxweave,v 1.19 2000/01/27 01:13:17 takayama Exp $ OpenXM/doc/install.oxweave /*&C OpenXM URL : http://www.math.kobe-u.ac.jp/OpenXM Consult firstly the ERRATA section for your release on this web cite for troubles. OpenXM package : Getting started. */ /*&jp ★ OpenXM パッケージの利用方法 この節では, OpenXM package binary distribution のインストール法を説明します. インストールに必要なシステムの仕様については, 動作環境を御覧ください. */ /*&eg ***** HOW TO USE OpenXM PACKAGE? In this section, we will explain how to install OpenXM package binary distribution. As to the required environment, see the section "System Requirement" */ /*&jp (1) Tar ボールより次のようにしてディレクトリ OpenXM を取り出します. OpenXM はどこにおいてもかまいません. ルートになってインストール する必要もありません. できれば, /usr/local/OpenXM においてほしいと思います. */ /*&eg (1) Extract the directory OpenXM from the tar ball. You can put the directory OpenXM at any place in the file system. You do not need to be a root to install it. We are happy if you put OpenXM at /usr/local/OpenXM */ /*&C tar xzvf OpenXM-binary-OPERATING_SYSTEM_CPU_TYPE.tgz */ /*&jp 以下 (1) で生成されたディレクトリ OpenXM の絶対パスを /xxx/yyy/OpenXM と書きます. */ /*&eg In the sequel, we will denote the absolute path of the directory OpenXM by /xxx/yyy/OpenXM. */ /*&jp (2) 次のように入力して OpenXM/rc/dot.cshrc, OpenXM/rc/dot.bashrc, OpenXM/rc/openxm ファイルを自動生成します. これらのファイルには, OpenXM/bin のファイルを実行するための 環境変数が定義されています. */ /*&eg (2) Generate OpenXM/rc/dot.cshrc, OpenXM/rc/dot.bashrc and OpenXM/rc/openxm by the following command. Environmental variables to execute commands in OpenXM/bin are defined in these files. */ /*&C cd /xxx/yyy/OpenXM/rc make */ /*&jp (3) csh を利用してる場合, 次の行を ~/.cshrc の最後に加えます. */ /*&eg (3) Append the following line to the end of ~/.cshrc when you are using csh as your shell. */ /*&C source /xxx/yyy/OpenXM/rc/dot.cshrc */ /*&jp (3') bash を利用してる場合, 次の行を ~/.bashrc の最後に加えます. */ /*&eg (3') Append the following line to the end of ~/.bashrc when you are using bash as your shell. */ /*&C source /xxx/yyy/OpenXM/rc/dot.bashrc */ /*&jp (3) または (3') を終了したら, いったん logout して login しなおすか または, source コマンドで, dot.bashrc または dot.csh を読み込んで下さい. (3) または (3') をやらないという選択もあります. この場合, シェルスクリプト OpenXM/rc/openxm を コマンドサーチパスに移し, OpenXM/bin 以下の全てのコマンドの実行は, openxm コマンド名 という形で呼び出します. たとえば, openxm asir とか openxm sm1 という形でよびだします. */ /*&eg After finishing the step (3) or (3'), logout and login again, or read dot.bashrc or dot.cshrc file by the source command. You may skip the step (3) or (3'). In this case, move the shell script OpenXM/rc/openxm to your command search path. To execute commands in OpenXM/bin, type in openxm command-name For example, "openxm asir" starts asir and "openx sm1" starts sm1 with a proper setting of environmental variables. */ //&C //&jp (4) asir の利用には key が必要です. //&eg (4) You need a key to use asir. //&C /*&jp asir の起動時のメッセージまたは OpenXM/lib/asir/asir_key を 参照して, key を取得して下さい (数秒しかかかりません). */ /*&eg Please get the key by following the instruction from asir itself or that in OpenXM/lib/asir/asir_key (it takes only a few seconds to get the key). */ /*&C ***** QUALITY: the following modules and functions have still experimental qualities: OpenXM/bin/k0, OpenXM/bin/d0 OpenXM/bin/ox_math, OpenXM/bin/math2ox OpenXM/lib/java-support/ * Asir client functions: m_* (Mathematica) , om_* (OpenMath) OpenXM/bin/sm1, ox_sm1 on Linux libc6. */ /*&C */ /*&jp ★ Java に関する注意: 注意 1. OpenMath 用の OMproxy には現在のところ, jdk が必要です. たとえば bash を利用している場合, .bashrc で PATH=/usr/local/jdk1.1.8/bin:$PATH export PATH などとして, jdk の java, javac をサーチパスの先のほうへもっていくようにして ください. csh を利用している場合, .cshrc で set path=(/usr/local/jdk1.1.8/bin $path) として, jdk の java, javac をサーチパスにいれます. 注意: なお, Kaffe 1.0.b4 の java は, class BigInteger に method toByteArray が含まれてないため, OpenMath モジュールでは使用できません. */ /*&eg ***** JAVA In order to use OMproxy, asir client om_*, you need to install JDK. The bin dir of the JDK must be in yur search path. For example, you need to add the following line to your .chsrc when your shell is csh set path=(/usr/local/jdk1.1.8/bin $path) Bash users put the following line to .bashrc PATH=/usr/local/jdk1.1.8/bin:$PATH export PATH Remark: The Java interpreter of Kaffe 1.0.b4 does not contain the method toByteArray in the class BigInteger. So, it cannot be used for the OpenMath module. */ /*&C */ /*&jp ★ 動作環境 */ /*&eg ***** SYSTEM REQUIREMENTS */ /*&C OS: FreeBSD 3.3 (Intel CPU), Linux systems (Intel CPU): Most Linux with libc5 and with libc6 (glibc 2.x). X window system is required. Most part of the OpenXM package may work on other versions of FreeBSD 3.x and Linux, but we have not yet tested. */ /*&jp 次の modules は, OS の標準 distribution 以外に, さらに下に記したソフトを 必要とします. */ /*&eg The following modules require the listed softwares other than the standard OS package. */ /*&C (1) OpenXM/bin/ox_math : Mathematica Version 3.x or 4.x (Mathematica server) at /usr/local/Mathematica OpenXM/bin/math2ox [ see http://www.wolfram.com ] Asir client functions m_* (2) OpenXM/lib/java-support : JDK at /usr/local/jdk?? [ see the section on JAVA] Asir client functions om_* sm1 client functions om_* (3) PHC pack (OpenXM/bin/phc) and asir client functions phc_* run only on linux (glib5). If you install the linux emulation^{note 1} on Free BSD, they run on FreeBSD, too. Add linux_enable="YES" in /etc/rc.conf You need the following packages: pkg_info | grep linu linux_base-5.2 The base set of packages needed in Linux mode linux_devtools-5.2 Packages needed for doing development in Linux mode */ /*&jp 日本語版の注意. 注意 1. asir で日本語のヘルプを利用するには, PAGER=jless export PAGER などで, 日本語を扱える PAGER を指定する必要があるかもしれません. */ /*&eg The installation is completed. */ /*&jp 以上. */ /*&jp ★ 文書 OpenXM パッケージでもっとも充実しているクライアントは, asir です. asir のつかいかたは OpenXM/doc/asir2000/man-jp.dvi または OpenXM/doc/asir2000/html-jp の HTML ファイルを見て下さい. asir 用 OpenXM クライアントライブラリのつかい方は, OpenXM/doc/asir-contrib/cman-jp.dvi を見て下さい. dvi の付くファイルは xdvi で見ることができます. OpenXM の設計の概要については, OpenXM/doc/issac2000/issac2000.ps を見て下さい. ps の付くファイルは, ghostview で見ることができます. */ /*&eg ***** DOCUMENTS The best OpenXM client in the OpenXM package is now asir. Documents on asir are OpenXM/doc/asir2000/man-eg.dvi OpenXM/doc/asir2000/html-eg (HTML) The file OpenXM/doc/asir-contrib/cman-eg.dvi is a document on OpenXM client libraries for asir. The design outline is described in OpenXM/doc/issac2000/issac2000.ps Dvi files can be previewed by xdvi and ps files can be previewed by ghostview. */ /*&eg ***** A QUICK TOUR OF OPENXM BY ASIR */ /*&jp ★ ASIR による使用例 asir を動作させるには, key が必要です. OpenXM/lib/asir/asir_key のコメントまたは起動時のメッセージをみて, key を E-mail でとりよせて下さい. */ /*&C ---------------- Call ox_sm1 from asir. bash-2.03$ asir This is Risa/Asir, Version 20000120. Copyright (C) FUJITSU LABORATORIES LIMITED. 1994-1999. All rights reserved. xm Version 20000116. ox_help(0); ox_help("keyword"); for help message [269] sm1_genericAnn([x^3-y^2,[s,x,y]]); /* The annihilating ideal of (x^3-y^2)^s */ [-2*y*dx-3*x^2*dy,2*x*dx+3*y*dy-6*s] --------------- Call gnuplot from asir. bash-2.03$ asir This is Risa/Asir, Version 20000120. Copyright (C) FUJITSU LABORATORIES LIMITED. 1994-1999. All rights reserved. xm Version 20000116. ox_help(0); ox_help("keyword"); for help message [269] gnuplot("plot sin(x);"); 0 [270] */ /*&jp ★ sm1 クライアントの利用例 */ /*&eg ****** Example of the use of sm1 client */ /*&C -------------------------------------- call ox_asir from sm1 sm1 (oxasir.sm1) run ; [(x^20-y^20) (x,y)] fctr pmat ; factorize x^20-y^20 by call ox_asir */ /*&jp [著作権表示] OpenXM/Copyright を御覧ください. */ /*&eg [COPYRIGHT] See OpenXM/Copyright. */ /*&eg ***** TO COMPILE FROM A SOURCE ***** */ /*&jp ★ OpenXM パッケージの Make 法 FreeBSD 2.2.8, FreeBSD 3.3, Linux で動作するものと期待してます. Linux glib6 では, いまのところ, /usr/include/features.h で #define __FAVOR_BSD 1 してコンパイルする必要があります. (setjmp と sigsetjmp の問題, dirty trick) OpenXM, OpenXM_contrib, OpenXM_contrib2 が必要です. cvs コミッタの場合次のようにしてソースをとりよせます. */ /*&eg * How to make OpenXM package? We have tested the OpenXM package on FreeBSD 2.2.8, FreeBSD 3.3, Linux. On Linux glib6, you need to define #define __FAVOR_BSD 1 in /usr/include/features.h (setjmp vs sigsetjmp) Do you have directories OpenXM, OpenXM_contrib, OpenXM_contrib2? If you are a CVS committer, then you can get all sources as follows: */ //&C rcvs checkout OpenXM OpenXM_contrib OpenXM_contrib2 //&C //&jp これらがそろっていたらあとは次のように入力するだけです. //&eg Check that you have these directories, then just type in the following commands /*&C cd OpenXM/src make configure make make install */ /*&jp なお, OpenXM/src/ox_math のコンパイルおよび利用には Mathematica が, OpenXM/src/OpenMath のコンパイルおよび利用には には, jdk (java 環境) が必要です. Documents を生成するには, tex, ptex (ascii 日本語 tex), dvips, texinfo, texi2html, nkf, が必要です. 詳しくは Makefiles を見て下さい. Document は, binary distribution の OpenXM/doc, OpenXM/lib より得るのが簡単です. */ /*&eg In order to use and compile OpenXM/src/ox_math, you need Mathematica. In order to use and compile OpenXM/src/OpenMath, you need jdk (java environment). In order to generate the full documentation including Japanese documents, you need tex, ptex (ASCII Inc. Japanese tex), dvips, texinfo, texi2html, nkf. See each Makefile. The generated documents are in OpenXM/doc and OpenXM/lib in the binary distribution. If you do not like to install Japanese environment such as ptex, type in R for the tex error prompt ? or prepare empty shell scripts ptex and nkf. */ /*&C */ /*&jp OpenXM_contrib2/asir2000 の配布を受けてない場合 (ソースライセンスを 富士通より受ける必要があります), OpenXM/src/Makefile の各モジュール名 たとえば make all-kan96xx などと各モジュール名を指定してコンパイルして下さい. */ /*&eg If you cannot get a source liscence of OpenXM_contrib2/asir2000 from Fujitsu labs, compile each modules independently, e.g., make all-kan96xx */ /*&jp [OpenXM 下のファイルの構成メモ] lib/asir には, asir のライブラリ, ox_asir 本体 cd OpenXM/src/kxx ; make install-for-debug した場合, lib/sm1 は src/SSkan/Doc への symbolic link であり, sm1 のライブラリファイルが格納されています. lib/sm1/bin には, binaryfiles sm1, ox_sm1, ox, ox_log, ox_sm1_* へのシンボリックリンクが格納されます. このシンボリックリンクは src/kxx で make install-for-debug を実行することにより 作成されます. sm1 が ox_asir を利用するのに必要なファイル. lib/asir/ox_asir, lib/sm1/bin/ox, lib/sm1/bin/ox_log (src/kxx/ox, src/kxx/ox_log) lib/sm1/ox.sm1, lib/sm1/oxasir.sm1 asir が ox_sm1_forAsir を利用するのに必要なファイル: lib/asir/ox_launch lib/sm1/bin/ox_sm1_forAsir (ox_sm1 へのリンク) lib/asir/xm lib/sm1/ 以下の *.sm1 なるすべての ライブラリファイル. callsm1.sm1 callsm1b.sm1 (ox_sm1_forAsir の定義ファイル, src/kxx/oxserver00.c ox_sm1 が ox_sm1_forAsir という名前で呼ばれるとこれらのファイルをロード.) asir が ox_sm1_gnuplot を利用するのに必要なファイル: lib/asir/ox_launch lib/sm1/bin/ox_sm1_gnuplot (ox_sm1 へのリンク, ox_sm1_gnuplot は fork して gnuplot4ox を実行します.) lib/asir/xm lib/sm1/callsm1.sm1, lib/sm1/gnuplot.sm1 (ox_sm1_gnuplot の定義ファイル, src/kxx/oxserver00.c ox_sm1 が ox_sm1_gnuplot という名前で呼ばれるとこれらのファイルをロード.) bin/gnuplot4ox, bin/gnuplot_x11 (gnuplot 本体, src/gnuplot*) ---------------------------------------- [開発者用メモ] << sm1, ox_sm1, ox, oxlog の debug >> binary file は各 directory の make install により OpenXM/bin にコピーされますが, debug 用にいちいちコピーするのは面倒なので, OpenXM/src/kan96xx で make install-for-debug OpenXM/src/kxx で make install-for-debug を実行すると, OpenXM/bin/sm1, ox, ox_sm1, oxlog より, OpenXM/src/kan96xx/Kan/sm1 OpenXM/src/kxx/ox, OpenXM/src/kxx/ox_sm1, OpenXM/src/kxx/oxlog へのシンボリックリンクが作成されます. [CVSコミッタ用メモ] << OpenXM ディレクトリ配布版の作成方法 >> rcvs export -rHEAD OpenXM rcvs export -rHEAD OpenXM_contrib rcvs export -rHEAD OpenXM_contrib2 して, OpenXM, OpenXM_contrib, OpenXM_contrib2 全体を tar+gzip. */ /*&C */ /*&jp ★ Solaris に関する注意. Solaris ではまだ問題が山積してます. Solaris での make の問題点については, OpenXM/doc/OpenXM-FAQ-jp.txt を見てください. Solaris でコンパイルするには, /usr/ccs/bin をサーチパスの最初へもっていって おきます. */ /*&eg ***** COMPILE ON SOLARIS There are a lot of troubles on Solaris for now. At least, /usr/ccs/bin must be at the top of the command search path to compile on Solaris. */ /*&C */