#ifndef lint static char *RCSid = "$Id: gplt_x11.c,v 1.16.2.4 1999/10/15 16:04:50 lhecking Exp $"; #endif /* GNUPLOT - gplt_x11.c */ /*[ * Copyright 1986 - 1993, 1998 Thomas Williams, Colin Kelley * * Permission to use, copy, and distribute this software and its * documentation for any purpose with or without fee is hereby granted, * provided that the above copyright notice appear in all copies and * that both that copyright notice and this permission notice appear * in supporting documentation. * * Permission to modify the software is granted, but not the right to * distribute the complete modified source code. Modifications are to * be distributed as patches to the released version. Permission to * distribute binaries produced by compiling modified sources is granted, * provided you * 1. distribute the corresponding source modifications from the * released version in the form of a patch file along with the binaries, * 2. add special version identification to distinguish your version * in addition to the base release version number, * 3. provide your name and address as the primary contact for the * support of your modified version, and * 4. retain our contact information in regard to use of the base * software. * Permission to distribute the released version of the source code along * with corresponding source modifications in the form of a patch file is * granted with same provisions 2 through 4 for binary distributions. * * This software is provided "as is" without express or implied warranty * to the extent permitted by applicable law. ]*/ /* lph changes: * (a) make EXPORT_SELECTION the default and specify NOEXPORT to undefine * (b) append X11 terminal number to resource name * (c) change cursor for active terminal */ /*----------------------------------------------------------------------------- * gnuplot_x11 - X11 outboard terminal driver for gnuplot 3.3 * * Requires installation of companion inboard x11 driver in gnuplot/term.c * * Acknowledgements: * Chris Peterson (MIT) * Dana Chee (Bellcore) * Arthur Smith (Cornell) * Hendri Hondorp (University of Twente, The Netherlands) * Bill Kucharski (Solbourne) * Charlie Kline (University of Illinois) * Yehavi Bourvine (Hebrew University of Jerusalem, Israel) * Russell Lang (Monash University, Australia) * O'Reilly & Associates: X Window System - Volumes 1 & 2 * * This code is provided as is and with no warranties of any kind. * * drd: change to allow multiple windows to be maintained independently * * There is a mailing list for gnuplot users. Note, however, that the * newsgroup * comp.graphics.apps.gnuplot * is identical to the mailing list (they * both carry the same set of messages). We prefer that you read the * messages through that newsgroup, to subscribing to the mailing list. * (If you can read that newsgroup, and are already on the mailing list, * please send a message to majordomo@dartmouth.edu, asking to be * removed from the mailing list.) * * The address for mailing to list members is * info-gnuplot@dartmouth.edu * and for mailing administrative requests is * majordomo@dartmouth.edu * The mailing list for bug reports is * bug-gnuplot@dartmouth.edu * The list of those interested in beta-test versions is * info-gnuplot-beta@dartmouth.edu *---------------------------------------------------------------------------*/ /* drd : export the graph via ICCCM primary selection. well... not quite * ICCCM since we dont support full list of targets, but this * is a start. define EXPORT_SELECTION if you want this feature */ /*lph: add a "feature" to undefine EXPORT_SELECTION The following makes EXPORT_SELECTION the default and defining NOEXPORT over-rides the default */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #ifdef EXPORT_SELECTION # undef EXPORT_SELECTION #endif /* EXPORT SELECTION */ #ifndef NOEXPORT # define EXPORT_SELECTION XA_PRIMARY #endif /* NOEXPORT */ #if !(defined(VMS) || defined(CRIPPLED_SELECT)) # define DEFAULT_X11 #endif #if defined(VMS) && defined(CRIPPLED_SELECT) Error. Incompatible options. #endif #include #include #include #include #include #include #include #ifdef HAVE_SYS_BSDTYPES_H # include #endif /* HAVE_SYS_BSDTYPES_H */ #ifdef __EMX__ /* for gethostname ... */ # include #endif #if defined(HAVE_SYS_SELECT_H) && !defined(VMS) # include #endif /* HAVE_SYS_SELECT_H && !VMS */ #ifndef FD_SET # define FD_SET(n, p) ((p)->fds_bits[0] |= (1 << ((n) % 32))) # define FD_CLR(n, p) ((p)->fds_bits[0] &= ~(1 << ((n) % 32))) # define FD_ISSET(n, p) ((p)->fds_bits[0] & (1 << ((n) % 32))) # define FD_ZERO(p) memset((char *)(p),'\0',sizeof(*(p))) #endif /* not FD_SET */ #include "plot.h" #if defined(HAVE_SYS_SYSTEMINFO_H) && defined(HAVE_SYSINFO) # include # define SYSINFO_METHOD "sysinfo" # define GP_SYSTEMINFO(host) sysinfo (SI_HOSTNAME, (host), MAXHOSTNAMELEN) #else # define SYSINFO_METHOD "gethostname" # define GP_SYSTEMINFO(host) gethostname ((host), MAXHOSTNAMELEN) #endif /* HAVE_SYS_SYSTEMINFO_H && HAVE_SYSINFO */ #ifdef VMS # ifdef __DECC # include # endif /* __DECC */ # define EXIT(status) sys$delprc(0,0) /* VMS does not drop itself */ #else # define EXIT(status) exit(status) #endif #ifdef OSK # define EINTR E_ILLFNC #endif /* information about one window/plot */ typedef struct plot_struct { Window window; Pixmap pixmap; unsigned int posn_flags; int x, y; unsigned int width, height; /* window size */ unsigned int px, py; /* pointsize */ int ncommands, max_commands; char **commands; } plot_struct; void store_command __PROTO((char *line, plot_struct * plot)); void prepare_plot __PROTO((plot_struct * plot, int term_number)); void delete_plot __PROTO((plot_struct * plot)); int record __PROTO((void)); void process_event __PROTO((XEvent * event)); /* from Xserver */ void mainloop __PROTO((void)); void display __PROTO((plot_struct * plot)); void reset_cursor __PROTO((void)); void preset __PROTO((int argc, char *argv[])); char *pr_GetR __PROTO((XrmDatabase db, char *resource)); void pr_color __PROTO((void)); void pr_dashes __PROTO((void)); void pr_font __PROTO((void)); void pr_geometry __PROTO((void)); void pr_pointsize __PROTO((void)); void pr_width __PROTO((void)); Window pr_window __PROTO((unsigned int flags, int x, int y, unsigned int width, unsigned height)); void pr_raise __PROTO((void)); void pr_persist __PROTO((void)); #ifdef EXPORT_SELECTION void export_graph __PROTO((plot_struct * plot)); void handle_selection_event __PROTO((XEvent * event)); #endif #define FallbackFont "fixed" #define Ncolors 13 unsigned long colors[Ncolors]; #define Nwidths 10 unsigned int widths[Nwidths] = { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; #define Ndashes 10 char dashes[Ndashes][5]; #define MAX_WINDOWS 16 #define XC_crosshair 34 struct plot_struct plot_array[MAX_WINDOWS]; Display *dpy; int scr; Window root; Visual *vis; GC gc = (GC) 0; XFontStruct *font; int do_raise = 1, persist = 0; KeyCode q_keycode; Cursor cursor; int windows_open = 0; int gX = 100, gY = 100; unsigned int gW = 640, gH = 450; unsigned int gFlags = PSize; unsigned int BorderWidth = 2; unsigned int D; /* depth */ Bool Mono = 0, Gray = 0, Rv = 0, Clear = 0; char Name[64] = "gnuplot"; char Class[64] = "Gnuplot"; int cx = 0, cy = 0, vchar; double xscale, yscale, pointsize; #define X(x) (int) ((x) * xscale) #define Y(y) (int) ((4095-(y)) * yscale) #define Nbuf 1024 char buf[Nbuf], **commands = (char **) 0; static int buffered_input_available = 0; FILE *X11_ipc; char X11_ipcpath[32]; /* when using an ICCCM-compliant window manager, we can ask it * to send us an event when user chooses 'close window'. We do this * by setting WM_DELETE_WINDOW atom in property WM_PROTOCOLS */ Atom WM_PROTOCOLS, WM_DELETE_WINDOW; XPoint Diamond[5], Triangle[4]; XSegment Plus[2], Cross[2], Star[4]; /*----------------------------------------------------------------------------- * main program *---------------------------------------------------------------------------*/ int main(argc, argv) int argc; char *argv[]; { #ifdef OSK /* malloc large blocks, otherwise problems with fragmented mem */ _mallocmin(102400); #endif #ifdef __EMX__ /* close open file handles */ fcloseall(); #endif FPRINTF((stderr, "gnuplot_X11 starting up\n")); preset(argc, argv); /* set up the alternative cursor */ cursor = XCreateFontCursor(dpy, XC_crosshair); mainloop(); if (persist) { FPRINTF((stderr, "waiting for %d windows\n", windows_open)); /* read x events until all windows have been quit */ while (windows_open > 0) { XEvent event; XNextEvent(dpy, &event); process_event(&event); } } XCloseDisplay(dpy); FPRINTF((stderr, "exiting\n")); EXIT(0); } /*----------------------------------------------------------------------------- * mainloop processing - process X events and input from gnuplot * * Three different versions of main loop processing are provided to support * three different platforms. * * DEFAULT_X11: use select() for both X events and input on stdin * from gnuplot inboard driver * * CRIPPLED_SELECT: use select() to service X events and check during * select timeout for temporary plot file created * by inboard driver * * VMS: use XNextEvent to service X events and AST to * service input from gnuplot inboard driver on stdin *---------------------------------------------------------------------------*/ #ifdef DEFAULT_X11 /*----------------------------------------------------------------------------- * DEFAULT_X11 mainloop *---------------------------------------------------------------------------*/ void mainloop() { int nf, cn = ConnectionNumber(dpy), in; fd_set_size_t nfds; struct timeval timeout, *timer = (struct timeval *) 0; fd_set tset; X11_ipc = stdin; in = fileno(X11_ipc); #ifdef ISC22 /* Added by Robert Eckardt, RobertE@beta.TP2.Ruhr-Uni-Bochum.de */ timeout.tv_sec = 0; /* select() in ISC2.2 needs timeout */ timeout.tv_usec = 300000; /* otherwise input from gnuplot is */ timer = &timeout; /* suspended til next X event. */ #endif /* ISC22 (0.3s are short enough not to be noticed */ while (1) { /* XNextEvent does an XFlush() before waiting. But here. * we must ensure that the queue is flushed, since we * dont call XNextEvent until an event arrives. (I have * twice wasted quite some time over this issue, so now * I am making sure of it ! */ XFlush(dpy); FD_ZERO(&tset); FD_SET(cn, &tset); /* Don't wait for events if we know that input is * already sitting in a buffer. Also don't wait for * input to become available. */ if (buffered_input_available) { timeout.tv_sec = 0; timeout.tv_usec = 0; timer = &timeout; } else { timer = (struct timeval *) 0; FD_SET(in, &tset); } nfds = (cn > in) ? cn + 1 : in + 1; nf = select(nfds, SELECT_FD_SET_CAST &tset, 0, 0, timer); if (nf < 0) { if (errno == EINTR) continue; fprintf(stderr, "gnuplot: select failed. errno:%d\n", errno); EXIT(1); } if (nf > 0) XNoOp(dpy); if (FD_ISSET(cn, &tset)) { /* used to use CheckMaskEvent() but that cannot receive * maskable events such as ClientMessage. So now we do * one event, then return to the select. * And that almost works, except that under some Xservers * running without a window manager (e.g. Hummingbird Exceed under Win95) * a bogus ConfigureNotify is sent followed by a valid ConfigureNotify * when the window is maximized. The two events are queued, apparently * in a single I/O because select() above doesn't see the second, valid * event. This little loop fixes the problem by flushing the * event queue completely. */ XEvent xe; do { XNextEvent(dpy, &xe); process_event(&xe); } while (XPending(dpy)); } if (FD_ISSET(in, &tset) || buffered_input_available) { if (!record()) /* end of input */ return; } } } #elif defined(CRIPPLED_SELECT) /*----------------------------------------------------------------------------- * CRIPPLED_SELECT mainloop *---------------------------------------------------------------------------*/ void mainloop() { fd_set_size_t nf, nfds, cn = ConnectionNumber(dpy); struct timeval timeout, *timer; fd_set tset; unsigned long all = (unsigned long) (-1L); XEvent xe; timeout.tv_sec = 1; timeout.tv_usec = 0; timer = &timeout; sprintf(X11_ipcpath, "/tmp/Gnuplot_%d", getppid()); nfds = cn + 1; while (1) { XFlush(dpy); /* see above */ FD_ZERO(&tset); FD_SET(cn, &tset); /* Don't wait for events if we know that input is * already sitting in a buffer. Also don't wait for * input to become available. */ if (buffered_input_available) { timeout.tv_sec = 0; timeout.tv_usec = 0; timer = &timeout; } else { timer = (struct timeval *) 0; FD_SET(in, &tset); } nfds = (cn > in) ? cn + 1 : in + 1; nf = select(nfds, SELECT_FD_SET_CAST &tset, 0, 0, timer); if (nf < 0) { if (errno == EINTR) continue; fprintf(stderr, "gnuplot: select failed. errno:%d\n", errno); EXIT(1); } if (nf > 0) XNoOp(dpy); if (FD_ISSET(cn, &tset)) { while (XCheckMaskEvent(dpy, all, &xe)) { process_event(&xe); } } if ((X11_ipc = fopen(X11_ipcpath, "r"))) { unlink(X11_ipcpath); record(); fclose(X11_ipc); } } } #elif defined(VMS) /*----------------------------------------------------------------------------- * VMS mainloop - Yehavi Bourvine - YEHAVI@VMS.HUJI.AC.IL *---------------------------------------------------------------------------*/ /* In VMS there is no decent Select(). hence, we have to loop inside * XGetNextEvent for getting the next X window event. In order to get input * from the master we assign a channel to SYS$INPUT and use AST's in order to * receive data. In order to exit the mainloop, we need to somehow make * XNextEvent return from within the ast. We do this with a XSendEvent() to * ourselves ! * This needs a window to send the message to, so we create an unmapped window * for this purpose. Event type XClientMessage is perfect for this, but it * appears that such messages come from elsewhere (motif window manager, * perhaps ?) So we need to check fairly carefully that it is the ast event * that has been received. */ #include char STDIIN[] = "SYS$INPUT:"; short STDIINchannel, STDIINiosb[4]; struct { short size, type; char *address; } STDIINdesc; char STDIINbuffer[64]; int status; ast() { int status = sys$qio(0, STDIINchannel, IO$_READVBLK, STDIINiosb, record, 0, STDIINbuffer, sizeof(STDIINbuffer) - 1, 0, 0, 0, 0); if ((status & 0x1) == 0) EXIT(status); } Window message_window; void mainloop() { /* dummy unmapped window for receiving internally-generated terminate * messages */ message_window = XCreateSimpleWindow(dpy, root, 0, 0, 1, 1, 1, 0, 0); STDIINdesc.size = strlen(STDIIN); STDIINdesc.type = 0; STDIINdesc.address = STDIIN; status = sys$assign(&STDIINdesc, &STDIINchannel, 0, 0, 0); if ((status & 0x1) == 0) EXIT(status); ast(); for (;;) { XEvent xe; XNextEvent(dpy, &xe); if (xe.type == ClientMessage && xe.xclient.window == message_window) { if (xe.xclient.message_type == None && xe.xclient.format == 8 && strcmp(xe.xclient.data.b, "die gnuplot die") == 0) { FPRINTF((stderr, "quit message from ast\n")); return; } else { FPRINTF((stderr, "Bogus XClientMessage event from window manager ?\n")); } } process_event(&xe); } } #else /* !(DEFAULT_X11 || CRIPPLED_SELECT || VMS */ You lose. No mainloop. #endif /* !(DEFAULT_X11 || CRIPPLED_SELECT || VMS */ /* delete a window / plot */ void delete_plot(plot) plot_struct *plot; { int i; FPRINTF((stderr, "Delete plot %d\n", plot - plot_array)); for (i = 0; i < plot->ncommands; ++i) free(plot->commands[i]); plot->ncommands = 0; if (plot->window) { FPRINTF((stderr, "Destroy window 0x%x\n", plot->window)); XDestroyWindow(dpy, plot->window); plot->window = None; --windows_open; } if (plot->pixmap) { XFreePixmap(dpy, plot->pixmap); plot->pixmap = None; } /* but preserve geometry */ } /* prepare the plot structure */ void prepare_plot(plot, term_number) plot_struct *plot; int term_number; { int i; char *term_name; for (i = 0; i < plot->ncommands; ++i) free(plot->commands[i]); plot->ncommands = 0; if (!plot->posn_flags) { /* first time this window has been used - use default or -geometry * settings */ plot->posn_flags = gFlags; plot->x = gX; plot->y = gY; plot->width = gW; plot->height = gH; } if (!plot->window) { plot->window = pr_window(plot->posn_flags, plot->x, plot->y, plot->width, plot->height); ++windows_open; /* append the X11 terminal number (if greater than zero) */ if (term_number) { char new_name[60]; XFetchName(dpy, plot->window, &term_name); FPRINTF((stderr, "Window title is %s\n", term_name)); sprintf(new_name, "%.55s%3d", term_name, term_number); FPRINTF((stderr, "term_number is %d\n", term_number)); XStoreName(dpy, plot->window, new_name); sprintf(new_name, "gplt%3d", term_number); XSetIconName(dpy, plot->window, new_name); } } /* We don't know that it is the same window as before, so we reset the * cursors for all windows and then define the cursor for the active * window */ reset_cursor(); XDefineCursor(dpy, plot->window, cursor); } /* store a command in a plot structure */ void store_command(buffer, plot) char *buffer; plot_struct *plot; { char *p; FPRINTF((stderr, "Store in %d : %s", plot - plot_array, buffer)); if (plot->ncommands >= plot->max_commands) { plot->max_commands = plot->max_commands * 2 + 1; plot->commands = (plot->commands) ? (char **) realloc(plot->commands, plot->max_commands * sizeof(char *)) : (char **) malloc(sizeof(char *)); } p = (char *) malloc((unsigned) strlen(buffer) + 1); if (!plot->commands || !p) { fputs("gnuplot: can't get memory. X11 aborted.\n", stderr); EXIT(1); } plot->commands[plot->ncommands++] = strcpy(p, buffer); } #ifndef VMS /* Handle input. Use read instead of fgets because stdio buffering * causes trouble when combined with calls to select. */ int read_input () { static int rdbuf_size = 10*Nbuf; static char rdbuf[10*Nbuf-1]; static int total_chars; static int rdbuf_offset; static int buf_offset; static int partial_read = 0; int fd = fileno (X11_ipc); if (! partial_read) buf_offset = 0; if (! buffered_input_available) { total_chars = read (fd, rdbuf, rdbuf_size); buffered_input_available = 1; partial_read = 0; rdbuf_offset = 0; if (total_chars < 0) return -1; } if (rdbuf_offset < total_chars) { while (rdbuf_offset < total_chars && buf_offset < Nbuf) { char c = rdbuf[rdbuf_offset++]; buf[buf_offset++] = c; if (c == '\n') break; } if (buf_offset == Nbuf) { fputs("\ \n\ gnuplot: buffer overflow in read_input!\n\ gnuplot: X11 aborted.\n", stderr); EXIT(1); } else buf[buf_offset] = NUL; } if (rdbuf_offset == total_chars) { buffered_input_available = 0; if (buf[buf_offset-1] != '\n') partial_read = 1; } return partial_read; } /*----------------------------------------------------------------------------- * record - record new plot from gnuplot inboard X11 driver (Unix) *---------------------------------------------------------------------------*/ int record() { static plot_struct *plot = plot_array; while (1) { int status = read_input (); if (status != 0) return status; switch (*buf) { case 'G': /* enter graphics mode */ { int plot_number = atoi(buf + 1); /* 0 if none specified */ if (plot_number < 0 || plot_number >= MAX_WINDOWS) plot_number = 0; FPRINTF((stderr, "plot for window number %d\n", plot_number)); plot = plot_array + plot_number; prepare_plot(plot, plot_number); continue; } case 'E': /* leave graphics mode / suspend */ display(plot); return 1; case 'R': /* leave x11 mode */ reset_cursor(); return 0; default: store_command(buf, plot); continue; } } } #else /* VMS */ /*----------------------------------------------------------------------------- * record - record new plot from gnuplot inboard X11 driver (VMS) *---------------------------------------------------------------------------*/ record() { static plot_struct *plot = plot_array; int status; if ((STDIINiosb[0] & 0x1) == 0) EXIT(STDIINiosb[0]); STDIINbuffer[STDIINiosb[1]] = '\0'; strcpy(buf, STDIINbuffer); switch (*buf) { case 'G': /* enter graphics mode */ { int plot_number = atoi(buf + 1); /* 0 if none specified */ if (plot_number < 0 || plot_number >= MAX_WINDOWS) plot_number = 0; FPRINTF((stderr, "plot for window number %d\n", plot_number)); plot = plot_array + plot_number; prepare_plot(plot, plot_number); break; } case 'E': /* leave graphics mode */ display(plot); break; case 'R': /* exit x11 mode */ FPRINTF((stderr, "received R - sending ClientMessage\n")); reset_cursor(); sys$cancel(STDIINchannel); /* this is ridiculous - cook up an event to ourselves, * in order to get the mainloop() out of the XNextEvent() call * it seems that window manager can also send clientmessages, * so put a checksum into the message */ { XClientMessageEvent event; event.type = ClientMessage; event.send_event = True; event.display = dpy; event.window = message_window; event.message_type = None; event.format = 8; strcpy(event.data.b, "die gnuplot die"); XSendEvent(dpy, message_window, False, 0, (XEvent *) & event); XFlush(dpy); } return; /* no ast */ default: store_command(buf, plot); break; } ast(); } #endif /* VMS */ /*----------------------------------------------------------------------------- * display - display a stored plot *---------------------------------------------------------------------------*/ void display(plot) plot_struct *plot; { int n, x, y, sw, sl, lt = 0, width, type, point, px, py; int user_width = 1; /* as specified by plot...linewidth */ char *buffer, *str; enum JUSTIFY jmode; FPRINTF((stderr, "Display %d ; %d commands\n", plot - plot_array, plot->ncommands)); if (plot->ncommands == 0) return; /* set scaling factor between internal driver & window geometry */ xscale = plot->width / 4096.0; yscale = plot->height / 4096.0; /* initial point sizes, until overridden with P7xxxxyyyy */ px = (int) (xscale * pointsize); py = (int) (yscale * pointsize); /* create new pixmap & GC */ if (gc) XFreeGC(dpy, gc); if (!plot->pixmap) { FPRINTF((stderr, "Create pixmap %d : %dx%dx%d\n", plot - plot_array, plot->width, plot->height, D)); plot->pixmap = XCreatePixmap(dpy, root, plot->width, plot->height, D); } gc = XCreateGC(dpy, plot->pixmap, 0, (XGCValues *) 0); XSetFont(dpy, gc, font->fid); /* set pixmap background */ XSetForeground(dpy, gc, colors[0]); XFillRectangle(dpy, plot->pixmap, gc, 0, 0, plot->width, plot->height); XSetBackground(dpy, gc, colors[0]); if (!plot->window) { plot->window = pr_window(plot->posn_flags, plot->x, plot->y, plot->width, plot->height); ++windows_open; } /* top the window but don't put keyboard or mouse focus into it. */ if (do_raise) XMapRaised(dpy, plot->window); /* momentarily clear the window first if requested */ if (Clear) { XClearWindow(dpy, plot->window); XFlush(dpy); } /* loop over accumulated commands from inboard driver */ for (n = 0; n < plot->ncommands; n++) { buffer = plot->commands[n]; /* X11_vector(x,y) - draw vector */ if (*buffer == 'V') { sscanf(buffer, "V%4d%4d", &x, &y); XDrawLine(dpy, plot->pixmap, gc, X(cx), Y(cy), X(x), Y(y)); cx = x; cy = y; } /* X11_move(x,y) - move */ else if (*buffer == 'M') sscanf(buffer, "M%4d%4d", &cx, &cy); /* X11_put_text(x,y,str) - draw text */ else if (*buffer == 'T') { sscanf(buffer, "T%4d%4d", &x, &y); str = buffer + 9; sl = strlen(str) - 1; sw = XTextWidth(font, str, sl); switch (jmode) { case LEFT: sw = 0; break; case CENTRE: sw = -sw / 2; break; case RIGHT: sw = -sw; break; } XSetForeground(dpy, gc, colors[2]); XDrawString(dpy, plot->pixmap, gc, X(x) + sw, Y(y) + vchar / 3, str, sl); XSetForeground(dpy, gc, colors[lt + 3]); } else if (*buffer == 'F') { /* fill box */ int style, xtmp, ytmp, w, h; if (sscanf(buffer + 1, "%4d%4d%4d%4d%4d", &style, &xtmp, &ytmp, &w, &h) == 5) { /* gnuplot has origin at bottom left, but X uses top left * There may be an off-by-one (or more) error here. * style ignored here for the moment */ ytmp += h; /* top left corner of rectangle to be filled */ w *= xscale; h *= yscale; XSetForeground(dpy, gc, colors[0]); XFillRectangle(dpy, plot->pixmap, gc, X(xtmp), Y(ytmp), w, h); XSetForeground(dpy, gc, colors[lt + 3]); } } /* X11_justify_text(mode) - set text justification mode */ else if (*buffer == 'J') sscanf(buffer, "J%4d", (int *) &jmode); /* X11_linewidth(width) - set line width */ else if (*buffer == 'W') sscanf(buffer + 1, "%4d", &user_width); /* X11_linetype(type) - set line type */ else if (*buffer == 'L') { sscanf(buffer, "L%4d", <); lt = (lt % 8) + 2; /* default width is 0 {which X treats as 1} */ width = widths[lt] ? user_width * widths[lt] : user_width; if (dashes[lt][0]) { type = LineOnOffDash; XSetDashes(dpy, gc, 0, dashes[lt], strlen(dashes[lt])); } else { type = LineSolid; } XSetForeground(dpy, gc, colors[lt + 3]); XSetLineAttributes(dpy, gc, width, type, CapButt, JoinBevel); } /* X11_point(number) - draw a point */ else if (*buffer == 'P') { /* linux sscanf does not like %1d%4d%4d" with Oxxxxyyyy */ /* sscanf(buffer, "P%1d%4d%4d", &point, &x, &y); */ point = buffer[1] - '0'; sscanf(buffer + 2, "%4d%4d", &x, &y); if (point == 7) { /* set point size */ px = (int) (x * xscale * pointsize); py = (int) (y * yscale * pointsize); } else { if (type != LineSolid || width != 0) { /* select solid line */ XSetLineAttributes(dpy, gc, 0, LineSolid, CapButt, JoinBevel); } switch (point) { case 0: /* dot */ XDrawPoint(dpy, plot->pixmap, gc, X(x), Y(y)); break; case 1: /* do diamond */ Diamond[0].x = (short) X(x) - px; Diamond[0].y = (short) Y(y); Diamond[1].x = (short) px; Diamond[1].y = (short) -py; Diamond[2].x = (short) px; Diamond[2].y = (short) py; Diamond[3].x = (short) -px; Diamond[3].y = (short) py; Diamond[4].x = (short) -px; Diamond[4].y = (short) -py; /* * Should really do a check with XMaxRequestSize() */ XDrawLines(dpy, plot->pixmap, gc, Diamond, 5, CoordModePrevious); XDrawPoint(dpy, plot->pixmap, gc, X(x), Y(y)); break; case 2: /* do plus */ Plus[0].x1 = (short) X(x) - px; Plus[0].y1 = (short) Y(y); Plus[0].x2 = (short) X(x) + px; Plus[0].y2 = (short) Y(y); Plus[1].x1 = (short) X(x); Plus[1].y1 = (short) Y(y) - py; Plus[1].x2 = (short) X(x); Plus[1].y2 = (short) Y(y) + py; XDrawSegments(dpy, plot->pixmap, gc, Plus, 2); break; case 3: /* do box */ XDrawRectangle(dpy, plot->pixmap, gc, X(x) - px, Y(y) - py, (px + px), (py + py)); XDrawPoint(dpy, plot->pixmap, gc, X(x), Y(y)); break; case 4: /* do X */ Cross[0].x1 = (short) X(x) - px; Cross[0].y1 = (short) Y(y) - py; Cross[0].x2 = (short) X(x) + px; Cross[0].y2 = (short) Y(y) + py; Cross[1].x1 = (short) X(x) - px; Cross[1].y1 = (short) Y(y) + py; Cross[1].x2 = (short) X(x) + px; Cross[1].y2 = (short) Y(y) - py; XDrawSegments(dpy, plot->pixmap, gc, Cross, 2); break; case 5: /* do triangle */ { short temp_x, temp_y; temp_x = (short) (1.33 * (double) px + 0.5); temp_y = (short) (1.33 * (double) py + 0.5); Triangle[0].x = (short) X(x); Triangle[0].y = (short) Y(y) - temp_y; Triangle[1].x = (short) temp_x; Triangle[1].y = (short) 2 *py; Triangle[2].x = (short) -(2 * temp_x); Triangle[2].y = (short) 0; Triangle[3].x = (short) temp_x; Triangle[3].y = (short) -(2 * py); XDrawLines(dpy, plot->pixmap, gc, Triangle, 4, CoordModePrevious); XDrawPoint(dpy, plot->pixmap, gc, X(x), Y(y)); } break; case 6: /* do star */ Star[0].x1 = (short) X(x) - px; Star[0].y1 = (short) Y(y); Star[0].x2 = (short) X(x) + px; Star[0].y2 = (short) Y(y); Star[1].x1 = (short) X(x); Star[1].y1 = (short) Y(y) - py; Star[1].x2 = (short) X(x); Star[1].y2 = (short) Y(y) + py; Star[2].x1 = (short) X(x) - px; Star[2].y1 = (short) Y(y) - py; Star[2].x2 = (short) X(x) + px; Star[2].y2 = (short) Y(y) + py; Star[3].x1 = (short) X(x) - px; Star[3].y1 = (short) Y(y) + py; Star[3].x2 = (short) X(x) + px; Star[3].y2 = (short) Y(y) - py; XDrawSegments(dpy, plot->pixmap, gc, Star, 4); break; } if (type != LineSolid || width != 0) { /* select solid line */ XSetLineAttributes(dpy, gc, width, type, CapButt, JoinBevel); } } } } /* set new pixmap as window background */ XSetWindowBackgroundPixmap(dpy, plot->window, plot->pixmap); /* trigger exposure of background pixmap */ XClearWindow(dpy, plot->window); #ifdef EXPORT_SELECTION export_graph(plot); #endif XFlush(dpy); } /*--------------------------------------------------------------------------- * reset all cursors (since we dont have a record of the previous terminal #) *---------------------------------------------------------------------------*/ void reset_cursor() { int plot_number; plot_struct *plot = plot_array; for (plot_number = 0, plot = plot_array; plot_number < MAX_WINDOWS; ++plot_number, ++plot) { if (plot->window) { FPRINTF((stderr, "Window for plot %d exists\n", plot_number)); XUndefineCursor(dpy, plot->window);; } } FPRINTF((stderr, "Cursors reset\n")); return; } /*----------------------------------------------------------------------------- * resize - rescale last plot if window resized *---------------------------------------------------------------------------*/ plot_struct * find_plot(window) Window window; { int plot_number; plot_struct *plot = plot_array; for (plot_number = 0, plot = plot_array; plot_number < MAX_WINDOWS; ++plot_number, ++plot) { if (plot->window == window) { FPRINTF((stderr, "Event for plot %d\n", plot_number)); return plot; } } FPRINTF((stderr, "Bogus window 0x%x in event !\n", window)); return NULL; } void process_event(event) XEvent *event; { FPRINTF((stderr, "Event 0x%x\n", event->type)); switch (event->type) { case ConfigureNotify: { plot_struct *plot = find_plot(event->xconfigure.window); if (plot) { int w = event->xconfigure.width, h = event->xconfigure.height; /* store settings in case window is closed then recreated */ plot->x = event->xconfigure.x; plot->y = event->xconfigure.y; plot->posn_flags = (plot->posn_flags & ~PPosition) | USPosition; if (w > 1 && h > 1 && (w != plot->width || h != plot->height)) { plot->width = w; plot->height = h; plot->posn_flags = (plot->posn_flags & ~PSize) | USSize; if (plot->pixmap) { /* it is the wrong size now */ FPRINTF((stderr, "Free pixmap %d\n", 0)); XFreePixmap(dpy, plot->pixmap); plot->pixmap = None; } display(plot); } } break; } case KeyPress: if (event->xkey.keycode == q_keycode) { plot_struct *plot = find_plot(event->xkey.window); if (plot) delete_plot(plot); } break; case ClientMessage: if (event->xclient.message_type == WM_PROTOCOLS && event->xclient.format == 32 && event->xclient.data.l[0] == WM_DELETE_WINDOW) { plot_struct *plot = find_plot(event->xclient.window); if (plot) delete_plot(plot); } break; #ifdef EXPORT_SELECTION case SelectionNotify: case SelectionRequest: handle_selection_event(event); break; #endif } } /*----------------------------------------------------------------------------- * preset - determine options, open display, create window *---------------------------------------------------------------------------*/ /* #define On(v) ( !strcmp(v,"on") || !strcmp(v,"true") || \ !strcmp(v,"On") || !strcmp(v,"True") || \ !strcmp(v,"ON") || !strcmp(v,"TRUE") ) */ #define On(v) ( !strnicmp(v,"on",2) || !strnicmp(v,"true",4) ) #define AppDefDir "/usr/lib/X11/app-defaults" #ifndef MAXHOSTNAMELEN #define MAXHOSTNAMELEN 64 #endif static XrmDatabase dbCmd, dbApp, dbDef, dbEnv, db = (XrmDatabase) 0; char *pr_GetR(), *getenv(), *type[20]; XrmValue value; static XrmOptionDescRec options[] = { {"-mono", ".mono", XrmoptionNoArg, (caddr_t) "on"}, {"-gray", ".gray", XrmoptionNoArg, (caddr_t) "on"}, {"-clear", ".clear", XrmoptionNoArg, (caddr_t) "on"}, {"-tvtwm", ".tvtwm", XrmoptionNoArg, (caddr_t) "on"}, {"-pointsize", ".pointsize", XrmoptionSepArg, (caddr_t) NULL}, {"-display", ".display", XrmoptionSepArg, (caddr_t) NULL}, {"-name", ".name", XrmoptionSepArg, (caddr_t) NULL}, {"-geometry", "*geometry", XrmoptionSepArg, (caddr_t) NULL}, {"-background", "*background", XrmoptionSepArg, (caddr_t) NULL}, {"-bg", "*background", XrmoptionSepArg, (caddr_t) NULL}, {"-foreground", "*foreground", XrmoptionSepArg, (caddr_t) NULL}, {"-fg", "*foreground", XrmoptionSepArg, (caddr_t) NULL}, {"-bordercolor", "*bordercolor", XrmoptionSepArg, (caddr_t) NULL}, {"-bd", "*bordercolor", XrmoptionSepArg, (caddr_t) NULL}, {"-borderwidth", ".borderwidth", XrmoptionSepArg, (caddr_t) NULL}, {"-bw", ".borderwidth", XrmoptionSepArg, (caddr_t) NULL}, {"-font", "*font", XrmoptionSepArg, (caddr_t) NULL}, {"-fn", "*font", XrmoptionSepArg, (caddr_t) NULL}, {"-reverse", "*reverseVideo", XrmoptionNoArg, (caddr_t) "on"}, {"-rv", "*reverseVideo", XrmoptionNoArg, (caddr_t) "on"}, {"+rv", "*reverseVideo", XrmoptionNoArg, (caddr_t) "off"}, {"-iconic", "*iconic", XrmoptionNoArg, (caddr_t) "on"}, {"-synchronous", "*synchronous", XrmoptionNoArg, (caddr_t) "on"}, {"-xnllanguage", "*xnllanguage", XrmoptionSepArg, (caddr_t) NULL}, {"-selectionTimeout", "*selectionTimeout", XrmoptionSepArg, (caddr_t) NULL}, {"-title", ".title", XrmoptionSepArg, (caddr_t) NULL}, {"-xrm", NULL, XrmoptionResArg, (caddr_t) NULL}, {"-raise", "*raise", XrmoptionNoArg, (caddr_t) "on"}, {"-noraise", "*raise", XrmoptionNoArg, (caddr_t) "off"}, {"-persist", "*persist", XrmoptionNoArg, (caddr_t) "on"} }; #define Nopt (sizeof(options) / sizeof(options[0])) void preset(argc, argv) int argc; char *argv[]; { int Argc = argc; char **Argv = argv; #ifdef VMS char *ldisplay = (char *) 0; #else char *ldisplay = getenv("DISPLAY"); #endif char *home = getenv("HOME"); char *server_defaults, *env, buffer[256]; /* avoid bus error when env vars are not set */ if (ldisplay == NULL) ldisplay = ""; if (home == NULL) home = ""; /*---set to ignore ^C and ^Z----------------------------------------------*/ signal(SIGINT, SIG_IGN); #ifdef SIGTSTP signal(SIGTSTP, SIG_IGN); #endif /*---prescan arguments for "-name"----------------------------------------*/ while (++Argv, --Argc > 0) { if (!strcmp(*Argv, "-name") && Argc > 1) { strncpy(Name, Argv[1], sizeof(Name) - 1); strncpy(Class, Argv[1], sizeof(Class) - 1); /* just in case */ Name[sizeof(Name)-1] = NUL; Class[sizeof(Class)-1] = NUL; if (Class[0] >= 'a' && Class[0] <= 'z') Class[0] -= 0x20; } } Argc = argc; Argv = argv; /*---parse command line---------------------------------------------------*/ XrmInitialize(); XrmParseCommand(&dbCmd, options, Nopt, Name, &Argc, Argv); if (Argc > 1) { fprintf(stderr, "\n\ gnuplot: bad option: %s\n\ gnuplot: X11 aborted.\n", Argv[1]); EXIT(1); } if (pr_GetR(dbCmd, ".display")) ldisplay = (char *) value.addr; /*---open display---------------------------------------------------------*/ dpy = XOpenDisplay(ldisplay); if (!dpy) { fprintf(stderr, "\n\ gnuplot: unable to open display '%s'\n\ gnuplot: X11 aborted.\n", ldisplay); EXIT(1); } scr = DefaultScreen(dpy); vis = DefaultVisual(dpy, scr); D = DefaultDepth(dpy, scr); root = DefaultRootWindow(dpy); server_defaults = XResourceManagerString(dpy); /*---get symcode for key q ---*/ q_keycode = XKeysymToKeycode(dpy, XK_q); /**** atoms we will need later ****/ WM_PROTOCOLS = XInternAtom(dpy, "WM_PROTOCOLS", False); WM_DELETE_WINDOW = XInternAtom(dpy, "WM_DELETE_WINDOW", False); /*---get application defaults--(subset of Xt processing)------------------*/ #ifdef VMS strcpy(buffer, "DECW$USER_DEFAULTS:GNUPLOT_X11.INI"); #elif defined OS2 /* for Xfree86 ... */ { char *appdefdir = "XFree86/lib/X11/app-defaults"; char *xroot = getenv("X11ROOT"); sprintf(buffer, "%s/%s/%s", xroot, appdefdir, "Gnuplot"); } # else /* !OS/2 */ strcpy(buffer, AppDefDir); strcat(buffer, "/"); strcat(buffer, "Gnuplot"); #endif /* !VMS */ dbApp = XrmGetFileDatabase(buffer); XrmMergeDatabases(dbApp, &db); /*---get server or ~/.Xdefaults-------------------------------------------*/ if (server_defaults) dbDef = XrmGetStringDatabase(server_defaults); else { #ifdef VMS strcpy(buffer, "DECW$USER_DEFAULTS:DECW$XDEFAULTS.DAT"); #else strcpy(buffer, home); strcat(buffer, ".Xdefaults"); #endif dbDef = XrmGetFileDatabase(buffer); } XrmMergeDatabases(dbDef, &db); /*---get XENVIRONMENT or ~/.Xdefaults-hostname---------------------------*/ #ifndef VMS if ((env = getenv("XENVIRONMENT")) != NULL) dbEnv = XrmGetFileDatabase(env); else { char *p = NULL, host[MAXHOSTNAMELEN]; if (GP_SYSTEMINFO(host) < 0) { fprintf(stderr, "gnuplot: %s failed. X11 aborted.\n", SYSINFO_METHOD); EXIT(1); } if ((p = strchr(host, '.')) != NULL) *p = '\0'; strcpy(buffer, home); strcat(buffer, "/.Xdefaults-"); strcat(buffer, host); dbEnv = XrmGetFileDatabase(buffer); } XrmMergeDatabases(dbEnv, &db); #endif /* not VMS */ /*---merge command line options-------------------------------------------*/ XrmMergeDatabases(dbCmd, &db); /*---set geometry, font, colors, line widths, dash styles, point size-----*/ pr_geometry(); pr_font(); pr_color(); pr_width(); pr_dashes(); pr_pointsize(); pr_raise(); pr_persist(); } /*----------------------------------------------------------------------------- * pr_GetR - get resource from database using "-name" option (if any) *---------------------------------------------------------------------------*/ char * pr_GetR(xrdb, resource) XrmDatabase xrdb; char *resource; { char name[128], class[128], *rc; strcpy(name, Name); strcat(name, resource); strcpy(class, Class); strcat(class, resource); rc = XrmGetResource(xrdb, name, class, type, &value) ? (char *) value.addr : (char *) 0; return (rc); } /*----------------------------------------------------------------------------- * pr_color - determine color values *---------------------------------------------------------------------------*/ char color_keys[Ncolors][30] = { "background", "bordercolor", "text", "border", "axis", "line1", "line2", "line3", "line4", "line5", "line6", "line7", "line8" }; char color_values[Ncolors][30] = { "white", "black", "black", "black", "black", "red", "green", "blue", "magenta", "cyan", "sienna", "orange", "coral" }; char gray_values[Ncolors][30] = { "black", "white", "white", "gray50", "gray50", "gray100", "gray60", "gray80", "gray40", "gray90", "gray50", "gray70", "gray30" }; void pr_color() { unsigned long black = BlackPixel(dpy, scr), white = WhitePixel(dpy, scr); char option[20], color[30], *v, *ctype; XColor xcolor; Colormap cmap; double intensity = -1; int n; pr_GetR(db, ".mono") && On(value.addr) && Mono++; pr_GetR(db, ".gray") && On(value.addr) && Gray++; pr_GetR(db, ".reverseVideo") && On(value.addr) && Rv++; if (!Gray && (vis->class == GrayScale || vis->class == StaticGray)) Mono++; if (!Mono) { cmap = DefaultColormap(dpy, scr); ctype = (Gray) ? "Gray" : "Color"; for (n = 0; n < Ncolors; n++) { strcpy(option, "."); strcat(option, color_keys[n]); (n > 1) && strcat(option, ctype); v = pr_GetR(db, option) ? (char *) value.addr : ((Gray) ? gray_values[n] : color_values[n]); if (sscanf(v, "%30[^,],%lf", color, &intensity) == 2) { if (intensity < 0 || intensity > 1) { fprintf(stderr, "\ngnuplot: invalid color intensity in '%s'\n", color); intensity = 1; } } else { strcpy(color, v); intensity = 1; } if (!XParseColor(dpy, cmap, color, &xcolor)) { fprintf(stderr, "\ngnuplot: unable to parse '%s'. Using black.\n", color); colors[n] = black; } else { xcolor.red *= intensity; xcolor.green *= intensity; xcolor.blue *= intensity; if (XAllocColor(dpy, cmap, &xcolor)) { colors[n] = xcolor.pixel; } else { fprintf(stderr, "\ngnuplot: can't allocate '%s'. Using black.\n", v); colors[n] = black; } } } } else { colors[0] = (Rv) ? black : white; for (n = 1; n < Ncolors; n++) colors[n] = (Rv) ? white : black; } } /*----------------------------------------------------------------------------- * pr_dashes - determine line dash styles *---------------------------------------------------------------------------*/ char dash_keys[Ndashes][10] = { "border", "axis", "line1", "line2", "line3", "line4", "line5", "line6", "line7", "line8" }; char dash_mono[Ndashes][10] = { "0", "16", "0", "42", "13", "44", "15", "4441", "42", "13" }; char dash_color[Ndashes][10] = { "0", "16", "0", "0", "0", "0", "0", "0", "0", "0" }; void pr_dashes() { int n, j, l, ok; char option[20], *v; for (n = 0; n < Ndashes; n++) { strcpy(option, "."); strcat(option, dash_keys[n]); strcat(option, "Dashes"); v = pr_GetR(db, option) ? (char *) value.addr : ((Mono) ? dash_mono[n] : dash_color[n]); l = strlen(v); if (l == 1 && *v == '0') { dashes[n][0] = (unsigned char) 0; continue; } for (ok = 0, j = 0; j < l; j++) { v[j] >= '1' && v[j] <= '9' && ok++; } if (ok != l || (ok != 2 && ok != 4)) { fprintf(stderr, "gnuplot: illegal dashes value %s:%s\n", option, v); dashes[n][0] = (unsigned char) 0; continue; } for (j = 0; j < l; j++) { dashes[n][j] = (unsigned char) (v[j] - '0'); } dashes[n][l] = (unsigned char) 0; } } /*----------------------------------------------------------------------------- * pr_font - determine font *---------------------------------------------------------------------------*/ void pr_font() { char *fontname = pr_GetR(db, ".font"); if (!fontname) fontname = FallbackFont; font = XLoadQueryFont(dpy, fontname); if (!font) { fprintf(stderr, "\ngnuplot: can't load font '%s'\n", fontname); fprintf(stderr, "gnuplot: using font '%s' instead.\n", FallbackFont); font = XLoadQueryFont(dpy, FallbackFont); if (!font) { fprintf(stderr, "\ gnuplot: can't load font '%s'\n\ gnuplot: no useable font - X11 aborted.\n", FallbackFont); EXIT(1); } } vchar = font->ascent + font->descent; } /*----------------------------------------------------------------------------- * pr_geometry - determine window geometry *---------------------------------------------------------------------------*/ void pr_geometry() { char *geometry = pr_GetR(db, ".geometry"); int x, y, flags; unsigned int w, h; if (geometry) { flags = XParseGeometry(geometry, &x, &y, &w, &h); if (flags & WidthValue) gW = w; if (flags & HeightValue) gH = h; if (flags & (WidthValue | HeightValue)) gFlags = (gFlags & ~PSize) | USSize; if (flags & XValue) gX = (flags & XNegative) ? x + DisplayWidth(dpy, scr) - gW - BorderWidth * 2 : x; if (flags & YValue) gY = (flags & YNegative) ? y + DisplayHeight(dpy, scr) - gH - BorderWidth * 2 : y; if (flags & (XValue | YValue)) gFlags = (gFlags & ~PPosition) | USPosition; } } /*----------------------------------------------------------------------------- * pr_pointsize - determine size of points for 'points' plotting style *---------------------------------------------------------------------------*/ void pr_pointsize() { if (pr_GetR(db, ".pointsize")) { if (sscanf((char *) value.addr, "%lf", &pointsize) == 1) { if (pointsize <= 0 || pointsize > 10) { fprintf(stderr, "\ngnuplot: invalid pointsize '%s'\n", value.addr); pointsize = 1; } } else { fprintf(stderr, "\ngnuplot: invalid pointsize '%s'\n", value.addr); pointsize = 1; } } else { pointsize = 1; } } /*----------------------------------------------------------------------------- * pr_width - determine line width values *---------------------------------------------------------------------------*/ char width_keys[Nwidths][30] = { "border", "axis", "line1", "line2", "line3", "line4", "line5", "line6", "line7", "line8" }; void pr_width() { int n; char option[20], *v; for (n = 0; n < Nwidths; n++) { strcpy(option, "."); strcat(option, width_keys[n]); strcat(option, "Width"); if ((v = pr_GetR(db, option)) != NULL) { if (*v < '0' || *v > '4' || strlen(v) > 1) fprintf(stderr, "gnuplot: illegal width value %s:%s\n", option, v); else widths[n] = (unsigned int) atoi(v); } } } /*----------------------------------------------------------------------------- * pr_window - create window *---------------------------------------------------------------------------*/ Window pr_window(flags, x, y, width, height) unsigned int flags; int x, y; unsigned int width, height; { char *title = pr_GetR(db, ".title"); static XSizeHints hints; int Tvtwm = 0; Window win = XCreateSimpleWindow(dpy, root, x, y, width, height, BorderWidth, colors[1], colors[0]); /* ask ICCCM-compliant window manager to tell us when close window * has been chosen, rather than just killing us */ XChangeProperty(dpy, win, WM_PROTOCOLS, XA_ATOM, 32, PropModeReplace, (unsigned char *) &WM_DELETE_WINDOW, 1); pr_GetR(db, ".clear") && On(value.addr) && Clear++; pr_GetR(db, ".tvtwm") && On(value.addr) && Tvtwm++; if (!Tvtwm) { hints.flags = flags; } else { hints.flags = (flags & ~USPosition) | PPosition; /* ? */ } hints.x = gX; hints.y = gY; hints.width = width; hints.height = height; XSetNormalHints(dpy, win, &hints); if (pr_GetR(db, ".iconic") && On(value.addr)) { XWMHints wmh; wmh.flags = StateHint; wmh.initial_state = IconicState; XSetWMHints(dpy, win, &wmh); } XStoreName(dpy, win, ((title) ? title : Class)); XSelectInput(dpy, win, KeyPressMask | StructureNotifyMask); XMapWindow(dpy, win); return win; } /***** pr_raise ***/ void pr_raise() { if (pr_GetR(db, ".raise")) do_raise = (On(value.addr)); } void pr_persist() { if (pr_GetR(db, ".persist")) persist = (On(value.addr)); } /************ code to handle selection export *********************/ #ifdef EXPORT_SELECTION /* bit of a bodge, but ... */ static struct plot_struct *exported_plot; void export_graph(plot) struct plot_struct *plot; { FPRINTF((stderr, "export_graph(0x%x)\n", plot)); XSetSelectionOwner(dpy, EXPORT_SELECTION, plot->window, CurrentTime); /* to check we have selection, we would have to do a * GetSelectionOwner(), but if it failed, it failed - no big deal */ exported_plot = plot; } void handle_selection_event(event) XEvent *event; { switch (event->type) { case SelectionRequest: { XEvent reply; static Atom XA_TARGETS = (Atom) 0; if (XA_TARGETS == 0) XA_TARGETS = XInternAtom(dpy, "TARGETS", False); reply.type = SelectionNotify; reply.xselection.send_event = True; reply.xselection.display = event->xselectionrequest.display; reply.xselection.requestor = event->xselectionrequest.requestor; reply.xselection.selection = event->xselectionrequest.selection; reply.xselection.target = event->xselectionrequest.target; reply.xselection.property = event->xselectionrequest.property; reply.xselection.time = event->xselectionrequest.time; FPRINTF((stderr, "selection request\n")); if (reply.xselection.target == XA_TARGETS) { static Atom targets[] = { XA_PIXMAP, XA_COLORMAP }; FPRINTF((stderr, "Targets request from %d\n", reply.xselection.requestor)); XChangeProperty(dpy, reply.xselection.requestor, reply.xselection.property, reply.xselection.target, 32, PropModeReplace, (unsigned char *) targets, 2); } else if (reply.xselection.target == XA_COLORMAP) { Colormap cmap = DefaultColormap(dpy, 0); FPRINTF((stderr, "colormap request from %d\n", reply.xselection.requestor)); XChangeProperty(dpy, reply.xselection.requestor, reply.xselection.property, reply.xselection.target, 32, PropModeReplace, (unsigned char *) &cmap, 1); } else if (reply.xselection.target == XA_PIXMAP) { FPRINTF((stderr, "pixmap request from %d\n", reply.xselection.requestor)); XChangeProperty(dpy, reply.xselection.requestor, reply.xselection.property, reply.xselection.target, 32, PropModeReplace, (unsigned char *) &(exported_plot->pixmap), 1); } else { reply.xselection.property = None; } XSendEvent(dpy, reply.xselection.requestor, False, 0L, &reply); /* we never block on XNextEvent(), so must flush manually * (took me *ages* to find this out !) */ XFlush(dpy); } break; } } #endif /* EXPORT_SELECTION */