# Makefile for SAS/C 6.1 or better on the Amiga
#
# $Id: makefile.amg,v 1.8.2.1 1999/08/19 14:39:00 lhecking Exp $
#
# Makefile for use with SAS/C 6.50 or newer
#   on AmigaOS 2.0 and above
#
# last modification date: 19990204
#

#
# ***************** Begin of Configuration section ***************************
#

# Comment out the definition lines to disable the according features
# Substitute the path names for the actual path where includes/libs reside

# GD (GIF) device driver
# requires GD library (not part of gnuplot)
#GD_DEF = DEF=HAVE_LIBGD
#GD_INCLUDE = IDIR=gd1.3
#GD_LIB = gd1.3/gd.lib

# PNG device driver
# requires PNG and Z libraries (not part of gnuplot)
#PNG_DEF = def=HAVE_LIBPNG
#PNG_INCLUDE = IDIR=libpng-1.0.2
#PNG_LIB = libpng-1.0.2/png.lib
#Z_INCLUDE = IDIR=zlib-1.1.3
#Z_LIB = zlib-1.1.3/z.lib

CC = sc

# cpu type
# valid values are:
#  ANY (default; same as 68000) 68010 68020 68030 68040 68060 (new in 6.57)
CPU = CPU=ANY

# Floating point math type
# valid values are NOMATH (default) STANDARD FFP 68881 (same as 68882) IEEE
# Compared to the old version of this makefile, the link commands have
# been changed so that the MATH option also selects the proper math
# library to link with
MATH = MATH=IEEE

# Optimiser flags
OFLAGS = opt

# Defines; format is def=SYMBOL[=value]
DEFS = def=AMIGA_SC_6_1 def=ANSI_C def=HAVE_SYS_STAT_H def=HAVE_STRNICMP def=HAVE_GETCWD def=PIPES def=GP_INLINE=__inline $(GD_DEF) $(PNG_DEF)

# Other options; if you have SAS/C 6.57 or newer, you may wish to disable
# warning 317
COPTS = ign=304+306 #noerrhigh #errrexx

# Debug options
DEBUG = # Will be dbg=sf when called with smake -f makefile.amg debug
LNDBG = # Will be addsym when called with smake -f makefile.amg debug

# The directories where gnuplot and gnuplot.gih go, respectively
DEST     = C:
HELPDEST = S:

#
# ****************** End of Configuration section ****************************
# ********** No changes should be necessary beyond this point! ***************
#

#
# Miscellaneous setup
#

# Merge compiler flags
CFLAGS = $(COPTS) $(CPU) $(MATH) $(OFLAGS) $(DEFS) $(DEBUG) DATA=f

# NOTE: I have disabled the compilation rule for .oo files as described
# below, because when linking with sc (as opposed to slink), all object
# files not ending in .o must be prefied with the objname option!
#
# To simplify the handling of files that have grown so large that they
# must be compiled with the code=far option, the rules below have been
# set up. Now, if a file grows large, you only have to change its
# extension from .o to .oo, and the file will be compiled correctly.
# This must be done in the OBJS-variable below and in the corresponding 
# dependency-rule near the end of the file.

all: gnuplot demo/bf_test

# Normal compilation rule
.c.o:
	$(CC) $(CFLAGS) objname=$@ $<

# Compilation rule for large files
#.c.oo:
#	$(CC) $(CFLAGS) code=f objname=$@ $<

graphics.o: graphics.c plot.h setshow.h
	$(CC) $(CFLAGS) code=f objname=$@ $<

set.o: set.c plot.h setshow.h
	$(CC) $(CFLAGS) code=f objname=$@ $<

term.o: term.c term.h plot.h setshow.h bitmap.h $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
	$(CC) $(CFLAGS) idir=term code=f $(GD_INCLUDE) $(PNG_INCLUDE) $(Z_INCLUDE) objname=$@ $<

OBJS = alloc.o amiga.o binary.o bitmap.o command.o contour.o datafile.o \
       eval.o fit.o graph3d.o graphics.o help.o hidden3d.o internal.o \
       interpol.o matrix.o misc.o parse.o plot.o plot2d.o plot3d.o scanner.o \
       set.o show.o specfun.o standard.o stdfn.o term.o time.o util.o \
       util3d.o version.o

CSOURCE1 = alloc.c bf_test.c binary.c bitmap.c command.c set.c show.c 
CSOURCE2 = help.c graphics.c graph3d.o internal.c 
CSOURCE3 = misc.c eval.c parse.c plot.c plot2d.c plot3d.c scanner.c \
	standard.c stdfn.c 
CSOURCE4 = bitmap.c term.c util.c util3d.c version.c interpol.c fit.c matrix.c
CSOURCE5 = term/aed.trm term/ai.trm term/amiga.trm term/apollo.trm \
	term/atariaes.trm term/atarivdi.trm term/cgi.trm term/cgm.trm \
	term/compact.c term/corel.trm term/debug.trm term/driver.h \
	term/djsvga.trm term/dumb.trm term/dxf.trm term/dxy.trm term/eepic.trm \
	term/emxvga.trm term/epson.trm term/excl.trm term/fg.trm term/fig.trm \
	term/gif.trm term/gnugraph.trm
CSOURCE6 = term/gpic.trm term/gpr.trm term/grass.trm term/hp26.trm \
	term/hp2648.trm term/hp500c.trm term/hpgl.trm term/hpljii.trm \
	term/hppj.trm term/imagen.trm term/impcodes.h term/iris4d.trm \
	term/kyo.trm term/latex.trm term/linux.trm term/mac.trm \
	term/metafont.trm term/mgr.trm term/mif.trm term/multitos.trm \
	term/next.trm term/object.h term/pbm.trm term/pc.trm
CSOURCE7 = term/pm.trm term/png.trm term/post.trm term/pslatex.trm \
	term/pstricks.trm term/qms.trm term/regis.trm term/rgip.trm \
	term/sun.trm term/t410x.trm term/table.trm term/tek.trm \
	term/texdraw.trm term/tgif.trm term/tkcanvas.trm term/tpic.trm \
	term/unixpc.trm term/unixplot.trm term/v384.trm term/vws.trm \
	term/win.trm term/x11.trm term/xlib.trm
CSOURCE8 = contour.c specfun.c amiga.c
CORETERM = $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)

#gnuplot: $(OBJS)
#	slink from lib:c.o $(OBJS) to gnuplot\
#	lib $(GD_LIB) $(PNG_LIB) $(Z_LIB) lib:scmieee.lib lib:scnb.lib $(LNDBG) verbose

gnuplot: $(OBJS)
	$(CC) <WITH <
$(CFLAGS)
LINK TO $@
FROM $(OBJS) $(PNG_LIB) $(Z_LIB) $(GD_LIB) $(LNDBG)
<

#demo/bf_test: bf_test.o binary.o alloc.o
#	slink from lib:c.o bf_test.o binary.o alloc.o to demo/bf_test\
#	lib lib:scmieee.lib lib:scnb.lib
#	@echo "*N*NRun bf_test in demo subdirectory to make binary demo files*N"

demo/bf_test: bf_test.o binary.o alloc.o
	$(CC) $(CFLAGS) LINK TO $@ bf_test.o binary.o alloc.o
	@echo "*N*NRun bf_test in demo subdirectory to make binary demo files*N"

docs: docs/gnuplot.doc docs/doc2gih docs/doc2tex docs/doc2ms docs/checkdoc
	docs/doc2gih <docs/gnuplot.doc >docs/gnuplot.gih

docs/doc2gih: docs/doc2gih.c docs/termdoc.c
	$(CC) $(CFLAGS) idir= LINK TO docs/doc2gih FROM docs/doc2gih.c docs/termdoc.c

docs/doc2html: docs/doc2html.c docs/allterm.h docs/termdoc.c
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= LINK TO docs/doc2html FROM docs/doc2html.c docs/termdoc.c

docs/doc2tex: docs/doc2tex.c docs/allterm.h docs/termdoc.c
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= LINK TO docs/doc2tex FROM docs/doc2tex.c docs/termdoc.c

docs/doc2ms: docs/doc2ms.c docs/allterm.h docs/termdoc.c
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= LINK TO docs/doc2ms FROM docs/doc2ms.c docs/termdoc.c

docs/checkdoc: docs/checkdoc.c docs/allterm.h docs/termdoc.c 
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= LINK TO docs/checkdoc FROM docs/checkdoc.c docs/termdoc.c

docs/allterm.h: $(CORETERM)
	join term/\#?.trm as docs/allterm.h

clean:
	@-delete $(OBJS) bf_test.o quiet
	@-delete docs/\#?.o docs/\#?.lnk quiet

veryclean: clean
	@-delete demo/binary[1-3] fitdemo/fit.log quiet
	@-delete bf_test demo/fit.log gnuplot docs/gnuplot.gih quiet
	@-delete docs/doc2gih docs/doc2tex docs/doc2ms docs/checkdoc quiet

install: gnuplot docs/gnuplot.gih
	copy docs/gnuplot.gih $(HELPDEST)
	copy gnuplot $(DEST)

debug:
	smake -f makefile.amg DEBUG=dbg=sf LNDBG=addsym OFLAGS= all

#
# Dependencies; do not edit!
#
alloc.o: alloc.c plot.h
amiga.o: amiga.c
bf_test.o: bf_test.c
binary.o: binary.c plot.h
bitmap.o: bitmap.c bitmap.h plot.h
command.o: command.c plot.h setshow.h help.h
contour.o: contour.c plot.h
datafile.o: datafile.c plot.h fnproto.h binary.h setshow.h
eval.o: eval.c plot.h
fit.o: fit.c fit.h matrix.h plot.h
graph3d.o: graph3d.c plot.h setshow.h
help.o: help.c plot.h help.h
hidden3d.o: hidden3d.c plot.h setshow.h
internal.o: internal.c plot.h
interpol.o: interpol.c plot.h setshow.h
matrix.o: matrix.c matrix.h fit.h
misc.o: misc.c plot.h setshow.h help.h
parse.o: parse.c plot.h help.h
plot.o: plot.c plot.h setshow.h
plot2d.o: plot2d.c plot.h setshow.h fit.h binary.h help.h
plot3d.o: plot3d.c plot.h setshow.h binary.h help.h
scanner.o: scanner.c plot.h
show.o: show.c plot.h setshow.h
specfun.o: specfun.c plot.h
standard.o: standard.c plot.h
stdfn.o: stdfn.c stdfn.h
time.o: time.c plot.h setshow.h
util.o: util.c plot.h
util3d.o: util3d.c plot.h setshow.h
version.o: version.c