%% $OpenXM: OpenXM/doc/install.oxweave,v 1.43 2001/12/20 04:52:07 takayama Exp $ OpenXM/doc/install.oxweave /*&C OpenXM URL : http://www.math.kobe-u.ac.jp/OpenXM http://www.openxm.org Consult firstly the ERRATA section for your release on this web cite for troubles. OpenXM package : Getting started. This document is for OpenXM version 1.1.3. (Draft) ----------- An instruction for a quick installation ----------------- (cd OpenXM/src ; make configure ; make install) You will get binaries, libraries, and documents under OpenXM/bin, OpenXM/lib, OpenXM/doc (cd OpenXM/rc ; make install) Shell scripts to start "asir", "sm1", ... will be copied to /usr/local/bin *********** If you need only asir and kan/(sm1, k0), (cd OpenXM/src ; make install-kan-ox ; make install-asir-contrib) You will get only asir (OpenXM version) and kan/sm1. (cd OpenXM/rc ; make install) ------------------------------------------------------------------- */ /*&jp ★ OpenXM GENERIC パッケージの利用方法 この節では, OpenXM package binary distribution のインストール法を説明します. ソースからインストールする場合は ★ OpenXM パッケージの Make 法 を御覧下さい. RPM, Debian などのパッケージでインストールする場合は Web ページの説明どうりにパッケージをインストールするだけで 設定が終了します. インストールに必要なシステムの仕様については, 動作環境を御覧ください. */ /*&eg ***** HOW TO INSTALL OpenXM GENERIC PACKAGE? In this section, we will explain how to install OpenXM package binary distribution. If you build from the source, see the section * How to make OpenXM package? If you install openxm by using RPM or Debian package, install the system following the instruction given on our web page. As to the required environment, see the section "System Requirement" */ /*&jp (1) Tar ボールより次のようにしてディレクトリ OpenXM を取り出します. OpenXM はどこにおいてもかまいません. ルートになってインストール する必要もありません. できれば, /usr/local/OpenXM においてほしいと思います. */ /*&eg (1) Extract the directory OpenXM from the tar ball. You can put the directory OpenXM at any place in the file system. You do not need to be a root to install it. We are happy if you put OpenXM at /usr/local/OpenXM */ /*&C tar xzvf OpenXM-shared.tgz tar xzvf OpenXM-binary-OPERATING_SYSTEM_CPU_TYPE.tgz */ /*&jp 以下 (1) で生成されたディレクトリ OpenXM の絶対パスを /xxx/yyy/OpenXM と書きます. */ /*&eg In the sequel, we will denote the absolute path of the directory OpenXM by /xxx/yyy/OpenXM. */ /*&jp (2) OpenXM/rc/dot.cshrc, OpenXM/rc/dot.bashrc, OpenXM/rc/openxm, OpenXM/rc/asir, OpenXM/rc/oxmath, 等の ファイルを自動生成します. openxm, asir, oxmath などは OpenXM クライアントを起動するための シエルスクリプトです. これらを /usr/local/bin にインストールするには 次のように入力します. */ /*&eg (2) Generate OpenXM/rc/dot.cshrc, OpenXM/rc/dot.bashrc and OpenXM/rc/openxm, OpenXM/rc/asir, OpenXM/rc/oxmath, ... The files openxm, asir, oxmath are shell scripts to invoke OpenXM clients. If you want to install these shell scripts to /usr/local/bin, type in as follows. */ /*&C cd /xxx/yyy/OpenXM/rc make install */ /*&jp /usr/local/bin でなく, home directory の bin にインストールしたい ときは, 次のように入力してください. */ /*&eg If you want to install them under the bin of your home directory, type in as follows. */ /*&C cd /xxx/yyy/OpenXM/rc make install PREFIX=$HOME/bin */ /*&C [Note] If you are Solaris user, you might have to type in like /usr/ccs/bin/make install PREFIX=$HOME/bin */ /*&jp OpenXM/bin の下のファイルを直接実行したい場合は, 以下の設定が必要です. OpenXM clients を実行するだけの場合は, (3), (3') は skip してください. (3) csh を利用してる場合, 次の行を ~/.cshrc の最後に加えます. */ /*&eg If you want to execute binaries under OpenXM/bin, you need to perform (3) and (3'). If you use only OpenXM clients, skip (3) and (3'). (3) Append the following line to the end of ~/.cshrc when you are using csh as your shell. */ /*&C source /xxx/yyy/OpenXM/rc/dot.cshrc */ /*&jp (3') bash を利用してる場合, 次の行それぞれを ~/.bashrc および ~/.bash_profile の最後に加えます. */ /*&eg (3') Append the following lines to the end of ~/.bashrc and ~/.bash_profile respectively when you are using bash as your shell. */ /*&C source /xxx/yyy/OpenXM/rc/dot.bashrc (.bashrc) source ~/.bashrc (.bash_profile) */ /*&jp (3) または (3') を終了したら, いったん logout して login しなおすか または, source コマンドで, dot.bashrc または dot.csh を読み込んで下さい. */ /*&eg After finishing the step (3) or (3'), logout and login again, or read dot.bashrc or dot.cshrc file by the source command. */ /*&C FAQ */ /*&jp Q. OpenXM の asir OpenXM client を icon でスタートするには? A. 次の行を, .Xdefaults または, xrdb で読み込むファイルに書いておきます. */ /*&eg Q. How to start asir OpenXM clients in the iconic mode? A. Add the following line to .Xdefaults or a file you read by xrdb. */ /*&C ox_xterm*iconic: on */ /*&C ------------------------------------------------------------- */ /*&jp ★ OpenXM FreeBSD binary パッケージのインストール方法 openxm-version.tgz を ftp サイトより copy して, root になって, pkg_add openxm-version.tgz OpenXM は /usr/local/OpenXM にインストールされます. ここで version は OpenXM の version 番号で, たとえば, 2000, 3/20(Mon) 版は 1.1.2 pkg_add に失敗した場合は, /var のサイズを大きくしてやりなおして みて下さい. java および linux emulation が実行に必要です. java が, サーチパスのなかにある必要がありますので, たとえば, set path=(/usr/local/jdk1.1.8 $path) rehash してから, pkg_add して下さい. インストール終了後のメッセージにしたがい, 必要な設定を おこなって下さい. jdk は /usr/ports/lang/jdk よりインストールできます. Linux emulation を有効にするには, /etc/rc.conf に linux_enable="YES" と書き, /usr/ports/emulators/linux_base を用いて, linux 用の共有ライブラリ等を インストールしておきます. (FreeBSD 3.x, 4.x) /usr/local にインストールしなかった場合は, (2) を実行して下さい. */ /*&eg ***** HOW TO INSTALL OpenXM FreeBSD binary package Copy openxm-version.tgz from our ftp cite. Become the super user and type pkg_add openxm-version.tgz OpenXM will be installed to /usr/local/OpenXM Here, version is the version number of OpenXM. For example, the version number of the OpenXM of May 20 (Mon), 2000 is 1.1.2 If you fail "pkd_add", increase the size of /var java and linux emulation are required to run OpenXM packages. Java needs to be in the search path. So, for example, execute pkg_add after set path=(/usr/local/jdk1.1.8 $path) rehash Following the message of pkg_add after the installation, set path. jdk can be installed by /usr/ports/lang/jdk. Add the line linux_enable="YES" to /etc/rc.conf and install shared libraries for linux by /usr/ports/emulators/linux_base. Then, you can emulate linux. If you do not install under /usr/local, goto (2). */ /*&jp ★ OpenXM Redhat Package manager (Linux) binary パッケージのインストール方法 openxm-shared-version-suffix.noarch.rpm openxm-binary-version-suffix.i386.rpm を ftp サイトより copy して, root になって, rpm -i openxm-shared-version-suffix.noarch.rpm rpm -i openxm-binary-version-suffix.i386.rpm OpenXM は /usr/local/OpenXM にインストールされます. ここで version は OpenXM の version 番号で, たとえば, 2000, 3/20(Mon) 版は 1.1.2 suffix は, RPM 版の minor version number. /usr/local の下へインストールしなかった場合は, (2) を実行して下さい. libgd のインストールが必要な場合もあります. libgd がインストールしてない場合, http://www.redhat.com/downloads へアクセスし, libgd をインストール して下さい. */ /*&eg ***** HOW TO INSTALL OpenXM by the redhat Package manager (Linux) Copy openxm-shared-version-suffix.noarch.rpm openxm-binary-version-suffix.i386.rpm from our ftp cite. Become the super user and type rpm -i openxm-shared-version-suffix.noarch.rpm rpm -i openxm-binary-version-suffix.i386.rpm OpenXM will be installed to /usr/local/OpenXM Here, version is the version number of OpenXM. For example, the version number of the OpenXM of May 20 (Mon), 2000 is 1.1.2 suffix is the minor version number of the package. If you do not install under /usr/local, goto (2). You might need to install libgd. If it is not installed in your system, access to http://www.redhat.com/downloads and get libgd. */ /*&C --------------------------------------------------------- */ /*&C ***** OpenXM client programs under OpenXM/bin or /usr/local/bin: asir oxmath openxm sm1 ***** OpenXM server programs: OpenXM/bin/ox_asir OpenXM/bin/ox_sm1 OpenXM/bin/ox_math OpenXM/lib/sm1/bin/ox_sm1_gnuplot OpenXM/lib/sm1/bin/ox_sm1_phc OpenXM/lib/sm1/bin/ox_sm1_tigers OpenXM/lib/java-support/OMproxy.class ***** QUALITY: Experimental: OpenXM/bin/k0, OpenXM/bin/d0 Asir client functions: m_* (Mathematica) , om_* (OpenMath) OpenXM/lib/java-support/ * 70% OpenXM/bin/ox_math, OpenXM/bin/math2ox OpenXM/bin/sm1, ox_sm1 on Linux libc6. **** OpenXM server and client programs (under development) included only in the source distribution OpenXM/src/Macaulay2 ( M2 server and client ) OpenXM/src/ruby ( Ruby client) **** Utilities OpenXM/doc/oxlib ( how to link oxservers as libraries ) */ /*&C */ /*&jp ★ Java に関する注意: 注意 1. OpenMath 用の OMproxy には現在のところ, jdk が必要です. たとえば bash を利用している場合, .bashrc で PATH=/usr/local/jdk1.1.8/bin:$PATH export PATH などとして, jdk の java, javac をサーチパスの先のほうへもっていくようにして ください. csh を利用している場合, .cshrc で set path=(/usr/local/jdk1.1.8/bin $path) として, jdk の java, javac をサーチパスにいれます. jdk の入手先: FreeBSD --- /usr/ports/java/jdk を見てください. Linux --- http://java.sun.com/products/jdk/1.2/ja http://java.sun.com/j2se/1.3/ja 注意: なお, Kaffe 1.0.b4 の java は, class BigInteger に method toByteArray が含まれてないため, OpenMath モジュールでは使用できません. */ /*&eg ***** JAVA In order to use OMproxy, asir client om_*, you need to install JDK. The bin dir of the JDK must be in yur search path. For example, you need to add the following line to your .chsrc when your shell is csh set path=(/usr/local/jdk1.1.8/bin $path) Bash users put the following line to .bashrc PATH=/usr/local/jdk1.1.8/bin:$PATH export PATH Where can I get jdk? : FreeBSD --- see /usr/ports/java/jdk Linux --- http://java.sun.com/products/jdk/1.2/ja http://java.sun.com/j2se/1.3/ja Remark: The Java interpreter of Kaffe 1.0.b4 does not contain the method toByteArray in the class BigInteger. So, it cannot be used for the OpenMath module. */ /*&C -------------------------------------------------------- */ /*&jp ★ 動作環境 */ /*&eg ***** SYSTEM REQUIREMENTS */ /*&C OS: FreeBSD 3.3, 3.4, 4.x (Intel CPU), Linux systems (Intel CPU): Most Linux with libc5 and with libc6 (glibc 2.x). X window system is required. Most part of the OpenXM package may work on other versions of FreeBSD 3.x and Linux, but we have not yet tested. */ /*&jp 次の modules は, OS の標準 distribution 以外に, さらに下に記したソフトを 必要とします. */ /*&eg The following modules require the listed softwares other than the standard OS package. */ /*&C (1) OpenXM/bin/oxmath : Mathematica Version 3.x or 4.x (Mathematica server) at /usr/local/Mathematica OpenXM/bin/math2ox [ see http://www.wolfram.com ] Asir client functions m_* (2) OpenXM/lib/java-support : JDK at /usr/local/jdk?? [ see the section on JAVA] Asir client functions om_* sm1 client functions om_* (3) PHC pack (OpenXM/bin/phc) and asir client functions phc_* run only on linux (glib5). If you install the linux emulation^{note 1} on Free BSD, they run on FreeBSD, too. Add linux_enable="YES" in /etc/rc.conf You need the following packages: pkg_info | grep linu linux_base-5.2 The base set of packages needed in Linux mode linux_devtools-5.2 Packages needed for doing development in Linux mode */ /*&jp 日本語版の注意. 注意 1. asir で日本語のヘルプを利用するには, PAGER=jless export PAGER などで, 日本語を扱える PAGER を指定する必要があるかもしれません. */ /*&eg The installation is completed. */ /*&jp 以上. */ /*&C ----------------------------------------------------- */ /*&jp ★ 文書 OpenXM パッケージでもっとも充実しているクライアントは, asir です. asir のつかいかたは OpenXM/doc/asir2000/man-jp.dvi または OpenXM/doc/asir2000/html-jp の HTML ファイルを見て下さい. asir 用 OpenXM クライアントライブラリのつかい方は, OpenXM/doc/asir-contrib/cman-jp.dvi を見て下さい. dvi の付くファイルは xdvi で見ることができます. OpenXM の設計の概要については, OpenXM/doc/issac2000/issac2000.ps を見て下さい. ps の付くファイルは, ghostview で見ることができます. Mathematica client については, OpenXM/doc/ox_math を御覧ください. sm1 client については, OpenXM/doc/kan96xx を御覧ください. asir は, 多項式処理用のライブラリとしてリンクできます. これについては, OpenXM/doc/oxlib を御覧ください. OpenXM 対応の, サーバ を作成するには, OpenXM/src/ox_toolkit が参考になるかもしれません. Java のクラスについては OpenXM/src/OpenMath が参考になるかもしれません. */ /*&eg ***** DOCUMENTS The best OpenXM client in the OpenXM package is now asir. Documents on asir are OpenXM/doc/asir2000/man-eg.dvi OpenXM/doc/asir2000/html-eg (HTML) The file OpenXM/doc/asir-contrib/cman-eg.dvi is a document on OpenXM client libraries for asir. The design outline is described in OpenXM/doc/issac2000/issac2000.ps Dvi files can be previewed by xdvi and ps files can be previewed by ghostview. As to Mathematica client, see OpenXM/doc/ox_math. As to sm1 client, see OpenXM/doc/kan96xx. The asir can be used as a C library for polynomial manupulation. See OpenXM/doc/oxlib. If you are interested in writing a server for OpenXM, please refer to OpenXM/src/ox_toolkit and OpenXM/src/OpenMath. */ /*&eg ***** A QUICK TOUR OF OPENXM BY ASIR */ /*&jp ★ ASIR による使用例 asir を動作させるには, key が必要です. OpenXM/lib/asir/asir_key のコメントまたは起動時のメッセージをみて, key を E-mail でとりよせて下さい. */ /*&C ---------------- Call ox_sm1 from asir. bash-2.03$ asir This is Risa/Asir, Version 20000120. Copyright (C) FUJITSU LABORATORIES LIMITED. 1994-1999. All rights reserved. xm Version 20000116. ox_help(0); ox_help("keyword"); for help message [269] sm1_genericAnn([x^3-y^2,[s,x,y]]); /* The annihilating ideal of (x^3-y^2)^s */ [-2*y*dx-3*x^2*dy,2*x*dx+3*y*dy-6*s] --------------- Call gnuplot from asir. bash-2.03$ asir This is Risa/Asir, Version 20000120. Copyright (C) FUJITSU LABORATORIES LIMITED. 1994-1999. All rights reserved. xm Version 20000116. ox_help(0); ox_help("keyword"); for help message [269] gnuplot("plot sin(x);"); 0 [270] */ /*&jp ★ sm1 クライアントの利用例 */ /*&eg ****** Example of the use of sm1 client */ /*&C -------------------------------------- call ox_asir from sm1 sm1 (oxasir.sm1) run ; [(x^20-y^20) (x,y)] fctr pmat ; factorize x^20-y^20 by call ox_asir */ /*&jp [著作権表示] OpenXM/Copyright を御覧ください. */ /*&eg [COPYRIGHT] See OpenXM/Copyright. */ //&C //&C ---------------------------------------------- //&C /*&eg ***** TO COMPILE FROM A SOURCE ***** */ /*&jp ★ OpenXM パッケージの Make 法 FreeBSD 3.x, FreeBSD 4.x, Linux で動作するものと期待してます. (Linux glib6 では, いまのところ, /usr/include/features.h で #define __FAVOR_BSD 1 してコンパイルする必要がありしたが, 一部のソースを -D_BSD_SOURCE option をつけて gcc でコンパイルするように変えてます (setjmp と sigsetjmp の問題, dirty trick) 現在では問題ありません. ) OpenXM, OpenXM_contrib, OpenXM_contrib2 が必要です. ftp.math.kobe-u.ac.jp/OpenXM/1.1.3 より openxm-1.1.3.tar.gz を get して展開して下さい. tar xzvf openxm-1.1.3.tar.gz openxm-1.1.3/OpenXM openxm-1.1.3/OpenXM_contrib openxm-1.1.3/OpenXM_contrib2 が生成されます. cvs コミッタの場合次のようにしてソースをとりよせます. */ /*&eg * How to make OpenXM package? We have tested the OpenXM package on FreeBSD 3.x, FreeBSD 4.x, Linux. (On Linux glib6, we needed to define #define __FAVOR_BSD 1 in /usr/include/features.h, but now we are compiling some sources with -D_BSD_SOURCE (setjmp vs sigsetjmp). So, you do not need to make this change.) Do you have directories OpenXM, OpenXM_contrib, OpenXM_contrib2? get openxm-1.1.3.tar.gz from ftp.math.kobe-u.ac.jp/OpenXM/1.1.3 Expand it by tar xzvf openxm-1.1.3.tar.gz Then, you will get openxm-1.1.3/OpenXM openxm-1.1.3/OpenXM_contrib openxm-1.1.3/OpenXM_contrib2 If you are a CVS committer, then you can get all sources as follows: */ //&C rcvs checkout OpenXM OpenXM_contrib OpenXM_contrib2 //&C //&jp これらがそろっていたらあとは次のように入力するだけです. //&eg Check that you have these directories, then just type in the following commands /*&C cd OpenXM/src make configure make make install */ /*&jp なお, OpenXM/src/ox_math のコンパイルおよび利用には Mathematica が, OpenXM/src/OpenMath のコンパイルおよび利用には には, jdk (java 環境) が必要です. Documents を生成するには, tex, ptex (ascii 日本語 tex), dvips, texinfo, texi2html, nkf, jlatex2html が必要です. 詳しくは Makefiles を見て下さい. Document は, binary distribution の OpenXM/doc, OpenXM/lib より得るのが簡単です. */ /*&eg In order to use and compile OpenXM/src/ox_math, you need Mathematica. In order to use and compile OpenXM/src/OpenMath, you need jdk (java environment). In order to generate the full documentation including Japanese documents, you need tex, ptex (ASCII Inc. Japanese tex), dvips, texinfo, texi2html, nkf, jlatex2html. See each Makefile. The generated documents are in OpenXM/doc and OpenXM/lib in the binary distribution. If you do not like to install Japanese environment such as ptex, type in R for the tex error prompt ? or prepare empty shell scripts ptex and nkf. */ /*&C */ /*&eg To run the system, you need to read OpenXM/rc/dot.cshrc or OpenXM/rc/dot.bashrc by the source command for setting proper environmental variable values. By the commands cd OpenXM/rc make you can generate dot.cshrc and dot.bashrc. Read these file by the source command in your .cshrc or .bashrc (or .bash_profile). */ /*&jp システムを動かすには, OpenXM/rc/dot.cshrc または OpenXM/rc/dot.bashrc を source コマンドで よみこみ環境変数の値を適切に設定する必要があります. コマンド cd OpenXM/rc make で dot.cshrc および dot.bashrc が生成されます. これらのファイルを source コマンドで, .cshrc または .bashrc (または .bash_profile) より読むようにして下さい. */ /*&C */ //&C --------------------------------------------------------- /*&eg ***** How to generate a subset of the full OpenXM package from the head branch. * The souce tarball of the head branch is at ftp.math.kobe-u.ac.jp/pub/OpenXM/Head/openxm-head.tar.gz Get this tarball by the ftp command. Extract the directories OpenXM OpenXM_contrib OpenXM_contrib2 by tar xzvf openxm-head.tar.gz */ /*&jp ★ OpenXM package の一部分のみ生成する方法 (head branch より). * Head ブランチの tarball は ftp.math.kobe-u.ac.jp/pub/OpenXM/Head/openxm-head.tar.gz にあります. これを ftp で取得してから tar xzvf openxm-head.tar.gz を展開してください. OpenXM OpenXM_contrib OpenXM_contrib2 が作成されます. */ /*&C */ /*&eg [Subpackage asir] If you want to generate only Risa/Asir, type in as follows. */ /*&jp [部分パッケージ asir] Risa/Asir のみを生成したい場合は, つぎのように入力します. */ /*&C (cd OpenXM/src ; make install-asir) (cd OpenXM/rc ; make ) */ /*&eg Copy the shell script "asir" at OpenXM/rc in your search path, e.g., /usr/local/bin or ~/bin Or, read OpenXM/rc/dot.bashrc or OpenXM/rc/dot.bashrc by the source command from your ~/.bashrc or ~/.cshrc. */ /*&jp OpenXM/rc の下のシェルスクリプト "asir" をサーチパスにコピーして ください (たとえば, /usr/local/bin or ~/bin へ). または OpenXM/rc/dot.bashrc か OpenXM/rc/dot.cshrc を source コマンドで ~/.bashrc か ~/.cshrc より読み込んでください. */ /*&C */ /*&eg [Subpackage kan-ox] If you want to generate only kan/k0, kan/sm1 and asir type in as follows. */ /*&jp [部分パッケージ kan-ox] Kan/k0, Kan/sm1, asir のみを生成したい場合は, つぎのように入力します. */ /*&C (cd OpenXM/src ; make install-kan-ox) (cd OpenXM/rc ; make ) */ /*&eg Copy the shell script "asir", "sm1" and "openxm" at OpenXM/rc to your search path, e.g., /usr/local/bin or ~/bin Or, read OpenXM/rc/dot.bashrc or OpenXM/rc/dot.bashrc by the source command from your ~/.bashrc or ~/.cshrc. */ /*&jp OpenXM/rc の下のシェルスクリプト "asir", "sm1", "openxm" を サーチパスにコピーして ください (たとえば, /usr/local/bin or ~/bin へ). または OpenXM/rc/dot.bashrc か OpenXM/rc/dot.cshrc を source コマンドで ~/.bashrc か ~/.cshrc より読み込んでください. */ //&C //&C ------------------------------------------------------ //&C /*&jp [OpenXM 下のファイルの構成メモ] lib/asir には, asir のライブラリ, ox_asir 本体 cd OpenXM/src/kxx ; make install-for-debug した場合, lib/sm1 は src/SSkan/Doc への symbolic link であり, sm1 のライブラリファイルが格納されています. lib/sm1/bin には, binaryfiles sm1, ox_sm1, ox, ox_log, ox_sm1_* へのシンボリックリンクが格納されます. このシンボリックリンクは src/kxx で make install-for-debug を実行することにより 作成されます. sm1 が ox_asir を利用するのに必要なファイル. lib/asir/ox_asir, lib/sm1/bin/ox, lib/sm1/bin/ox_log (src/kxx/ox, src/kxx/ox_log) lib/sm1/ox.sm1, lib/sm1/oxasir.sm1 asir が ox_sm1_forAsir を利用するのに必要なファイル: lib/asir/ox_launch lib/sm1/bin/ox_sm1_forAsir (ox_sm1 へのリンク) lib/asir/xm lib/sm1/ 以下の *.sm1 なるすべての ライブラリファイル. callsm1.sm1 callsm1b.sm1 (ox_sm1_forAsir の定義ファイル, src/kxx/oxserver00.c ox_sm1 が ox_sm1_forAsir という名前で呼ばれるとこれらのファイルをロード.) asir が ox_sm1_gnuplot を利用するのに必要なファイル: lib/asir/ox_launch lib/sm1/bin/ox_sm1_gnuplot (ox_sm1 へのリンク, ox_sm1_gnuplot は fork して gnuplot4ox を実行します.) lib/asir/xm lib/sm1/callsm1.sm1, lib/sm1/gnuplot.sm1 (ox_sm1_gnuplot の定義ファイル, src/kxx/oxserver00.c ox_sm1 が ox_sm1_gnuplot という名前で呼ばれるとこれらのファイルをロード.) bin/gnuplot4ox, bin/gnuplot_x11 (gnuplot 本体, src/gnuplot*) ---------------------------------------- [開発者用メモ] << sm1, ox_sm1, ox, oxlog の debug >> binary file は各 directory の make install により OpenXM/bin にコピーされますが, debug 用にいちいちコピーするのは面倒なので, OpenXM/src/kan96xx で make install-for-debug OpenXM/src/kxx で make install-for-debug を実行すると, OpenXM/bin/sm1, ox, ox_sm1, oxlog より, OpenXM/src/kan96xx/Kan/sm1 OpenXM/src/kxx/ox, OpenXM/src/kxx/ox_sm1, OpenXM/src/kxx/oxlog へのシンボリックリンクが作成されます. [CVSコミッタ用メモ] << OpenXM ディレクトリ配布版の作成方法 >> rcvs export -rHEAD OpenXM rcvs export -rHEAD OpenXM_contrib rcvs export -rHEAD OpenXM_contrib2 cd OpenXM/src ; make generate-source-distribution して, OpenXM, OpenXM_contrib, OpenXM_contrib2 全体を tar+gzip. */ /*&C */ /*&jp ★ Solaris に関する注意. Solaris ではまだ問題が山積してます. Solaris での make の問題点については, OpenXM/doc/OpenXM-FAQ-jp.txt を見てください. Solaris でコンパイルするには, /usr/ccs/bin をサーチパスの最初へもっていって おきます. */ /*&eg ***** COMPILE ON SOLARIS There are a lot of troubles on Solaris for now. At least, /usr/ccs/bin must be at the top of the command search path to compile on Solaris. */ /*&jp ★ Redhat Linux 6.1 上でのコンパイル m4-1.4 と autoconf-2.13 が必要. (あらかじめはいっている, autoconf は 2.12 でありこれは gnuplot の make で不具合を生じます.) */ /*&eg ***** COMPILE ON Redhat Linux 6.1 m4-1.4 and autoconf-2.13 are required. (Preinstalled autoconf is version 2.12. It causes a trouble when you build gnuplot.) */ /*&C */